Recent Advances in Urban Ventilation Assessment and Flow Modelling

The impact of dynamic traffic and wind conditions on green infrastructure performance to improve local air quality

Road traffic represents the dominant source of air pollution in urban street canyons. Local wind conditions greatly impacts the dispersion of these pollutants, yet street trees complicate ventilation in such settings. This case study adopts a novel modelling framework to account for dynamic traffic and wind conditions to identify the optimal street tree configuration that prevents a deterioration in air quality. Measurement data from a shallow to moderately deep street canyon (average 0.5 H/W aspect ratio and four lanes of 1-way traffic) in Dublin, Ireland was used for model calibration. The computational fluid dynamics (CFD) models were used to examine scenarios of dynamic traffic flows within each traffic lane with respect to its impact on local PM2.5 concentrations on adjacent footpaths, segmenting air quality monitoring results based on different wind conditions for model calibration. The monitoring campaign identified higher PM2.5 concentrations on the leeward (north) footpath, with average differences of 14.1 % (2.15 μg/m3) for early evening peaks. The modelling results demonstrated how street trees negatively impacted air quality on the windward footpath in parallel wind conditions regardless of leaf area density (LAD) or tree spacing, with mixed results observed on the leeward footpath in varying traffic flows and wind speeds. Perpendicular wind direction models and high wind speed exacerbated poor air quality on the windward footpath for all tree spacing models, while improving the air quality on the leeward footpath. The findings advise against planting high-LAD trees in this type of street, with a minimum of 20 m spacing for low-LAD trees to balance reducing local air pollution and ventilation capacity in the street. This study highlights the complexities of those in key decision-marking roles and demonstrates the need to adopt a transparent framework to ensure adequate modelling evidence can inform tree planting in city streets.

Influencing Factors on Airflow and Pollutant Dispersion around Buildings under the Combined Effect of Wind and Buoyancy-A Review

With the rapid growth of populations worldwide, air quality has become an increasingly important issue related to the health and safety of city inhabitants. There are quite a few factors that contribute to urban air pollution; the majority of studies examining the issue are concerned with environmental conditions, building geometries, source characteristics and other factors and have used a variety of approaches, from theoretical modelling to experimental measurements and numerical simulations. Among the environmental conditions, solar-radiation-induced buoyancy plays an important role in realistic conditions. The thermal conditions of the ground and building façades directly affect the wind field and pollutant dispersion patterns in the microclimate. The coupling effect of wind and buoyancy on the urban environment are currently hot and attractive research topics. Extensive studies have been devoted to this field, some focused on the street canyon scale, and have found that thermal effects do not significantly affect the main airflow structure in the interior of the street canyon but strongly affect the wind velocity and pollutant concentration at the pedestrian level. Others revealed that the pollutant dispersion routes can be obviously different under various Richardson numbers at the scale of the isolated building. The purpose of this review is therefore to systematically articulate the approaches and research outcomes under the combined effect of wind and buoyancy from the street canyon scale to an isolated building, which should provide some insights into future modelling directions in environmental studies.

Urban ventilation corridors and spatiotemporal divergence patterns of urban heat island intensity: a local climate zone perspective

Urban ventilation corridors introduce fresh air into urban interiors and improve urban livability, while mitigating the urban heat island (UHI) effect. However, few studies have assessed the impact of urban ventilation corridors on UHI intensity (UHII) from the perspective of the local climates of different cities. Therefore, this study integrated multisource data to construct ventilation corridors from the perspective of local climate zone (LCZ) and analyzed its impact on UHII. The results showed the following: (1) the average UHII of constructed LCZs was higher than that of natural LCZs, among which the building type LCZ10 (heavy industry) had the highest intensity (5.77 °C); (2) in extracted ventilation corridors, the pixel number of natural LCZs was substantially larger than that of constructed LCZs, among which LCZE (bare soil/paved) was the largest; and (3) for natural LCZs, the average UHII of each LCZ was lower within the ventilated corridors than within the non-ventilated corridors (except for LCZG [water]), with the UHII of LCZB (scattered trees) exhibiting the greatest mitigation effect. Quantitative research on the composition and function of ventilation corridors can not only assess the ability of ventilation corridors to mitigate UHIs, but also provide a reference for urban ventilation corridor planning.

Estimates of population exposure to atmospheric pollution and health-related externalities in a real city: The impact of spatial resolution on the accuracy of results

Health impacts of atmospheric pollution is an important issue in urban environments. Its magnitude depends on population exposure which have been frequently estimated by considering different approaches relating pollutant concentration and population exposed to it. However, the uncertainties due to the spatial resolution of the model used to estimate the pollutant concentration or due to the lack of representativeness of urban air quality monitoring station (AQMS) have not been evaluated in detail. In this context, NO₂ annual average concentration at pedestrian level in the whole city of Pamplona (Spain) modelled at high spatial resolution (~1 m) by Computational Fluid Dynamic (CFD) simulations is used to estimate the total population exposure and health-related externalities by using different approaches. Air pollutant concentration and population are aggregated at different spatial resolutions ranging from a horizontal grid cell size of 100 m × 100 m to a coarser resolution where the whole city is covered by only one cell (6 km × 5 km). In addition, concentrations at AQMS locations are also extracted to assess the representativeness of those AQMS. The case with a spatial resolution of 100 m × 100 m for both pollutant-concentration distribution and population data is used as a reference (Base case) and compared with those obtained with the other approaches. This study indicates that the spatial resolution of concentration and population distribution in the city should be 1 km × 1 km or finer to obtain appropriate estimates of total population exposure (underestimations <13%) and health-related externalities (underestimations <37%). For the cases with coarser resolutions, a strong underestimation of total population exposure (>31%) and health-related externalities (>76%) was found. On the other hand, the use of AQMS concentrations can induce important errors due to the limited spatial representativeness, in particular in terms of population exposure.

How can vegetation protect us from air pollution? A critical review on green spaces' mitigation abilities for air-borne particles from a public health perspective - with implications for urban planning

Air pollution causes the largest death toll among environmental risks globally, but interventions to purify ambient air remain inadequate. Vegetation and green spaces have shown reductive effects on air-borne pollutants concentrations, especially of particulate matter (PM). Guidance on green space utilisation for air quality control remains scarce, however, as does its application in practise. To strengthen the foundation for research and interventions, we undertook a critical review of the state of science from a public health perspective. We used inter-disciplinary search strategies for published reviews on green spaces and air pollution in key scientific databases. Using the PRISMA checklist, we systematically identified reviews with quantitative analyses. For each of the presented PM mitigation mechanisms, we conducted additional searches focused on the most recent articles published between 2016 and early 2021. The included reviews differentiate three mitigation mechanisms of green spaces for PM: deposition, dispersion and modification. The most studied mechanism is deposition, particularly measures of mass and settling velocity of PM on plant leaves. We consolidate how green space setups differ by scale and context in their potentials to reduce peak exposures, stationary (point) or mobile (line) pollution sources, and the potentially most harmful PM components. The assessed findings suggest diverse optimisation options for green space interventions, particularly concerning plant selection, spatial setup, ventilation and maintenance - all alongside the consideration of supplementary vegetation effects like on temperature or water. Green spaces' reductive effects on air-borne PM concentrations are considerable, multi-mechanistic and varied by scale, context and vegetation characteristics. Such effect-modifying factors must be considered when rethinking public space design, as accelerated by the COVID-19 pandemic. Weak linkages amid involved disciplines motivate the development of a research framework to strengthen health-oriented guidance. We conclude on an urgent need for an integrated and risk-based approach to PM mitigation through green space interventions.

Effective Range and Driving Factors of the Urban Ventilation Corridor Effect on Urban Thermal Comfort at Unified Scale with Multisource Data

Urban ventilation corridors serve as channels of fresh air flow between the city and suburbs, helping to improve the wind and thermal environments and thermal comfort. However, owing to the limited number of weather stations, it is impossible to quantitatively reveal the effective effect range of urban ventilation corridors on urban thermal comfort at the scale of 100 × 100 m, which is optimal for urban ventilation corridors. In this study, we integrated building data, the European Centre for Medium-Range weather forecast data (ECMWF), MOD13Q1, and other multisource data to analyse the effect of urban ventilation corridors on urban thermal comfort at a unified scale of 100 × 100 m. The results showed that ECMWF and Landsat8 data could be used as substitute factors to improve the universal thermal climate index (UTCI) urban spatial resolution. The effective range of urban ventilation corridor effects on the urban surface temperature and urban comfort was ≤1000 m, with building density and vegetation coverage as the main factors limiting this range. Therefore, attention should be paid to the effective range of urban ventilation corridors, the surrounding building density, vegetation coverage, and the rational use of urban ventilation corridors to reduce the energy consumption of air conditioning in summer.

Study of Realistic Urban Boundary Layer Turbulence with High-Resolution Large-Eddy Simulation

This study examines the statistical predictability of local wind conditions in a real urban environment under realistic atmospheric boundary layer conditions by means of Large-Eddy Simulation (LES). The computational domain features a highly detailed description of a densely built coastal downtown area, which includes vegetation. A multi-scale nested LES modelling approach is utilized to achieve a setup where a fully developed boundary layer flow, which is also allowed to form and evolve very large-scale turbulent motions, becomes incident with the urban surface. Under these nonideal conditions, the local scale predictability and result sensitivity to central modelling choices are scrutinized via comparative techniques. Joint time–frequency analysis with wavelets is exploited to aid targeted filtering of the problematic large-scale motions, while concepts of information entropy and divergence are exploited to perform a deep probing comparison of local urban canopy turbulence signals. The study demonstrates the utility of wavelet analysis and information theory in urban turbulence research while emphasizing the importance of grid resolution when local scale predictability, particularly close to the pedestrian level, is sought. In densely built urban environments, the level of detail of vegetation drag modelling description is deemed most significant in the immediate vicinity of the trees.

On the Impact of Trees on Ventilation in a Real Street in Pamplona, Spain

This paper is devoted to the quantification of changes in ventilation of a real neighborhood located in Pamplona, Spain, due to the presence of street trees Pollutant dispersion in this urban zone was previously studied by means of computational fluid dynamic (CFD) simulations. In the present work, that research is extended to analyze the ventilation in the whole neighborhood and in a tree-free street. Several scenarios are investigated including new trees in the tree-free street, and different leaf area density (LAD) in the whole neighborhood. Changes between the scenarios are evaluated through changes in average concentration, wind speed, flow rates and total pollutant fluxes. Additionally, wind flow patterns and the vertical profiles of flow properties (e.g., wind velocity, turbulent kinetic energy) and concentration, horizontally-averaged over one particular street, are analyzed. The approach-flow direction is almost perpendicular to the street under study (prevailing wind direction is only deviated 4º from the perpendicular direction). For these conditions, as LAD increases, average concentration in the whole neighborhood increases due to the decrease of wind speed. On the other hand, the inclusion of trees in the street produces an increase of averaged pollutant concentration only within this street, in particular for the scenario with the highest LAD value. In fact, the new trees in the street analyzed with the highest LAD value notably change the ventilation producing an increase of total pollutant fluxes inward the street. Additionally, pollutant dispersion within the street is also influenced by the reduction of the wind velocity along the street axis and the decrease of turbulent kinetic energy within the vegetation canopy caused by the new trees. Therefore, the inclusion of new trees in a tree-free street should be done by considering ventilation changes and traffic emissions should be consequently controlled in order to keep pollutant concentration within healthy levels.

A Numerical Study on the Correlation between Sky View Factor and Summer Microclimate of Local Climate Zones

In the context of urbanization, research on urban microclimate and thermal comfort has become one of the themes of eco-city design. Sky view factor (SVF), one of the parameters of urban spatial form, combines multiple morphological information, such as plane opening, aspect ratio, and building density and has an important impact on the urban microclimate. However, there is still no clear research conclusion on the correlation between SVF and microclimate. In this paper, nine Local Climate Zone (LCZ) models are used and typical summer meteorological conditions of Nanjing are applied as an attempt to partially fill this gap. The calculated microclimate and thermal comfort indices include air temperature (AT), surface temperature (ST), relative humidity (RH), wind speed (WS), mean radiant temperature (MRT), and predicted mean vote (PMV). Results show that the local effect of urban morphology on thermal comfort can be retrieved from the use of comprehensive parameters such as SVF (which takes into account the building height, layout, and density) whose distribution in the investigated models showed to be correlated with MRT, so did PMV under low wind speed conditions.