A Comparative Study on the Statutory and Technical Regulations for Controlling Indoor Volatile Organic Compounds in Taiwan and Japan

TVOC - Revisited

BACKGROUND

TVOC (total volatile organic compounds) has been used as a sum parameter in indoor air sciences for over 40 years. In the beginning, individual VOC concentrations determined by gas chromatography were simply added together. However, several methods for calculating TVOC have become established over time.

METHODS

To understand the manifold definitions of TVOC, one must trace the history of indoor air sciences and analytical chemistry. Therefore, in this work, the original approaches of TVOC are searched and explained. A detailed description of the measurement methods is followed by a critical evaluation of the various TVOC values and their possible applications. The aim is to give the reader a deeper understanding of TVOC in order to use this parameter correctly and to be able to better assess published results. In addition, related sum values such as TSVOC and TVVOC are also addressed.

RESULTS

A milestone was the analytical definition of VOCs and TVOC in 1997. A list of VOCs that should at least be considered when calculating TVOC was also provided. This list represented the status at that time, is no longer up-to-date and is being updated by a European working group as part of a harmonization process. However, there is still confusion about the exact definition and reasonable application of TVOC. The signals of other sum parameters, measured with photoacoustics, flame ionization, photoionization or electrochemical sensors, are also often given under the term TVOC.

CONCLUSIONS

It was recognized early that TVOC is not a toxicologically based parameter and is therefore only suitable for a limited number of screening purposes. Consequently, TVOC cannot be used in connection with health-related and odor-related issues. Nevertheless, such references are repeatedly made, which has led to controversial scientific discussions and even court decisions in Germany about the correct and improper use of TVOC.

An efficient tool for the continuous monitoring on adsorption of sub-ppm level gaseous benzene using an automated analytical system based on thermal desorption-gas chromatography/mass spectrometry approach

It became an important task to effectively adsorb volatile organic compounds (VOCs) at or near real-world levels for efficient control of airborne pollution in ambient environments. Nonetheless, most studies carried out previously for the control of VOCs are confined to significantly polluted conditions (e.g., >100 ppm) that are far different from real-world or ambient conditions. To help acquire the meaningful data for the adsorptive removal of VOCs at near real-world levels, a new approach was designed and implemented to measure adsorption of gaseous benzene (as a representative or model VOC) at trace-level quantities (as low as 0.14 ng (0.43 ppb) for a 100 mL sample) using activated carbon (sieved to 212 μm mesh size) as a model sorbent. With the aid of a thermal desorption-gas chromatography/mass spectrometry system, the key adsorption performance metrics (such as 10% breakthrough volume (10% BTV) points: 10% as the key reference) were determined: 1018 L atm g^-1 at 0.1 ppm benzene with the corresponding partition coefficient of 3.85 mol kg^-1 Pa^-1. If the adsorption capacity values (at 10% BTV) are compared across the varying concentration levels of benzene, the maximum value of 1.07 mg g^-1 was observed at 1 ppm benzene (within the concentration range selected in this work). As such, it was possible to quantitatively assess the sorbate-sorbent interactions at significantly low concentrations of VOCs that actually prevail under the near real-world conditions.

The retrograde adsorption phenomenon at the onset of breakthrough and its quantitation: An experimental case study for gaseous toluene on activated carbon surface

The adsorption dynamics of common solid sorbents against various pollutant species are yet poorly understood with respect to the retrograde phenomenon in which the relationship between breakthrough vs. pulled volume is characterized by an early unusual trend (initial increase followed by a decrease to a minimum) and by a normal trend of finally increasing to 100% (or equilibrium). If such trend is expressed in terms of the partition coefficient (PC), a reversed trend of adsorption processes becomes more evident. Retrograde has been previously observed in the initial breakthrough (<10%) isotherms in continuous flow gas-phase adsorption processes. However, retrograde has been neglected/overlooked and not discussed at all in the main stream literature even when it is explicitly observed from isotherm datasets. To properly describe the various aspects of such process, a stop-flow technique was developed to measure the adsorption isotherm of a model volatile organic compound (i.e., toluene in this study) onto a commercial low-cost sorbent (activated carbon: AC). Accordingly, a 10% breakthrough volume of 762 L atm g^-1 (corresponding adsorption capacity of 142 mg g^-1) was determined (at an inlet stream 5 Pa of toluene in 1 atm of N₂ and 5 mg of AC). This automated method was effective to generate a detailed breakthrough profile at high stream-flow rates (or high space velocities) to specifically detect the retrograde phenomenon at the breakthrough onset. This study offers a practical approach towards establishing an in-depth monitoring protocol for the rare retrograde phenomenon.