Erlotinib Promotes Ligand-Induced EGFR Degradation in 3D but Not 2D Cultures of Pancreatic Ductal Adenocarcinoma Cells

Antagonism of epidermal growth factor receptor signaling favors hepatitis E virus life cycle

Hepatitis E virus (HEV) poses a global threat, which currently remains understudied in terms of host interactions. Epidermal growth factor receptor (EGFR) plays multifaceted roles in viral pathogenesis, impacting host-cell entry, viral replication, and host-defense modulation. On the one hand, EGFR signaling emerged as a major driver in innate immunity; on the other hand, a crosstalk between HEV and EGFR requires deeper analysis. We therefore aimed to dissect the receptor's involvement in the HEV life cycle. In persistently HEV-infected cells, the EGFR amount is decreased alongside with enhanced receptor internalization. As compared with the control ligand-induced EGFR, activation revealed an early receptor internalization and degradation in HEV-replicating cells, resulting in a notable EGFR signaling delay. Interestingly, inhibition or silencing of EGFR increased viral replication, extracellular and intracellular viral transcripts, and released infectious particles. The pro-viral impact of EGFR inhibition was attributed to (i) impaired expression of interferon-stimulated genes, (ii) activation of the autophagosomal system, (iii) virus-induced inhibition of lysosomal acidification, and (iv) a decrease of the cellular cholesterol level.

IMPORTANCE

This study identifies epidermal growth factor receptor (EGFR) as a novel host factor affecting hepatitis E virus (HEV): EGFR downregulation promotes viral replication, release, and evasion from the innate immune response. The discovery that EGFR inhibition favors viral spread is particularly concerning for HEV patients undergoing EGFR inhibitor treatment.

Sitravatinib is a potential EGFR inhibitor and induce a new death phenotype in Glioblastoma

Glioblastoma (GBM) is a highly lethal neurological tumor that presents significant challenge for clinicians due to its heterogeneity and high mortality rate. Despite extensive research, there is currently no effective drug treatment available for GBM. Research evidence has consistently demonstrated that the epidermal growth factor receptor (EGFR) promotes tumor progression and is associated with poor prognosis in several types of cancer. In glioma, EGFR abnormal amplification is reported in approximately 40% of GBM patients, with overexpression observed in 60% of cases, and deletion or mutation in 24% to 67% of patients. In our study, Sitravatinib, a potential EGFR inhibitor, was identified through molecular docking screening based on protein structure. The targeting of EGFR and the tumor inhibitory effect of Sitravatinib on glioma were verified through cellular and in vivo experiments, respectively. Our study also revealed that Sitravatinib effectively inhibited GBM invasive and induced DNA damage and cellular senescence. Furthermore, we observed a novel cell death phenotype induced by Sitravatinib, which differed from previously reported programmed death patterns such as apoptosis, pyroptosis, ferroptosis, and necrosis.

[Progress on three-dimensional cell culture technology and their application]

Three-dimensional (3D) cell culture model is a system that co-culture carriers with 3D structural materials and different types of cells in vitro to simulate the microenvironment in vivo. This novel cell culture model has been proved to be close to the natural system in vivo. In the process of cell attachment, migration, mitosis and apoptosis, it could produce biological reactions different from that of monolayer cell culture. Therefore, it can be used as an ideal model to evaluate the dynamic pharmacological effects of active substances and the metastasis process of cancer cells. This paper compared and analyzed the different characteristics of cell growth and development under two-dimensional (2D) and 3D model culture and introduced the establishment method of 3D cell model. The application progress of 3D cell culture technology in tumor model and intestinal absorption model was summarized. Finally, the application prospect of 3D cell model in the evaluation and screening of active substance was revealed. This review is expected to provide reference for the development and application of new 3D cell culture models.

Biomaterial-Assisted 3D In Vitro Tumor Models: From Organoid towards Cancer Tissue Engineering Approaches

Cancers are a leading cause of death around the world, accounting for nearly 10 million deaths yearly [...].

Synthesis of Palladium-Catalysed C-C Bond Forming 5-Chloro Quinolines via Suzuki-Miyaura Coupling; Anti-Pancreatic Cancer Screening on PANC-1 Cell Lines

Pancreatic cancer is the most severe among other cancers due to its late detection and less chance of survivability. Heterocycles are proven ring systems in the treatment of various cancers and this is due to the presence of two biodynamic molecules combined, which have a greater synergistic efficacy in many anticancer drugs. Quinoline and pyridine ring systems are brought together to obtain greater potency and this is achieved by coupling both using Pd-catalyst, and in the present investigation, Suzuki-Miyaura coupling (SMC) reactions are adopted to generate potent molecular entities. Pancreatic cancer is difficult to treat due to overexpression of the VEGFR2 protein. VEGFR2 is targeted to design the molecules of quinoline-coupled pyridine moieties and is docked to evaluate the protein-ligand interaction at the binding site. The binding affinity of conjugates revealed the potency and capability of ligands to inhibit the VEGFR2 pathway. The in-silico ADMET properties determined their inherent pharmacokinetic feasibility. The synthesized conjugates have been evaluated by MTT assay against the human pancreatic cancer cell lines (PANC-1). Among the series, compounds 5d, 5e, and 5h exhibited a greater inhibitory activity against the cell lines with an IC₅₀ value of 82.32±1.38, 54.74±1.18 and 80.35±1.68 μM. In the present exploration, 5e exhibited greater inhibitory activity and it could be a promising lead for the development of new chemotherapeutics against pancreatic cancer.

Increased Stiffness Downregulates Focal Adhesion Kinase Expression in Pancreatic Cancer Cells Cultured in 3D Self-Assembling Peptide Scaffolds

The focal adhesion kinase (FAK) is a non-receptor tyrosine kinase that participates in integrin-mediated signal transduction and contributes to different biological processes, such as cell migration, survival, proliferation and angiogenesis. Moreover, FAK can be activated by autophosphorylation at position Y397 and trigger different signaling pathways in response to increased extracellular matrix stiffness. In addition, FAK is overexpressed and/or hyperactivated in many epithelial cancers, and its expression correlates with tumor malignancy and invasion potential. One of the characteristics of solid tumors is an over deposition of ECM components, which generates a stiff microenvironment that promotes, among other features, sustained cell proliferation and survival. Researchers are, therefore, increasingly developing cell culture models to mimic the increased stiffness associated with these kinds of tumors. In the present work, we have developed a new 3D in vitro model to study the effect of matrix stiffness in pancreatic ductal adenocarcinoma (PDAC) cells as this kind of tumor is characterized by a desmoplastic stroma and an increased stiffness compared to its normal counterpart. For that, we have used a synthetic self-assembling peptide nanofiber matrix, RAD16-I, which does not suffer a significant degradation in vitro, thus allowing to maintain the same local stiffness along culture time. We show that increased matrix stiffness in synthetic 3D RAD16-I gels, but not in collagen type I scaffolds, promotes FAK downregulation at a protein level in all the cell lines analyzed. Moreover, even though it has classically been described that stiff 3D matrices promote an increase in pFAK^Y397/FAK proteins, we found that this ratio in soft and stiff RAD16-I gels is cell-type-dependent. This study highlights how cell response to increased matrix stiffness greatly depends on the nature of the matrix used for 3D culture.

An Osteosarcoma Model by 3D Printed Polyurethane Scaffold and In Vitro Generated Bone Extracellular Matrix

Simple Summary

Development of new therapeutics to treat osteosarcoma is fundamental to decreasing its current health impact. 3D in vitro models are gaining tremendous momentum as, compared to traditional 2D in vitro models and in vivo models, can speed up new treatment discovery and provide clarification of the pathology development, by ultimately offering a reproducible and biomimetic tool. However, engineering a 3D osteosarcoma in vitro model is challenging, since the reliability of the models strictly depends on their ability to correctly mimic the physical, mechanical, and biological properties of the pathological tissue to be replicated. Here, we designed 3D printed polyurethane scaffolds enriched by in vitro pre-generated bone extracellular matrix, synthesized by osteo-differentiated human mesenchymal stromal cells, to replicate in vitro an osteosarcoma model, which can be potentially used to study tumor progression and to assess new treatments.

Abstract

Osteosarcoma is a primary bone tumor characterized by a dismal prognosis, especially in the case of recurrent disease or metastases. Therefore, tools to understand in-depth osteosarcoma progression and ultimately develop new therapeutics are urgently required. 3D in vitro models can provide an optimal option, as they are highly reproducible, yet sufficiently complex, thus reliable alternatives to 2D in vitro and in vivo models. Here, we describe 3D in vitro osteosarcoma models prepared by printing polyurethane (PU) by fused deposition modeling, further enriched with human mesenchymal stromal cell (hMSC)-secreted biomolecules. We printed scaffolds with different morphologies by changing their design (i.e., the distance between printed filaments and printed patterns) to obtain different pore geometry, size, and distribution. The printed PU scaffolds were stable during in vitro cultures, showed adequate porosity (55–67%) and tunable mechanical properties (Young’s modulus ranging in 0.5–4.0 MPa), and resulted in cytocompatible. We developed the in vitro model by seeding SAOS-2 cells on the optimal PU scaffold (i.e., 0.7 mm inter-filament distance, 60° pattern), by testing different pre-conditioning factors: none, undifferentiated hMSC-secreted, and osteo-differentiated hMSC-secreted extracellular matrix (ECM), which were obtained by cell lysis before SAOS-2 seeding. Scaffolds pre-cultured with osteo-differentiated hMSCs, subsequently lysed, and seeded with SAOS-2 cells showed optimal colonization, thus disclosing a suitable biomimetic microenvironment for osteosarcoma cells, which can be useful both in tumor biology study and, possibly, treatment.

β-Sheet to Random Coil Transition in Self-Assembling Peptide Scaffolds Promotes Proteolytic Degradation

One of the most desirable properties that biomaterials designed for tissue engineering or drug delivery applications should fulfill is biodegradation and resorption without toxicity. Therefore, there is an increasing interest in the development of biomaterials able to be enzymatically degraded once implanted at the injury site or once delivered to the target organ. In this paper, we demonstrate the protease sensitivity of self-assembling amphiphilic peptides, in particular, RAD16-I (AcN-RADARADARADARADA-CONH2), which contains four potential cleavage sites for trypsin. We detected that when subjected to thermal denaturation, the peptide secondary structure suffers a transition from β-sheet to random coil. We also used Matrix-Assisted Laser Desorption/Ionization-Time-Of-Flight (MALDI-TOF) to detect the proteolytic breakdown products of samples subjected to incubation with trypsin as well as atomic force microscopy (AFM) to visualize the effect of the degradation on the nanofiber scaffold. Interestingly, thermally treated samples had a higher extent of degradation than non-denatured samples, suggesting that the transition from β-sheet to random coil leaves the cleavage sites accessible and susceptible to protease degradation. These results indicate that the self-assembling peptide can be reduced to short peptide sequences and, subsequently, degraded to single amino acids, constituting a group of naturally biodegradable materials optimal for their application in tissue engineering and regenerative medicine.