A Review of Tunable Acoustic Metamaterials

Dynamic Schwarz Meta-Foams: Customizable Solutions for Environmental Noise Reduction

In an era marked by increasing environmental challenges affecting human well-being, traditional acoustic materials struggle to effectively handle the diverse and multi-frequency nature of harmful environmental noises. This has spurred a demand for innovative acoustic metamaterial solutions by utilizing sustainable design strategies. This research introduces tunable Schwarz metamaterial capable of transforming into a soft meta-foam to solve the complex problems of varying environmental noises. This study primarily focuses on adjusting single to multiple sound-blocking bandgaps mechanism using a multi-layered approach, incorporating the Schwarz P-type triply periodic minimal surface (TPMS) and its elective soft foam counterpart, known as tunable Schwarz meta-foams (TSMF-x). The tunable design parameters of the unit cell, multi-layered TPMS, and soft programmable TSMF-lichen version are comprehensively explored including a fire-safety test. The results demonstrate these enhanced flame retardant meta-foam families have the potential to be used for mid-to-high-frequency environmental noises in industrial equipment and smart homes for sustainable architecture and environmental health applications.

An adjustable acoustic metamaterial cell using a magnetic membrane for tunable resonance

Acoustic metamaterials are growing in popularity for sound applications including noise control. Despite this, there remain significant challenges associated with the fabrication of these materials for the sub-100 Hz regime, because acoustic metamaterials for such frequencies typically require sub-mm scale features to control sound waves. Advances in additive manufacturing technologies have provided practical methods for rapid fabrication of acoustic metamaterials. However, there is a relatively high sensitivity of their resonant characteristics to sub-mm deviations in geometry, pushing the limits of additive manufacturing. One way of overcoming this is via active control of device resonance. Here, an acoustic metamaterial cell with adjustable resonance is demonstrated for the sub-100 Hz regime. A functionally superparamagnetic membrane-devised to facilitate the fabrication process by eliminating magnetic poling requirements-is engineered using stereolithography, and its mechanical and acoustic properties are experimentally measured using laser Doppler vibrometry and electret microphone testing, with a mathematical model developed to predict the cell response. It is demonstrated that an adjustable magnetic acoustic metamaterial can be fabricated at ultra-subwavelength dimensions ( ≤ λ /77.5), exhibiting adjustable resonance from 88.73 to 86.63 Hz. It is anticipated that this research will drive new innovations in adjustable metamaterials, including wider frequency ranges.

Observation of vortex-string chiral modes in metamaterials

As hypothetical topological defects in the geometry of spacetime, vortex strings could have played many roles in cosmology, and their distinct features can provide observable clues about the early universe's evolution. A key feature of vortex strings is that they can interact with Weyl fermionic modes and support massless chiral-anomaly states along strings. To date, despite many attempts to detect vortex strings in astrophysics or to emulate them in artificially created systems, observation of these vortex-string chiral modes remains experimentally elusive. Here we report experimental observations of vortex-string chiral modes using a metamaterial system. This is implemented by inhomogeneous perturbation of Yang-monopole phononic metamaterials. The measured linear dispersion and modal profiles confirm the existence of topological modes bound to and propagating along the string with the chiral anomaly. Our work provides a platform for studying diverse cosmic topological defects in astrophysics and offers applications as topological fibres in communication techniques.

A sustainable acoustic customization of open porous materials using recycled plastics

Foams are commonly used as sound absorbers and thermal insulators for many industrial and construction applications. The insulating materials market is currently dominated by inorganic fibres like glass and mineral wool, as well as plastic foams. However, worldwide plastics consumption produces huge amounts of waste, generating concerns about soil, air and especially seawater pollution. Hence, new methods for recycling marine microplastic litter according to cleaner production criteria are being sought. This paper presents a novel, sustainable and eco-friendly foamy material made of microplastic waste, namely polyethylene terephthalate (PET) and polystyrene (PS), incorporated into a bio-based matrix. Samples with different compositions were prepared and then characterized for sound absorption properties. Evidence is presented of very good acoustic performances and of how the acoustic characteristics of the end product can be customized using different microplastic content and type. This allows envisioning many industrial and civil applications for this novel open-cell material.

Moth wings as sound absorber metasurface

In noise control applications, a perfect metasurface absorber would have the desirable traits of not only mitigating unwanted sound, but also being much thinner than the wavelengths of interest. Such deep-subwavelength performance is difficult to achieve technologically, yet moth wings, as natural metamaterials, offer functionality as efficient sound absorbers through the action of the numerous resonant scales that decorate their wing membrane. Here, we quantify the potential for moth wings to act as a sound-absorbing metasurface coating for acoustically reflective substrates. Moth wings were found to be efficient sound absorbers, reducing reflection from an acoustically hard surface by up to 87% at the lowest frequency tested (20 kHz), despite a thickness to wavelength ratio of up to 1/50. Remarkably, after the removal of the scales from the dorsal surface the wing's orientation on the surface changed its absorptive performance: absorption remains high when the bald wing membrane faces the sound but breaks down almost completely in the reverse orientation. Numerical simulations confirm the strong influence of the air gap below the wing membrane but only when it is adorned with scales. The finding that moth wings act as deep-subwavelength sound-absorbing metasurfaces opens the door to bioinspired, high-performance sound mitigation solutions.

Design Optimization of Three-Layered Metamaterial Acoustic Absorbers Based on PVC Reused Membrane and Metal Washers

Waste management represents a critical issue that industrialized countries must necessarily deal with. Sustainable architecture involves the reuse of materials with the aim of significantly reducing the amount of waste produced. In this study, a new layered membrane metamaterial was developed based on three layers of a reused PVC membrane and reused metal washers attached. The membranes were fixed to a rigid support, leaving a cavity between the stacked layers. The samples were used to measure the sound absorption coefficient with an impedance tube. Different configurations were analyzed, changing the number of masses attached to each layer and the geometry of their position. These measurements were subsequently used to train a model based on artificial neural networks for the prediction of the sound absorption coefficient. This model was then used to identify the metamaterial configuration that returns the best absorption performance. The designed metamaterial behaves like an acoustic absorber even at low frequencies.

Magnetoactive acoustic metamaterials based on nanoparticle-enhanced diaphragm

Magnetoactive membrane-type acoustic metamaterials are fabricated by coating a layer of magnetic nanoparticles on the polyethylene (PE) membranes and their vibration characters are investigated experimentally. From our experiments, we discovered that, under different magnetic fields by varying the distance between a magnet and the membranes, such membranes exhibit tunable vibration eigenfrequencies (the shift towards lower frequencies), which is caused by the variation of the effective mass density and effective tension coefficient resulted from the second derivative of the magnetic field. The strong magnetic force between the layer of magnetic nanoparticles and the magnet enhances the eigenfrequency shift. A spring oscillator model is proposed and it agrees well with the experimental results. We also experimentally observed that the vibration radius, effective mass density, and effective tension coefficient of the membranes can enormously affect the eigenfrequencies of the membranes. We believe that this type of metamaterials may open up some potential applications for acoustic devices with turntable vibration properties.

A Novel NaCl Concentration Detection Method Based on Ultrasonic Impedance Method

In this article, we propose a novel method for real-time detection of NaCl concentration based on ultrasonic impedance method. Specifically, our method is based on the fact that different concentration of NaCl leads to differences in acoustic characteristics of ultrasonic waves. We conducted an experimental study on the relationship between the concentration and the amplitude of ultrasonic echo. Our evaluations show that our approach can push the linear fitting degree r² to 0.9967. Then we used the BP neural network to classify and identify the collected sample data and achieved 100% classification accuracy. We also established a concentration-amplitude prediction model based on the BP neural network, and the result shows that the error between the predicted value and the ground truth is less than 8.36%. This method realizes non-contact measurement and can be applied to real-time monitoring of NaCl concentration in large, closed containers.

Physics of surface vibrational resonances: pillared phononic crystals, metamaterials, and metasurfaces

The introduction of engineered resonance phenomena on surfaces has opened a new frontier in surface science and technology. Pillared phononic crystals, metamaterials, and metasurfaces are an emerging class of artificial structured media, featuring surfaces that consist of pillars-or branching substructures-standing on a plate or a substrate. A pillared phononic crystal exhibits Bragg band gaps, while a pillared metamaterial may feature both Bragg band gaps and local resonance hybridization band gaps. These two band-gap phenomena, along with other unique wave dispersion characteristics, have been exploited for a variety of applications spanning a range of length scales and covering multiple disciplines in applied physics and engineering, particularly in elastodynamics and acoustics. The intrinsic placement of pillars on a semi-infinite surface-yielding a metasurface-has similarly provided new avenues for the control and manipulation of wave propagation. Classical waves are admitted in pillared media, including Lamb waves in plates and Rayleigh and Love waves along the surfaces of substrates, ranging in frequency from hertz to several gigahertz. With the presence of the pillars, these waves couple with surface resonances richly creating new phenomena and properties in the subwavelength regime and in some applications at higher frequencies as well. At the nanoscale, it was shown that atomic-scale resonances-stemming from nanopillars-alter the fundamental nature of conductive thermal transport by reducing the group velocities and generating mode localizations across the entire spectrum of the constituent material well into the terahertz regime. In this article, we first overview the history and development of pillared materials, then provide a detailed synopsis of a selection of key research topics that involve the utilization of pillars or similar branching substructures in different contexts. Finally, we conclude by providing a short summary and some perspectives on the state of the field and its promise for further future development.

Ultrasound Imaging by Thermally Tunable Phononic Crystal Lens

This work demonstrates the detections and mappings of a solid object using a thermally tunable solid-state phononic crystal lens at low frequency for potential use in future long-distance detection. The phononic crystal lens is infiltrated with a polyvinyl alcohol-based poly n-isopropyl acrylamide (PVA-PNIPAm) bulk hydrogel polymer. The hydrogel undergoes a volumetric phase transition due to a temperature change leading to a temperature-dependent sound velocity and density. The temperature variation from 20 °C to 39 °C changes the focal length of the tunable solid-state lens by 1 cm in the axial direction. This thermo-reversible tunable focal length lens was used in a monostatic setup for one- and two-dimensional mapping scans in both frequency domain echo-intensity and temporal domain time-of-flight modes. The experimental results illustrated 1.03 ± 0.15λ and 2.35 ± 0.28λ on the lateral and axial minimum detectable object size. The experiments using the tunable lens demonstrate the capability to detect objects by changing the temperature in water without translating an object, source, or detector. The time-of-flight mode modality using the tunable solid-state phononic lens increases the signal-to-noise ratio compared to a conventional phononic crystal lens.

Additive Manufacture of Small-Scale Metamaterial Structures for Acoustic and Ultrasonic Applications

Acoustic metamaterials are large-scale materials with small-scale structures. These structures allow for unusual interaction with propagating sound and endow the large-scale material with exceptional acoustic properties not found in normal materials. However, their multi-scale nature means that the manufacture of these materials is not trivial, often requiring micron-scale resolution over centimetre length scales. In this review, we bring together a variety of acoustic metamaterial designs and separately discuss ways to create them using the latest trends in additive manufacturing. We highlight the advantages and disadvantages of different techniques that act as barriers towards the development of realisable acoustic metamaterials for practical audio and ultrasonic applications and speculate on potential future developments.

A Metawindow with Optimised Acoustic and Ventilation Performance

Crucial factors in window performance, such as natural ventilation and noise control, are generally conceived separately, forcing users to choose one over the other. To solve this dualism, this study aimed to develop an acoustic metamaterial (AMM) ergonomic window design to allow noise control without dependence on the natural ventilation duration and vice versa. First, the finite element method (FEM) was used to investigate the noise control performance of the acoustic metawindow (AMW) unit, followed by anechoic chamber testing, which also served as the validation of the FEM models. Furthermore, FEM analysis was used to optimise the acoustic performance and assess the ventilation potential. The numerical and experimental results exhibited an overall mean sound reduction of 15 dB within a bandwidth of 380 to 5000 Hz. A good agreement between the measured and numerical results was obtained, with a mean variation of 30%. Therefore, the AMW unit optimised acoustic performance, resulting in a higher noise reduction, especially from 50 to 500 Hz. Finally, most of the AMW unit configurations are suitable for natural ventilation, and a dynamic tuned ventilation capacity can be achieved for particular ranges by adjusting the window’s ventilation opening. The proposed designs have potential applications in building acoustics and engineering where natural ventilation and noise mitigation are required to meet regulations simultaneously.

Optical Realization of Wave-Based Analog Computing with Metamaterials

Recently, the study of analog optical computing raised renewed interest due to its natural advantages of parallel, high speed and low energy consumption over conventional digital counterpart, particularly in applications of big data and high-throughput image processing. The emergence of metamaterials or metasurfaces in the last decades offered unprecedented opportunities to arbitrarily manipulate the light waves within subwavelength scale. Metamaterials and metasurfaces with freely controlled optical properties have accelerated the progress of wave-based analog computing and are emerging as a practical, easy-integration platform for optical analog computing. In this review, the recent progress of metamaterial-based spatial analog optical computing is briefly reviewed. We first survey the implementation of classical mathematical operations followed by two fundamental approaches (metasurface approach and Green’s function approach). Then, we discuss recent developments based on different physical mechanisms and the classical optical simulating of quantum algorithms are investigated, which may lead to a new way for high-efficiency signal processing by exploiting quantum behaviors. The challenges and future opportunities in the booming research field are discussed.

Omindirectional Non-Reciprocity via 2D Modulated Radial Sonic Crystals

In this paper we report on nonreciprocal wave propagation in a 2D radial sonic crystal with space–time varying properties. We show that a modulation traveling along the radial direction reflects in omni-directional and isotropic nonreciprocal wave propagation between inner and outer shells. The nonreciprocal behavior is verified both analytically and numerically, demonstrating that space–time radial crystals can be employed as one-way emitter or receiver of acoustic or elastic signals.

Dispersion tuning and route reconfiguration of acoustic waves in valley topological phononic crystals

The valley degree of freedom in crystals offers great potential for manipulating classical waves, however, few studies have investigated valley states with complex wavenumbers, valley states in graded systems, or dispersion tuning for valley states. Here, we present tunable valley phononic crystals (PCs) composed of hybrid channel-cavity cells with three tunable parameters. Our PCs support valley states and Dirac cones with complex wavenumbers. They can be configured to form chirped valley PCs in which edge modes are slowed to zero group velocity states, where the energy at different frequencies accumulates at different designated locations. They enable multiple functionalities, including tuning of dispersion relations for valley states, robust routing of surface acoustic waves, and spatial modulation of group velocities. This work may spark future investigations of topological states with complex wavenumbers in other classical systems, further study of topological states in graded materials, and the development of acoustic devices.

The valley degree of freedom gives additional flexibility to tunable phononic and photonic crystals. Here, the authors realise a honeycomb phononic structure where both the size of the cavities and of the air channel can be actively tuned, allowing several functionalities in a broad frequency range.

Active control of graphene-based membrane-type acoustic metamaterials using a low voltage

Membrane-type acoustic metamaterials for acoustic insulation applications have been attracting ever increasing attention. However, the first anti-resonant frequency of these acoustic metamaterials is fixed once the membrane type is chosen. Here, we propose a novel yet convenient strategy to actively adjust the anti-resonant frequency of the membrane. The poly(vinyl alcohol)/graphene (PVA/GR) nanocomposite membrane is introduced into the acoustic metamaterial, the effective modulus of which is tunable by applying an external electric field. As a result, the first anti-resonant frequency of membrane-type acoustic metamaterials can be actively tuned between 369.2 to 420 Hz, leading to excellent sound attenuation properties. The noise reduction frequency can be actively modulated by DC voltage. Moreover, the change in frequency is consistent with the modulus variation of the PVA/GR nanocomposite membrane when the graphene concentration is varied. In addition, the conductive PVA/GR nanocomposite membrane also exhibits good electromagnetic interference shielding performance in the frequency range of 8-12 GHz. Being actively tunable by an external electric field, this PVA/GR nanocomposite membrane-based acoustic metamaterial is very promising for use in frequency-tunable acoustic insulation applications.

On the Frequency Up-Conversion Mechanism in Metamaterials-Inspired Vibro-Impact Structures

Conventional acoustic absorbers like foams, fiberglass or liners are used commonly in structures for industrial, infrastructural, automotive and aerospace applications to mitigate noise. However, these have limited effectiveness for low-frequencies (LF, <~500 Hz) due to impractically large mass or volume requirements. LF content being less evanescent is a major contributor to environmental noise pollution and induces undesirable structural responses causing diminished efficiency, comfort, payload integrity and mission capabilities. There is, therefore a need to develop lightweight, compact, structurally-integrated solutions to mitigate LF noise in several applications. Inspired by metamaterials, tuned mass-loaded membranes as vibro-impact attachments on a baseline structure are considered to investigate their performance as an LF acoustic barrier. LF incident waves are up-converted via impact to higher modes in the baseline structure which may then be effectively mitigated using conventional means. Such Metamaterials-Inspired Vibro-Impact Structures (MIVIS) could be tuned to match the dominant frequency content of LF acoustic sources. Prototype MIVIS unit cells were designed and tested to study energy transfer mechanism via impact-induced frequency up-conversion and sound transmission loss. Structural acoustic simulations were done to predict responses using models based on normal incidence transmission loss tests. Simulations were validated using experiments and utilized to optimize the energy up-conversion mechanism using parametric studies. Up to 36 dB of sound transmission loss increase is observed at the anti-resonance frequency (326 Hz) within a tunable LF bandwidth of about 300 Hz for the MIVS under white noise excitation. Whereas, it is found that under monotonic excitations, the impact-induced up-conversion redistributes the incident LF monotone to the back plate’s first mode in the transmitted spectrum. This up-conversion could enable further broadband transmission loss via subsequent dissipation in conventional absorbers. Moreover, this approach while minimizing parasitic mass addition retains or could conceivably augment primary functionalities of the baseline structure. Successful transition to applications could enable new mission capabilities for aerospace and military vehicles and help create quieter built environments.

Tunable/Reconfigurable Metasurfaces: Physics and Applications

Metasurfaces, ultrathin metamaterials constructed by planar meta-atoms with tailored electromagnetic (EM) responses, have attracted tremendous attention due to their exotic abilities to freely control EM waves. With active elements incorporated into metasurface designs, one can realize tunable and/or reconfigurable metadevices with functionalities controlled by external stimuli, opening a new platform to dynamically manipulate EM waves. In this article, we briefly review recent progress on tunable/reconfigurable metasurfaces, focusing on their working mechanisms and practical applications. We first describe available approaches, categorized into different classes based on external stimuli applied, to realize homogeneous tunable/reconfigurable metasurfaces, which can offer uniform manipulations on EM waves. We next summarize recent achievements on inhomogeneous tunable/reconfigurable metasurfaces with constitutional meta-atoms locally tuned by external knobs, which can dynamically control the wave-fronts of EM waves. We conclude this review by presenting our own perspectives on possible future directions and existing challenges in this fast developing field.