Structural Changes and Mechanical Resistance of Claws and Denticles in Coconut Crabs of Different Sizes

Mechanical Resistance of the Largest Denticle on the Movable Claw of the Mud Crab

Decapod crustaceans have tooth-like white denticles that are present only on the pinching side of the claws. In the mud crab, Scylla serrata, a huge denticle exists on the movable finger of the dominant claw. This is mainly used to crush the shells of the crab's staple food. The local mechanical properties, hardness (HIT) and elastic modulus (Er), of the peak and valley areas of the largest denticle were examined via a nanoindentation test. The microstructure and elemental composition were characterized using a scanning electron microscope and energy-dispersive X-ray spectroscopy. The striation patterns originating from a twisted plywood structure parallel to the surface were visible over the entire denticle. Most of the largest denticle was occupied by a hard area without phosphorus, and there was a soft layer corresponding to the endocuticle with phosphorus in the innermost part. The HIT of the denticle valley was about 40% lower than that of the denticle peak, and the thickness of the soft endocuticle of the denticle valley was five times thicker than that of the denticle peak. The HIT-Er map showed that the abrasion resistance of the denticle surface was vastly superior and was in the top class among organisms. The claw denticles were designed with the necessary characteristics in the necessary places, as related to the ecology of the mud crab.

Mechanical Resistance and Tissue Structure of Claw Denticles of Various Sizes in the Mud Crab, Scylla serrata

Decapod crustaceans have tooth-like denticles on their claw fingers, which come into direct contact with predators and prey. Since the denticles are subject to more frequent and intense stress than other parts of the exoskeleton, they must be especially resistant to wear and abrasion. We clarified the mechanical resistance and tissue structure of the denticles arranged in a line on the fixed finger of the mud crab, which has huge claws. The denticles of the mud crab are small at the fingertip and become larger closer to the palm. The denticles have a twisted-plywood-pattern structure stacked parallel to the surface regardless of size, but the abrasion resistance strongly depends on the size of the denticles. Due to the dense tissue structure and calcification, the abrasion resistance increases as the denticle size increases, reaching its maximum at the denticle surface. The denticles of the mud crab have a tissue structure that prevents them from breaking when pinched. The high abrasion resistance of the large denticle surface is an essential feature for the frequent crushing of shellfish, which is the mud crab's staple food. The characteristics and tissue structure of the claw denticles on the mud crab may provide ideas for developing stronger, tougher materials.

Columnar Structure of Claw Denticles in the Coconut Crab, Birgus latro

Some decapod crustaceans have tooth-like white denticles that exist only on the pinching side of claws. We revealed the denticle microstructure in the coconut crab, Birgus latro, using optical and scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and a focused ion beam (FIB)-SEM. Three-dimensional analysis and fracture surface observation were performed in order to clarify the microstructural differences in two mineralized layers—the exocuticle and the endocuticle. The denticles consist of a columnar structure normal to the surface and are covered with a very thin epicuticle and an exocuticle with a twisted plywood pattern structure. Due to abrasion, the exocuticle layer was lost in the wide area above the large denticles; conversely, these layers remained on the surface of the relatively small denticles and on the base of the denticle. The results showed that the mineralized exoskeleton of the crab’s claw is classified into three structures: a twisted plywood pattern structure stacked parallel to the surface for the exocuticle, a porous structure with many regularly arranged pores vertical to the surface for the endocuticle, and a columnar structure vertical to the surface for the denticle.