Adaptive Lenses Based on Soft Electroactive Materials

Dielectric elastomer-driven liquid prism enabling two-dimensional beam control

In this paper, a dielectric elastomer (DE)-driven liquid prism enabling two-dimensional beam control is proposed. The proposed liquid prism consists of a flexible driver and a liquid cavity. The glass plate is driven by DE to change the tilt angle of the liquid-solid interface for beam steering and field of view (FOV) tuning. The maximum optical deflection angle of 8.13° and response time of 76.77 ms were measured, the variable FOV capability was also verified. The proposed liquid prism can be used in beam modulation, microscope systems.

10× continuous optical zoom imaging using Alvarez lenses actuated by dielectric elastomers

Optical zoom is an essential function for many imaging systems including consumer electronics, biomedical microscopes, telescopes, and projectors. However, most optical zoom imaging systems have discrete zoom rates or narrow zoom ranges. In this work, a continuous optical zoom imaging system with a wide zoom range is proposed. It consists of a solid lens, two Alvarez lenses, and a camera with an objective. Each Alvarez lens is composed of two cubic phase plates, which have inverted freeform surfaces concerning each other. The movement of the cubic phase masks perpendicular to the optical axis is realized by the actuation of the dielectric elastomer. By applying actuation voltages to the dielectric elastomer, cubic phase masks are moved laterally and then the focal lengths of the two Alvarez lenses are changed. By adjusting the focal lengths of these two Alvarez lenses, the optical magnification is tuned. The proposed continuous optical zoom imaging system is built and the validity is verified by the experiments. The experimental results demonstrate that the zoom ratio is up to 10×, i.e., the magnification continuously changes from 1.58× to 15.80× when the lateral displacements of the cubic phase masks are about 1.0 mm. The rise and fall response times are 150 ms and 210 ms, respectively. The imaging resolution can reach 114 lp/mm during the optical zoom process. The proposed continuous optical imaging system is expected to be used in the fields of microscopy, biomedicine, virtual reality, etc.

Octopus-inspired deception and signaling systems from an exceptionally-stable acene variant

Multifunctional platforms that can dynamically modulate their color and appearance have attracted attention for applications as varied as displays, signaling, camouflage, anti-counterfeiting, sensing, biomedical imaging, energy conservation, and robotics. Within this context, the development of camouflage systems with tunable spectroscopic and fluorescent properties that span the ultraviolet, visible, and near-infrared spectral regions has remained exceedingly challenging because of frequently competing materials and device design requirements. Herein, we draw inspiration from the unique blue rings of the Hapalochlaena lunulata octopus for the development of deception and signaling systems that resolve these critical challenges. As the active material, our actuator-type systems incorporate a readily-prepared and easily-processable nonacene-like molecule with an ambient-atmosphere stability that exceeds the state-of-the-art for comparable acenes by orders of magnitude. Devices from this active material feature a powerful and unique combination of advantages, including straightforward benchtop fabrication, competitive baseline performance metrics, robustness during cycling with the capacity for autonomous self-repair, and multiple dynamic multispectral operating modes. When considered together, the described exciting discoveries point to new scientific and technological opportunities in the areas of functional organic materials, reconfigurable soft actuators, and adaptive photonic systems.

A Compact Two-Dimensional Varifocal Scanning Imaging Device Actuated by Artificial Muscle Material

This paper presents a compact two-dimensional varifocal-scanning imaging device, with the capability of continuously variable focal length and a large scanning range, actuated by artificial muscle material. The varifocal function is realized by the principle of laterally shifting cubic phase masks and the scanning function is achieved by the principle of the decentered lens. One remarkable feature of these two principles is that both are based on the lateral displacements perpendicular to the optical axis. Artificial muscle material is emerging as a good choice of soft actuators capable of high strain, high efficiency, fast response speed, and light weight. Inspired by the artificial muscle, the dielectric elastomer is used as an actuator and produces the lateral displacements of the Alvarez lenses and the decentered lenses. A two-dimensional varifocal scanning imaging device prototype was established and validated through experiments to verify the feasibility of the proposed varifocal-scanning device. The results showed that the focal length variation of the proposed varifocal scanning device is up to 4.65 times higher (31.6 mm/6.8 mm), and the maximum scanning angle was 26.4°. The rise and fall times were 110 ms and 185 ms, respectively. Such a varifocal scanning device studied here has the potential to be used in consumer electronics, endoscopy, and microscopy in the future.

Varifocal liquid lens driven by a conical dielectric elastomer actuator

A varifocal lens is an important part of optical systems with applications in biomedicine, photography, smartphones, and virtual reality. In this paper, we propose and demonstrate a varifocal liquid lens driven by a conical dielectric elastomer actuator. When the conical dielectric elastomer is subjected to an actuation voltage, the conical dielectric elastomer works as an out-plane actuator and makes the surface curvature of the liquid droplet increase; then the focal length of the proposed varifocal liquid lens changes. The overall dimensions of the proposed varifocal liquid lens are 9.4 mm in diameter and 12.5 mm in height. The focal length tuning range is 15.07mm∼9.50mm when the actuation voltage increases from 0 kV to 5.0 kV. The focal power variation of the proposed varifocal liquid lens is 35.5 D. The rise and fall times of the proposed varifocal liquid lens are 215 ms and 293 ms, respectively. The ability of the proposed liquid lens to focus on objects at different distances without any moving parts is demonstrated. The compact varifocal liquid lens driven by the conical dielectric elastomer actuator in the current study has the potential to be used in various compact imaging systems in the future.

A DIY Fabrication Approach for Ultra-Thin Focus-Tunable Liquid Lens Using Electrohydrodynamic Pump

Demand for variable focus lens is increasing these days due to the rapid development of smart mobile devices and drones. However, conventional mechanical systems for lenses are generally complex, cumbersome, and rigid (e.g., for motors and gears). This research proposes a simple and compact liquid lens controlled by an electro hydro dynamics (EHD) pump. In our study, we propose a do-it-yourself (DIY) method to fabricate the low-cost EHD lens. The EHD lens consists of a polypropylene (PP) sheet for the exterior, a copper sheet for the electrodes, and an acrylic elastomer for the fluidic channel where dielectric fluid and pure water are filled. We controlled the lens magnification by changing the curvature of the liquid interface between the dielectric fluid and pure water. We evaluated the magnification performance of the lens. Moreover, we also established a numerical model to characterize the lens performance. We expect to contribute to the miniaturization of focus-tunable lenses.

Polyvinyl chloride gels microlens array with a well-controlled curvature obtained by solvent evaporation under DC electric fields

In this paper, polyvinyl chloride (PVC) gels microlens arrays (MLAs) with controllable curvatures were prepared by evaporation of the solvent under DC electric fields. In order to obtain these arrays, the PVC gel solution was first injected into the cofferdam of a ring array patterned electrode substrate. Upon polarization under DC electric field, the electric charge injected from the cathode was carried by the plasticizers towards the anode to accumulate on its surface. After complete evaporation of the solvent, the PVC gels formed stable MLAs. The focal length of the formed MLAs obtained after evaporation of the 100 µL PVC gel solvent under 30 V DC field was 8.68 mm. The focal length of the as-obtained PVC gel-based MLAs can be well-controlled by merely tuning the strength of the electric field or by changing the volume of the PVC gel solution. Thus, it can be concluded that the proposed methodology looks very promising for future fabrication of MLAs with uniform size in larger areas.

Engineering Aspheric Liquid Crystal Lenses by Using the Transmission Electrode Technique

The transmission electrode technique has been recently proposed as a versatile method to obtain various types of liquid-crystal (LC) lenses. In this work, an equivalent electric circuit and new analytical expressions based on this technique are developed. In addition, novel electrode shapes are proposed in order to generate different phase profiles. The analytical expressions depend on manufacturing parameters that have been optimized by using the least squares method. Thanks to the proposed design equations and the associated optimization, the feasibility of engineering any kind of aspheric LC lenses is demonstrated, which is key to obtain aberration-free lenses. The results are compared to numerical simulations validating the proposed equations. This novel technique, in combination with the proposed design equations, opens a new path for the design and fabrication of LC lenses and even other types of adaptive-focus lenses based on voltage control.

A Feasibility Study of a Novel Piezo MEMS Tweezer for Soft Materials Characterization

The opportunity to know the status of a soft tissue (ST) in situ can be very useful for microsurgery or early diagnosis. Since normal and diseased tissues have different mechanical characteristics, many systems have been developed to carry out such measurements locally. Among them, MEMS tweezers are very relevant for their efficiency and relative simplicity compared to the other systems. In this paper a novel piezoelectric MEMS tweezer for soft materials analysis and characterization is presented. A theoretical approach has developed in order to carry out the values of the stiffness, the equivalent Young’s modulus, and the viscous damping coefficients of the analyzed samples. The method has been validated by using both Finite Element Analysis and data from the literature.

Recent Advances in Adaptive Liquid Crystal Lenses

An adaptive-focus lens is a device that is capable of tuning its focal length by means of an external stimulus. Numerous techniques for the demonstration of such devices have been reported thus far. Moving beyond traditional solutions, several new approaches have been proposed in recent years based on the use of liquid crystals, which can have a great impact in emerging applications. This work focuses on the recent advances in liquid crystal lenses with diameters larger than 1 mm. Recent demonstrations and their performance characteristics are reviewed, discussing the advantages and disadvantages of the reported technologies and identifying the challenges and future prospects in the active research field of adaptive-focus liquid crystal (LC) lenses.