Development of a Novel Shaft Dryer for Coal-Based Green Needle Coke Drying Process

A Novel Rotary Dryer Filled with Alumina Ceramic Beads for the Treatment of Industrial Wastewaters: Numerical Simulation and Experimental Study

In this study, a new type of rotary dryer filled with inert alumina ceramic bead (ACB) fillers was introduced to treat the industrial wastewater, e.g., the high-salt wastewater and landfill leachate. Numerical simulations based on the Discrete Element Method (DEM) on the motion trajectory of ACB fillers in the rotary dryer were conducted, and the parameters of flight structure, rotational speed, and filling degree on the dynamic behavior of ACB fillers were optimized. Under various rotational speeds and filling degrees, the experimental results fit the numerical-simulated results very well. The optimized flight configuration was the straight flights with a length of 65 mm, and the optimized rotational speed and filling degree were 35 rpm and 15%, respectively. Under the optimized condition, both the response variables, the mass of particles in the airborne phase (MAP) and the percentage of occupied area in the airborne region (OAR), have the optimal values, in which the dryer will have a better drying performance. Besides, the lower-right area of the drum is empty which is convenient for the installation of the inlet pipe. The drying experiments of industrial wastewaters were also studied using this ACB filled rotary drum dryer under the optimized conditions. Under the optimal operational conditions, the evaporation capacities of the high-salt wastewater and landfill leachate could reach as high as 49.7 kg/h and 90 kg/h, respectively. This study highlights the integration of evaporation and drying processes of this novel ACB filled rotary dryer and provides an efficient and zero-liquid-emission strategy for the thermal treatment of industrial wastewater.

Thermogravimetric Determination of the Kinetics of Petroleum Needle Coke Formation by Decantoil Thermolysis

This work presents the results of thermogravimetric analysis of decantoil. The microstructure of the extracted petroleum coke during the thermolysis of decantoil in an inert nitrogen atmosphere at 1000 °C was studied by scanning electron microscopy and interpreted as acicular. The model free kinetic approach based on Friedman's isoconversion method was used to calculate the kinetic characteristics of decantoil thermolysis-activation energy and pre-exponential factor. The individual hydrocarbon composition of decantoil was determined by gas chromatography mass spectrometry, which was used to determine the activation energy of evaporation of its fractions. The total energy spent on the chemical reactions of cracking and thermopolycondensation was determined when the degree of decantoil conversion was changed from 0.1 to 0.9.