Architecture and Viability of the Biofilms Formed by Nine Listeria Strains on Various Hydrophobic and Hydrophilic Materials

Biofilm formation of the food spoiler Brochothrix thermosphacta on different industrial surface materials using a biofilm reactor

Brochothrix thermosphacta is considered as a major food spoiler bacteria. This study evaluates biofilm formation by B. thermosphacta CD337(2) - a strong biofilm producer strain - on three food industry materials (polycarbonate (PC), polystyrene (PS), and stainless steel (SS)). Biofilms were continuously grown under flow at 25 °C in BHI broth in a modified CDC biofilm reactor. Bacterial cells were enumerated by plate counting, and biofilm spatial organization was deciphered by combining confocal laser scanning microscopy and image analysis. The biofilms had the same growth kinetics on all three materials and reach 8log CFU/cm2 as maximal concentration. Highly structured biofilms were observed on PC and PS, but less structured ones on SS. This difference was confirmed by structural quantification analysis using the image analysis software tool BiofilmQ. Biofilm on SS show less roughness, density, thickness and volume. The biofilm 3D structure seemed to be related to the coupon topography and roughness. The materials used in this study do not affect biofilm growth. However, their roughness and topography affect the biofilm architecture, which could influence biofilm behaviour.

Cross-contamination of mature Listeria monocytogenes biofilms from stainless steel surfaces to chicken broth before and after the application of chlorinated alkaline and enzymatic detergents

The objectives of this study were, firstly, to compare a conventional (i.e., chlorinated alkaline) versus an alternative (chlorinated alkaline plus enzymatic) treatment effectivity for the elimination of biofilms from different L. monocytogenes strains (CECT 5672, CECT 935, S2-bac and EDG-e). Secondly, to evaluate the cross-contamination to chicken broth from non-treated and treated biofilms formed on stainless steel surfaces. Results showed that all L. monocytogenes strains were able to adhere and develop biofilms at approximately the same growth levels (≈5.82 log CFU/cm²). When non-treated biofilms were put into contact with the model food, obtained an average transference rate of potential global cross-contamination of 20.4%. Biofilms treated with the chlorinated alkaline detergent obtained transference rates similar to non-treated biofilms as a high number of residual cells (i.e., around 4 to 5 Log CFU/cm²) were present on the surface, except for EDG-e strain on which transference rate diminished to 0.45%, which was related to the protective matrix. Contrarily, the alternative treatment was shown to not produce cross-contamination to the chicken broth due to its high effectivity for biofilm control (<0.50% of transference) except for CECT 935 strain that had a different behavior. Therefore, changing to more intense cleaning treatments in the processing environments can reduce risk of cross-contamination.

Rapid-Response Magnetic Enrichment Strategy for Significantly Improving Sensitivity of Multiplex PCR Analysis of Pathogenic Listeria Species

Listeria monocytogenes and Listeria ivanovii are important pathogenic Listeria spp. that cause infections in humans and animals. Establishing a rapid and sensitive method for the simultaneous screening of pathogenic Listeria spp. is of great significance for ensuring food safety. Multiplex polymerase chain reaction (mPCR) has been extensively reported to simultaneously detect several pathogens in food with high sensitivity, but a time-consuming pre-enrichment process is necessary. In this study, we report the usage of surface-modified polyethyleneimine-coated positively charged magnetic nanoparticles (PEI-MNPs) for rapid enrichment of pathogenic Listeria spp. through electrostatic interactions. The enrichment process takes only 10 min with high capture efficiency (more than 70%) at a wide pH range and ionic strength. Combined with mPCR analysis, the PEI-MNPs-mPCR strategy can simultaneously, rapidly, and sensitively detect pathogenic Listeria spp. without a time-consuming pre-concentration process. Under the optimal conditions, the detection limits of L. monocytogenes and L. ivanovii in lettuce were both as low as 101 CFU/mL, which was a hundred times lower than that without magnetic enrichment. In conclusion, the magnetic enrichment strategy based on charge interaction combined with mPCR analysis has great application potential in shortening the pre-concentration time of foodborne pathogens and improving the detection sensitivity.

Minimum Inhibitory Concentration (MIC) and Minimum Bactericidal Concentration (MBC) for Twelve Antimicrobials (Biocides and Antibiotics) in Eight Strains of Listeria monocytogenes

When selecting effective doses of antimicrobials, be they biocides or antibiotics, it is essential to know the minimum inhibitory concentrations (MICs) and minimum bactericidal concentrations (MBCs) of these substances. The present research determined the MICs and MBCs for three biocides, sodium hypochlorite (SH), benzalkonium chloride (BC), and peracetic acid (PAA), and nine antibiotics in eight strains of Listeria monocytogenes of varying serotypes. Marked intra-species differences were observed in the resistance of L. monocytogenes to the biocides and antibiotics. The MICs (ppm) for the biocides ranged between 1750 and 4500 for SH, 0.25 and 20.00 for BC, and 1050 and 1700 for PAA. Their MBCs (ppm) ranged from 2250 to 4500 for SH, 0.50 to 20.00 for BC, and 1150 to 1800 for PAA. The MICs (ppm) for antibiotics lay between 1 and 15 for ampicillin, 8 and 150 for cephalothin, 20 and 170 for cefoxitin, 0.05 and 0.20 for erythromycin, 4 and 50 for chloramphenicol, 3 and 100 for gentamicin, 2 and 15 for tetracycline, 2 and 80 for vancomycin, and 160 and 430 for fosfomycin. The corresponding MBCs (ppm) were from 5 to 20 for ampicillin, 9 to 160 for cephalothin, 70 to 200 for cefoxitin, 4 to 5 for erythromycin, 9 to 70 for chloramphenicol, 5 to 100 for gentamicin, 3 to 30 for tetracycline, 3 to 90 for vancomycin, and 160 to 450 for fosfomycin. Notably, erythromycin showed considerable efficacy, demonstrated by the low values for both MIC and MBC. Based on EUCAST and the CLSI criteria, all strains were susceptible to erythromycin. All strains were resistant to cephalothin, cefoxitin, gentamicin, and fosfomycin. Further values for resistance were 87.50% for ampicillin and vancomycin, 75.00% for tetracycline, and 62.50% for chloramphenicol. The high prevalence of antibiotic resistance is a matter for concern. A positive correlation was found between MIC and MBC values for most of the biocides and antibiotics. The higher the hydrophobicity of the cell surface, the higher the susceptibility to biocides, suggesting that surface characteristics of bacterial cells influence resistance to these compounds.

Modification of physico-chemical surface properties and growth of Staphylococcus aureus under hyperglycemia and ketoacidosis conditions

Diabetes is a widely spread disease affecting the quality of life of millions of people around the world and is associated to a higher risk of developing infections in different parts of the body. The reasons why diabetes enhances infection episodes are not entirely clear; in this study our aim was to explore the changes that one of the most frequently pathogenic bacteria undergoes when exposed to hyperglycemia and ketoacidosis conditions. Physical surface properties such as hydrophobicity and surface electrical charge are related to bacterial growth behavior and the ability of Staphylococcus aureus to form biofilms. The addition of glucose made bacteria more negatively charged and with moderate-intermediate hydrophobicity. Ketone bodies increased hydrophobicity to approximately 75% and pathological concentrations hindered some of the bacterial surface charge by decreasing the negative zeta potential of cells. When both components were present, the bacterial physical surface changes were more similar to those observed in ketone bodies, suggesting a preferential adsorption of ketone bodies over glucose because of the more favorable solubility of glucose in water. Glucose diabetic concentrations gave the highest number of bacteria in the stationary phase of growth and provoked an increase in the biofilm slime index of around 400% in relation to the control state. Also, this situation is related with an increase of bacterial coverage. The combination of a high concentration of glucose and ketone bodies, which corresponds to a poorly controlled diabetic situation, appears associated with an early infection phase; increased hydrophobic attractive force and reduced electrostatic repulsion between cells results in better packing of cells within the biofilm and more efficient retention to the host surface. Knowledge of bacterial response in high amount of glucose and ketoacidosis environments can serve as a basis for designing strategies to prevent bacterial adhesion, biofilm formation and, consequently, the development of infections.

Antibiotic Resistance and Biofilm-Forming Ability in Enterococcal Isolates from Red Meat and Poultry Preparations

This study investigated the resistance to antibiotics and the capacity to form a biofilm of 200 isolates of enterococci isolated from raw preparations of beef (51 strains), pork (47), chicken (50), and turkey (52) acquired in north-western Spain. Fifteen antimicrobials of clinical importance were tested by the disc diffusion method. The average number of resistances per strain was 4.48 ± 1.59. If resistant strains were taken together with those showing reduced susceptibility, the total number of resistances per strain was 6.97 ± 2.02. Two isolates (1.0% of strains) were resistant to a single antibiotic, twenty-two isolates (11.0%) presented resistance to two, one strain (0.5%) was resistant to three, and 175 isolates (87.5%) showed a multiple drug-resistant phenotype (MDR; defined as no susceptibility to at least one agent from each of three or more antimicrobial categories). The prevalence of resistance varied between 0.5% (gentamicin) and 100% (kanamycin). All strains produced biofilm on polystyrene microwell plates, determined using crystal violet assay. Isolates were classified as having a weak (51 strains; average optical density at 580 nanometers -OD₅₈₀- = 0.206 ± 0.033), moderate (78 strains; average OD₅₈₀ = 0.374 ± 0.068), or strong (71 strains; average OD₅₈₀ = 1.167 ± 0.621) ability to produce biofilm (p < 0.05). Isolates from beef preparations produced the most substantial (p < 0.05) biofilms. The results of this study indicate that meat and poultry preparations are major reservoirs of antibiotic-resistant enterococcal strains capable of forming a biofilm. In order for food-borne infections to be prevented, the importance of careful handling of these foodstuffs during preparation, avoiding cross-contamination, and ensuring thorough cooking, is stressed.

Biovolume and spatial distribution of foodborne Gram-negative and Gram-positive pathogenic bacteria in mono- and dual-species biofilms

The objective of this study was to characterize the biofilms formed by Salmonella enterica serotype Agona, Listeria monocytogenes, methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococcus faecium (VRE) after 12, 48, 72, 120 and 240 h of incubation at 10 °C. Biofilms containing a single species, together with dual-species biofilms in which S. enterica and a Gram-positive bacterium existed in combination, were formed on polystyrene and evaluated by using confocal laser scanning microscopy (CLSM). All strains were able to form biofilm. The greatest biovolume in the observation field of 14,161 μm² was observed for mono-species biofilms after 72 h, where biovolumes of 94,409.0 μm³ ± 2131.0 μm³ (S. enterica), 58,418.3 μm³ ± 5944.9 μm³ (L. monocytogenes), 68,020.8 μm³ ± 5812.3 μm³ (MRSA) and 59,280.0 μm³ ± 4032.9 μm³ (VRE) were obtained. In comparison with single-species biofilms, the biovolume of S. enterica was higher in the presence of MRSA or VRE after 48, 72 and 120 h. In dual-species biofilms, the bacteria showed a double-layer distribution pattern, with S. enterica in the top layer and Gram-positive bacteria in the bottom layer. This spatial disposition should be taken into account when effective strategies to eliminate biofilms are being developed.

The Effectiveness of Nafion-Coated Stainless Steel Surfaces for Inhibiting Bacillus Subtilis Biofilm Formation

Stainless steel is one of most commonly used materials in the world; however, biofilms on the surfaces of stainless steel cause many serious problems. In order to find effective methods of reducing bacterial adhesion to stainless steel, and to investigate the role of electrostatic effects during the formation of biofilms, this study used a stainless steel surface that was negatively charged by being coated with Nafion which was terminated by sulfonic groups. The results showed that the roughness of stainless steel discs coated with 1% Nafion was similar to an uncoated surface; however the hydrophobicity increased, and the Nafion-coated surface reduced the adhesion of Bacillus subtilis by 75% compared with uncoated surfaces. Therefore, a facile way to acquire antibacterial stainless steel was found, and it is proved that electrostatic effects have a significant influence on the formation of biofilms.