Fuzzy Logic Controller Parameter Optimization Using Metaheuristic Cuckoo Search Algorithm for a Magnetic Levitation System

Optimizing Multiple Entropy Thresholding by the Chaotic Combination Strategy Sparrow Search Algorithm for Aggregate Image Segmentation

Aggregate measurement and analysis are critical for civil engineering. Multiple entropy thresholding (MET) is inefficient, and the accuracy of related optimization strategies is unsatisfactory, which results in the segmented aggregate images lacking many surface roughness and aggregate edge features. Thus, this research proposes an autonomous segmentation model (i.e., PERSSA-MET) that optimizes MET based on the chaotic combination strategy sparrow search algorithm (SSA). First, aiming at the characteristics of the many extreme values of an aggregate image, a novel expansion parameter and range-control elite mutation strategies were studied and combined with piecewise mapping, named PERSSA, to improve the SSA's accuracy. This was compared with seven optimization algorithms using benchmark function experiments and a Wilcoxon rank-sum test, and the PERSSA's superiority was proved with the tests. Then, PERSSA was utilized to swiftly determine MET thresholds, and the METs were the Renyi entropy, symmetric cross entropy, and Kapur entropy. In the segmentation experiments of the aggregate images, it was proven that PERSSA-MET effectively segmented more details. Compared with SSA-MET, it achieved 28.90%, 12.55%, and 6.00% improvements in the peak signal-to-noise ratio (PSNR), the structural similarity (SSIM), and the feature similarity (FSIM). Finally, a new parameter, overall merit weight proportion (OMWP), is suggested to calculate this segmentation method's superiority over all other algorithms. The results show that PERSSA-Renyi entropy outperforms well, and it can effectively keep the aggregate surface texture features and attain a balance between accuracy and speed.

An Efficient Chicken Search Optimization Algorithm for the Optimal Design of Fuzzy Controllers

A proposed architecture to design the optimal parameters of Membership Functions (MFs) of Type-1 Fuzzy Logic Systems (T1FLSs) using the Chicken Search Optimization (CSO) is applied to three Fuzzy Logic Controllers (FLCs) in this paper. Two types of MFs are considered in the study: triangular and trapezoidal ones. The performance and efficiency of the CSO algorithm are particularly good when perturbations are added during the execution in each control problem. Two benchmark control problems: Water Tank Controller and Inverted Pendulum Controller are considered for testing the proposed approach. Also, the optimal design of a fuzzy controller for trajectory tracking of an Autonomous Mobile Robot (AMR) is considered to test the CSO. The main goal is to highlight the efficiency of CSO algorithm in finding optimal fuzzy controllers of non-linear plants. Two types of perturbations are considered in each control problem. Results show that the CSO algorithm presents excellent results in the field of Fuzzy Logic Controllers. Two types of Fuzzy Inference Systems: Takagi-Sugeno and Mamdani FLSs, are implemented in this paper. The most important metrics usually applied in control are used in this paper, such as: Integral Time Absolute Error (ITAE), Integral Time Squared Error (ITSE), Integral Absolute Error (IAE), Integral Square Error (ISE), Mean Square Error (MSE), and Root Mean Square Error (RMSE).

A Comparison of Fuzzy-Based Energy Management Systems Adjusted by Nature-Inspired Algorithms

The growing energy demand around the world has increased the usage of renewable energy sources (RES) such as photovoltaic and wind energies. The combination of traditional power systems and RESs has generated diverse problems due especially to the stochastic nature of RESs. Microgrids (MG) arise to address these types of problems and to increase the penetration of RES to the utility network. A microgrid includes an energy management system (EMS) to operate its components and energy sources efficiently. The objectives pursued by the EMS are usually economically related to minimizing the operating costs of the MG or maximizing its income. However, due to new regulations of the network operators, a new objective related to the minimization of power peaks and fluctuations in the power profile exchanged with the utility network has taken great interest in recent years. In this regard, EMSs based on off-line trained fuzzy logic control (FLC) have been proposed as an alternative approach to those based on on-line optimization mixed-integer linear (or nonlinear) programming to reduce computational efforts. However, the procedure to adjust the FLC parameters has been barely addressed. This parameter adjustment is an optimization problem itself that can be formulated in terms of a cost/objective function and is susceptible to being solved by metaheuristic nature-inspired algorithms. In particular, this paper evaluates a methodology for adjusting the FLC parameters of the EMS of a residential microgrid that aims to minimize the power peaks and fluctuations on the power profile exchanged with the utility network through two nature-inspired algorithms, namely particle swarm optimization and differential evolution. The methodology is based on the definition of a cost function to be optimized. Numerical simulations on a specific microgrid example are presented to compare and evaluate the performances of these algorithms, also including a comparison with other ones addressed in previous works such as the Cuckoo search approach. These simulations are further used to extract useful conclusions for the FLC parameters adjustment for off-line-trained EMS based designs.

A survey of Type-2 fuzzy logic controller design using nature inspired optimization

In this paper, we are presenting a survey of research works dealing with Type-2 fuzzy logic controllers designed using optimization algorithms inspired on natural phenomena. Also, in this review, we analyze the most popular optimization methods used to find the important parameters on Type-1 and Type-2 fuzzy logic controllers to improve on previously obtained results. To this end have included a summary of the results obtained from the web of science database to observe the recent trend of using optimization methods in the area of optimal type-2 fuzzy logic control design. Also, we have made a comparison among countries of the network of researchers using optimization methods to analyze the distribution and impact of the papers.

Genetic Algorithm Approach to Design of Multi-Layer Perceptron for Combined Cycle Power Plant Electrical Power Output Estimation

In this paper a genetic algorithm (GA) approach to design of multi-layer perceptron (MLP) for combined cycle power plant power output estimation is presented. Dataset used in this research is a part of publicly available UCI Machine Learning Repository and it consists of 9568 data points (power plant operating regimes) that is divided on training dataset that consists of 7500 data points and testing dataset containing 2068 data points. Presented research was performed with aim of increasing regression performances of MLP in comparison to ones available in the literature by utilizing heuristic algorithm. The GA described in this paper is performed by using mutation and crossover procedures. These procedures are utilized for design of 20 different chromosomes in 50 different generations. MLP configurations that are designed with GA implementation are validated by using Bland - Altman (B-A) analysis. By utilizing GA, MLP with five hidden layers of 80,25,65,75 and 80 nodes, respectively, is designed. For aforementioned MLP, k - fold cross-validation is performed in order to examine its generalization performances. The Root Mean Square Error ( R M S E ) value achieved with aforementioned MLP is 4.305 , that is significantly lower in comparison with MLP presented in available literature, but still higher than several complex algorithms such as KStar and tree based algorithms.