Paper-Based Working Electrodes Coated with Mercury or Bismuth Films for Heavy Metals Determination

Reviewing neonicotinoid detection with electroanalytical methods

Neonicotinoids, as the fastest-growing class of insecticides, currently account for over 25% of the global pesticide market. Their effectiveness in controlling a wide range of pests that pose a threat to croplands, home yards/gardens, and golf course greens cannot be denied. However, the extensive use of neonicotinoids has resulted in significant declines in nontarget organisms such as pollinators, insects, and birds. Furthermore, the potential chronic, sublethal effects of these compounds on human health remain largely unknown. To address these pressing issues, it is crucial to explore and understand the capabilities of electrochemical sensors in detecting neonicotinoid residues. Surprisingly, despite the increasing importance of this topic, no comprehensive review article currently exists in the literature. Therefore, our proposed review aims to bridge this gap by providing a thorough analysis of the use of electrochemical methods for neonicotinoid determination. In this review article, we will delve into various aspects of electrochemical analysis, including the influence of electrode materials, employed techniques, and the different types of electrode mechanisms utilized. By synthesizing and analysing the existing research in this field, our review will offer valuable insights and guidance to researchers, scientists, and policymakers alike.

Laser-induced graphene electrochemical sensor for quantitative detection of phytotoxic aluminum ions (Al3+) in soils extracts

Aluminum in its Al3+ form is a metal that inhibits plant growth, especially in acidic soils (pH < 5.5). Rapid and accurate quantitative detection of Al3+ in agricultural soils is critical for the timely implementation of remediation strategies. However, detecting metal ions requires time-consuming preparation of samples, using expensive instrumentation and non-portable spectroscopic techniques. As an alternative, electrochemical sensors offer a cost-effective and minimally invasive approach for in situ quantification of metal ions. Here, we developed and validated an electrochemical sensor based on bismuth-modified laser-induced graphene (LIG) electrodes for Al3+ quantitative detection in a range relevant to agriculture (1-300 ppm). Our results show a linear Al3+ detection range of 1.07-300 ppm with a variation coefficient of 5.3%, even in the presence of other metal ions (Pb2+, Cd2+, and Cu2+). The sensor offers a limit of detection (LOD) of 0.34 ppm and a limit of quantification (LOQ) of 1.07 ppm. We compared its accuracy for soil samples with pH < 4.8 to within 89-98% of spectroscopic methods (ICP-OES) and potentiometric titration. This technology's portability, easy to use, and cost-effectiveness make it a promising candidate for in situ quantification and remediation of Al3+ in agricultural soils and other complex matrices.

Label free electrochemical sensors for Pb(II) detection based on hemicellulose extracted from Opuntia Ficus Indica cactus

We aim to develop an electrochemical sensor for a divalent metal ion (lead II), a highly toxic water contaminant. We explore a sensor formed with a hemicellulose polysaccharide extracted from the Opuntia Ficus Indica cactus associated with agarose as a sensitive layer deposited on a gold electrode. This sensor combines the functional groups of hemicellulose that could form a complex with metal ions and agarose with gelling properties to form a stable membrane. The sensor demonstrated a loading ability of Pb2+, with higher affinity compared to other metal ions such as Hg2+, Ni2+, and Cu2+, thanks to the chemical structure of hemicellulose. The detection was measured by square wave voltammetry based on a well-defined redox peak of the metal ions. The sensor shows high sensitivity towards Pb2+ with a detection limit of 1.3 fM. The application in river and sea water using the standard addition method for lead detection was studied.

Recent advances in the modification of electrodes for trace metal analysis: a review

This review paper summarizes the research published in the last five years on using different compounds and/or materials as modifiers for electrodes employed in trace heavy metal analysis. The main groups of modifiers are identified, and their single or combined application on the surface of the electrodes is discussed. Nanomaterials, film-forming substances, and polymers are among the most used compounds employed mainly in the modification of glassy carbon, screen-printed, and carbon paste electrodes. Composites composed of several compounds and/or materials have also found growing interest in the development of modified electrodes. Environmentally friendly substances and natural products (mainly biopolymers and plant extracts) have continued to be included in the modification of electrodes for trace heavy metal analysis. The main analytical performance parameters of the modified electrodes as well as possible interferences affecting the determination of the target analytes, are discussed. Finally, a critical evaluation of the main findings from these studies and an outlook discussing possible improvements in this area of research are presented.

Sensitive and Selective Electrochemical Detection of Lead(II) Based on Waste-Biomass-Derived Carbon Quantum Dots@Zeolitic Imidazolate Framework-8

An electrochemical sensor based on carbon quantum dots (CQDs) and zeolitic imidazolate framework-8 (ZIF-8) composite was fabricated to detect lead(II). The CQDs (2.47 ± 0.52 nm) were synthesized from platanus acerifoli leaves by carbonization and the hydrothermal method. Under the optimal conditions, the fabricated electrochemical sensor had excellent performance in detecting Pb²⁺. The linear range for Pb²⁺ was 1 nM-1 μM, and the limit of detection (LOD) was 0.04 nM and the limit of quantification (LOQ) was 0.14 nM. Moreover, when the solution contained Pb²⁺ and Cd²⁺, the linear range for Pb²⁺ was 50 nM to 1 μM and the LOD was 0.02 nM. When the solution contained Pb²⁺ and Cu²⁺, the linear range for Pb²⁺ was 50 nM-750 nM and LOD was 0.07 nM. Furthermore, even if the solution contained Pb²⁺, Cd²⁺ and Cu²⁺, the linear range for Pb²⁺ was 50 nM-1 μM and the LOD was 0.04 nM. The X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectrometer (FTIR) and Brunauer-Emmet-Teller (BET) results indicated that the composite electrode materials had abundant oxygen-containing functional groups, a large specific surface area and pore structure, which are conducive to the adsorption of heavy metal ions and improve the detection performance.

Detection Techniques for Lead Ions in Water: A Review

Lead pollution has increasingly become the focus of environmental pollution, which is a great harm to the ecological environment and human health. Strict control of the emission of lead pollutants and accurate monitoring of lead are very important. The lead ion detection technologies are introduced here, including spectrophotometry, electrochemical method, atomic absorption spectrometry, and other detection methods, and the methods' applicability, the advantages, and disadvantages are discussed. The detection limits of voltammetry and atomic absorption spectrometry are as low as 0.1 μg/L, and those of atomic absorption spectrometry are as low as 2 μg/L. The detection limit of photometry is higher (0.01 mg/L), but this method can be achieved in most laboratories. The application of different extraction pretreatment technologies in lead ion detection is introduced. The new technologies develop at home and abroad, such as precious metal nanogold technology, paper microfluidic technology, fluorescence molecular probe technology, spectroscopy, and other emerging technologies in recent years, are reviewed, and the principle and application of various technologies are expounded.

A Paper-Based Electrochemical Sensor Based on PtNP/COFTFPB-DHzDS@rGO for Sensitive Detection of Furazolidone

Herein, a paper-based electrochemical sensor based on PtNP/COF_TFPB-DHzDS@rGO was developed for the sensitive detection of furazolidone. A cluster-like covalent organic framework (COF_TFPB-DHzDS) was successfully grown on the surface of amino-functional reduced graphene oxide (rGO-NH₂) to avoid serious self-aggregation, which was further loaded with platinum nanoparticles (PtNPs) with high catalytic activity as nanozyme to obtain PtNP/COF_TFPB-DHzDS@rGO nanocomposites. The morphology of PtNP/COF_TFPB-DHzDS@rGO nanocomposites was characterized, and the results showed that the smooth rGO surface became extremely rough after the modification of COF_TFPB-DHzDS. Meanwhile, ultra-small PtNPs with sizes of around 1 nm were precisely anchored on COF_TFPB-DHzDS to maintain their excellent catalytic activity. The conventional electrodes were used to detect furazolidone and showed a detection limit as low as 5 nM and a linear range from 15 nM to 110 μM. In contrast, the detection limit for the paper-based electrode was 0.23 μM, and the linear range was 0.69-110 μM. The results showed that the paper-based electrode can be used to detect furazolidone. This sensor is a potential candidate for the detection of furazolidone residue in human serum and fish samples.

Plot-on-demand integrated paper-based sensors for drop-volume voltammetric monitoring of Pb(II) and Cd(II) using a bismuth nanoparticle-modified electrode

The fabrication of fully ink-drawn fluidic electrochemical paper-based analytical devices (ePADs) is reported for the determination of trace Pb(II) and Cd(II) by differential pulse anodic stripping voltammetry (DPASV). The fluidic pattern was formed on the paper substrate using an inexpensive computer-controlled x-y plotter and a commercial hydrophobic marker pen. Then, electrodes were deposited on the devices using a second x-y plotting step with a commercial technical pen filled with a graphite-based conductive ink prepared in house. The fabrication parameters of the ePADs were studied by cyclic voltammetry using the ferro/ferri couple as a probe and by scanning electron microscopy. The ePADs, featuring a bismuth nanoparticle-modified working electrode, were applied to the determination of Pb(II) and Cd(II) by DPASV. The chemical and instrumental conditions were studied. The limits of detection were 3.1 μg L^-1 for Cd(II) and 4.5 μg L^-1 for Pb(II) whereas the between-device reproducibility (expressed as the % relative standard deviation of the response at 6 different ePADs) was < 14%. Each ePAD requires 120 s to fabricate and costs less than 0.15 € in terms of consumables. The ePADs are suitable for the on-site determination of Pb(II) and Cd(II) in environmental and food samples.

Single-Use Fluidic Electrochemical Paper-Based Analytical Devices Fabricated by Pen Plotting and Screen-Printing for On-Site Rapid Voltammetric Monitoring of Pb(II) and Cd(II)

This work reports the fabrication of integrated electrochemical fluidic paper-based analytical devices (ePADs) using a marker pen drawing and screen-printing. Electrodes were deposited on paper using screen-printing with conductive carbon ink. Then, the desired fluidic patterns were formed on the paper substrate by drawing with a commercial hydrophobic marker pen using an inexpensive computer-controlled x-y plotter. The working electrode was characterized by cyclic voltammetry and scanning electron microscopy. The analytical utility of the electrochemical PADs is demonstrated through electrochemical determination of Pb(II) and Cd(II) by anodic stripping voltammetry. For this purpose, the sample was mixed with a buffer solution and a Bi(III) solution, applied to the test zone of the PAD, the metals were preconcentrated as a bismuth alloy on the electrode surface and oxidized by applying an anodic potential scan. The proposed manufacturing approach enables the large-scale fabrication of fit-for-purpose disposable PADs at low cost which can be used for rapid on-site environmental monitoring.

Recent Advancement in Disposable Electrode Modified with Nanomaterials for Electrochemical Heavy Metal Sensors

Heavy metal pollution has gained global attention due to its high toxicity and non-biodegradability, even at a low level of exposure. Therefore, the development of a disposable electrode that is sensitive, simple, portable, rapid, and cost-effective as the sensor platform in electrochemical heavy metal detection is vital. Disposable electrodes have been modified with nanomaterials so that excellent electrochemical properties can be obtained. This review highlights the recent progress in the development of numerous types of disposable electrodes modified with nanomaterials for electrochemical heavy metal detection. The disposable electrodes made from carbon-based, glass-based, and paper-based electrodes are reviewed. In particular, the analytical performance, fabrication technique, and integration design of disposable electrodes modified with metal (such as gold, tin and bismuth), carbon (such as carbon nanotube and graphene), and metal oxide (such as iron oxide and zinc oxide) nanomaterials are summarized. In addition, the role of the nanomaterials in improving the electrochemical performance of the modified disposable electrodes is discussed. Finally, the current challenges and future prospect of the disposable electrode modified with nanomaterials are summarized.

Bismuth Film-Coated Gold Ultramicroelectrode Array for Simultaneous Quantification of Pb(II) and Cd(II) by Square Wave Anodic Stripping Voltammetry

The widespread presence of heavy metals in drinking water sources arises as a major health concern, particularly in developing countries. The development of low-cost and reliable detection techniques is identified as a societal need to provide affordable water quality control. Herein, a bismuth film-coated gold ultramicroelectrode array (BF-UMEA) was used for the detection of Pb(II) and Cd(II) in water samples via square wave anodic stripping voltammetry (SWASV). Experimental parameters such as deposition time, Bi(III) concentration, acetate buffer concentration, pH, square wave frequency, amplitude, and step potential were all varied to determine their effects on the current peak intensities of the target metal ions. Ten-fold excess in the concentration of interferences was found to cause a decrease in the stripping peak areas of Cd(II) and Pb(II) in the following order of magnitude: benzene < NaCl < Ni(II) < Cu(II). Using Box-Behnken design, the optimum SWASV parameters that provided maximum current peak areas were 14.76 Hz (frequency), 50.10 mV (amplitude), and 8.76 mV (step potential). The limits of detection of the as-prepared BF-UMEA were 5 and 7 µg L^-1 for Pb(II) and Cd(II), respectively. These results demonstrate the potential use of a BF-UMEA in SWASV for the trace quantification of Pb(II) and Cd(II) in water samples.

Paper-Based Screen-Printed Electrodes: A New Generation of Low-Cost Electroanalytical Platforms

Screen-printed technology has helped considerably to the development of portable electrochemical sensors since it provides miniaturized but robust and user-friendly electrodes. Moreover, this technology allows to obtain very versatile transducers, not only regarding their design, but also their ease of modification. Therefore, in the last decades, the use of screen-printed electrodes (SPEs) has exponentially increased, with ceramic as the main substrate. However, with the growing interest in the use of cheap and widely available materials as the basis of analytical devices, paper or other low-cost flat materials have become common substrates for SPEs. Thus, in this revision, a comprehensive overview on paper-based SPEs used for analytical proposes is provided. A great variety of designs is reported, together with several examples to illustrate the main applications.

The Use of Factorial Design and Simplex Optimization to Improve Analytical Performance of In Situ Film Electrodes

This work presents a systematic approach to determining the significance of the individual factors affecting the analytical performance of in-situ film electrode (FE) for the determination of Zn(II), Cd(II), and Pb(II). Analytical parameters were considered simultaneously, where the lowest limit of quantification, the widest linear concentration range, and the highest sensitivity, accuracy, and precision of the method evidenced a better analytical method. Significance was evaluated by means of a fractional factorial (experimental) design using five factors, i.e., the mass concentrations of Bi(III), Sn(II), and Sb(III), to design the in situ FE, the accumulation potential, and the accumulation time. Next, a simplex optimization procedure was employed to determine the optimum conditions for these factors. Such optimization of the in situ FE showed significant improvement in analytical performance compared to the in situ FEs in the initial experiments and compared to pure in situ FEs (bismuth-film, tin-film, and antimony-film electrodes). Moreover, using the optimized in situ FE electrode, a possible interference effect was checked for different species and the applicability of the electrode was demonstrated for a real tap water sample.