Predicting the Effect of Localized ACL Damage on Neighbor Ligament Mechanics via Finite Element Modeling

Model Properties and Clinical Application in the Finite Element Analysis of Knee Joint: A Review

The knee is the most complex joint in the human body, including bony structures like the femur, tibia, fibula, and patella, and soft tissues like menisci, ligaments, muscles, and tendons. Complex anatomical structures of the knee joint make it difficult to conduct precise biomechanical research and explore the mechanism of movement and injury. The finite element model (FEM), as an important engineering analysis technique, has been widely used in many fields of bioengineering research. The FEM has advantages in the biomechanical analysis of objects with complex structures. Researchers can use this technology to construct a human knee joint model and perform biomechanical analysis on it. At the same time, finite element analysis can effectively evaluate variables such as stress, strain, displacement, and rotation, helping to predict injury mechanisms and optimize surgical techniques, which make up for the shortcomings of traditional biomechanics experimental research. However, few papers introduce what material properties should be selected for each anatomic structure of knee FEM to meet different research purposes. Based on previous finite element studies of the knee joint, this paper summarizes various modeling strategies and applications, serving as a reference for constructing knee joint models and research design.

Towards a validated musculoskeletal knee model to estimate tibiofemoral kinematics and ligament strains: comparison of different anterolateral augmentation procedures combined with isolated ACL reconstructions

BACKGROUND

Isolated ACL reconstructions (ACLR) demonstrate limitations in restoring native knee kinematics. This study investigates the knee mechanics of ACLR plus various anterolateral augmentations using a patient-specific musculoskeletal knee model.

MATERIALS AND METHODS

A patient-specific knee model was developed in OpenSim using contact surfaces and ligament details derived from MRI and CT data. The contact geometry and ligament parameters were varied until the predicted knee angles for intact and ACL-sectioned models were validated against cadaveric test data for that same specimen. Musculoskeletal models of the ACLR combined with various anterolateral augmentations were then simulated. Knee angles were compared between these reconstruction models to determine which technique best matched the intact kinematics. Also, ligament strains calculated by the validated knee model were compared to those of the OpenSim model driven by experimental data. The accuracy of the results was assessed by calculating the normalised RMS error (NRMSE); an NRMSE < 30% was considered acceptable.

RESULTS

All rotations and translations predicted by the knee model were acceptable when compared to the cadaveric data (NRMSE < 30%), except for the anterior/posterior translation (NRMSE > 60%). Similar errors were observed between ACL strain results (NRMSE > 60%). Other ligament comparisons were acceptable. All ACLR plus anterolateral augmentation models restored kinematics toward the intact state, with ACLR plus anterolateral ligament reconstruction (ACLR + ALLR) achieving the best match and the greatest strain reduction in ACL, PCL, MCL, and DMCL.

CONCLUSION

The intact and ACL-sectioned models were validated against cadaveric experimental results for all rotations. It is acknowledged that the validation criteria are very lenient; further refinement is required for improved validation. The results indicate that anterolateral augmentation moves the kinematics closer to the intact knee state; combined ACLR and ALLR provide the best outcome for this specimen.

Revision Anterior Cruciate Ligament, Lateral Collateral Ligament Reconstruction, and Osteochondral Allograft Transplantation for Complex Knee Instability

Anterior cruciate ligament (ACL) injuries rarely occur as an isolated event and often include associated meniscal, subchondral bone, and collateral ligament injuries. Concomitant pathology frequently complicates primary and revision ACL reconstruction and must be addressed to ensure comprehensive diagnosis and treatment. In this Technical Note, we describe our method for treatment of complex knee instability following multiple failed ACL reconstruction using a multiligament reconstruction technique with an osteochondral allograft transplantation to the lateral femoral condyle. This comprehensive repair technique restores the anatomic load bearing forces of the cruciate and collateral ligaments and promotes biological repair through incorporation of cartilage resurfacing to ultimately achieve optimal kinematics of the knee joint.

Optimization of Spinal Reconstructions for Thoracolumbar Burst Fractures to Prevent Proximal Junctional Complications: A Finite Element Study

The management strategies of thoracolumbar (TL) burst fractures include posterior, anterior, and combined approaches. However, the rigid constructs pose a risk of proximal junctional failure. In this study, we aim to systemically evaluate the biomechanical performance of different TL reconstruction constructs using finite element analysis. Furthermore, we investigate the motion and the stress on the proximal junctional level adjacent to the constructs. We used a T10-L3 finite element model and simulated L1 burst fracture. Reconstruction with posterior instrumentation (PI) alone (U2L2 and U1L1+(intermediate screw) and three-column spinal reconstruction (TCSR) constructs (U1L1+PMMA and U1L1+Cage) were compared. Long-segment PI resulted in greater global motion reduction compared to constructs with short-segment PI. TCSR constructs provided better stabilization in L1 compared to PI alone. Decreased intradiscal and intravertebral pressure in the proximal level were observed in U1L1+IS, U1L1+PMMA, and U1L1+Cage compared to U2L2. The stress and strain energy of the pedicle screws decreased when anterior reconstruction was performed in addition to PI. We showed that TCSR with anterior reconstruction and SSPI provided sufficient immobilization while offering additional advantages in the preservation of physiological motion, the decreased burden on the proximal junctional level, and lower risk of implant failure.

A Computational Investigation of Microstructural Damage of the Acl Under High Loading of the Knee Joint

The anterior cruciate ligament plays a major role in maintaining the stability of the knee joint, is susceptible to injury under strenuous activity. ACL injuries can lead to joint instability and complications such as osteoarthritis. Despite this, there is a lack of material models capable of predicting damage at a localized fiber level, hindering our ability to understand how damage develops in real-time. The present work develops a continuum-damage material model of the ACL and applies the model to a finite element simulation of the knee undergoing high quadriceps tendon loading. Using quadriceps tendon loadings of 1000, 1500, and 2000 N, the development of microstructural damage within the ACL tissue was examined, and the effects of localized damage on the joint kinematics were investigated. Damage tended to develop in the mid-substance of the ACL in the present model in the anterior medial bundle region and could induce significant changes in the joint kinematics. Using this model, new insights into the development of ACL injury mechanisms can be investigated.