Metal-Free Enhanced Photocatalytic Activation of Dioxygen by g-C3N4 Doped with Abundant Oxygen-Containing Functional Groups for Selective N-Deethylation of Rhodamine B

Exploring the Remarkably High Photocatalytic Efficiency of Ultra-Thin Porous Graphitic Carbon Nitride Nanosheets

Graphitic carbon nitride (g-C3N4) is a metal-free photocatalyst used for visible-driven hydrogen production, CO2 reduction, and organic pollutant degradation. In addition to the most attractive feature of visible photoactivity, its other benefits include thermal and photochemical stability, cost-effectiveness, and simple and easy-scale-up synthesis. However, its performance is still limited due to its low absorption at longer wavelengths in the visible range, and high charge recombination. In addition, the exfoliated nanosheets easily aggregate, causing the reduction in specific surface area, and thus its photoactivity. Herein, we propose the use of ultra-thin porous g-C3N4 nanosheets to overcome these limitations and improve its photocatalytic performance. Through the optimization of a novel multi-step synthetic protocol, based on an initial thermal treatment, the use of nitric acid (HNO3), and an ultrasonication step, we were able to obtain very thin and well-tuned material that yielded exceptional photodegradation performance of methyl orange (MO) under visible light irradiation, without the need for any co-catalyst. About 96% of MO was degraded in as short as 30 min, achieving a normalized apparent reaction rate constant (k) of 1.1 × 10-2 min-1mg-1. This represents the highest k value ever reported using C3N4-based photocatalysts for MO degradation, based on our thorough literature search. Ultrasonication in acid not only prevents agglomeration of g-C3N4 nanosheets but also tunes pore size distribution and plays a key role in this achievement. We also studied their performance in a photocatalytic hydrogen evolution reaction (HER), achieving a production of 1842 µmol h-1 g-1. Through a profound analysis of all the samples' structure, morphology, and optical properties, we provide physical insight into the improved performance of our optimized porous g-C3N4 sample for both photocatalytic reactions. This research may serve as a guide for improving the photocatalytic activity of porous two-dimensional (2D) semiconductors under visible light irradiation.

Preparation of Oxygen-Doping Nongraphitic Carbon Nitride via Efficiency Exfoliation for the Application of Photocatalytic Degradation

E-OLCN photocatalyst was synthesized by oxygen doping of low molecular weight carbon nitride (LCN) with ethanol solvent stripping. The enhanced light absorption, fast electron transport rate, and photogenerated carrier separation efficiency of E-OLCN leads to the excellent photocatalytic degradation performance compared with the original materials. The synergistic effect of oxygen doping and ethanol solvent stripping plays a significant role for the modulation of electronic and structural properties of the prepared catalysts. Methyl orange (MO) and rhodamine B (RhB) are chosen as typical pollutants for the application of photocatalytic degradation. The E-OLCN sample exhibits outstanding photocatalytic degradation performance, where the rate constant k (1 × 10-2 min-1) of E-OLCN (1.68) is 2.9 times than that of O-LCN (0.58) and 8.8 times than that of pristine LCN (0.19) for MO. Moreover, modulated E-OLCN shows good stability after cycling experiments and the activity still achieved 90%. The detailed mechanism for MO degradation was proposed with the technical support of liquid chromatography-mass spectrometry (LC-MS) and electron spin resonance (EPR). The superoxide radical (·O2-) is the main active species and the MO molecule could be decomposition completely.

Heterogeneous Activation of Peroxymonosulfate by a Spinel CoAl2O4 Catalyst for the Degradation of Organic Pollutants

Bimetallic catalysts have significantly contributed to the chemical community, especially in environmental science. In this work, a CoAl2O4 spinel bimetal oxide was synthesized by a facile co-precipitation method and used for the degradation of organic pollutants through peroxymonosulfate (PMS) activation. Compared with Co3O4, the as-prepared CoAl2O4 possesses a higher specific surface area and a larger pore volume, which contributes to its becoming increasingly conducive to the degradation of organic pollutants. Under optimal conditions (calcination temperature: 500 °C, catalyst: 0.1 g/L, and PMS: 0.1 g/L), the as-prepared CoAl2O4 catalyst could degrade over 99% of rhodamine B (RhB) at a degradation rate of 0.048 min−1, which is 2.18 times faster than Co3O4 (0.022 min−1). The presence of Cl− could enhance RhB degradation in the CoAl2O4/PMS system, while HCO3− and CO32− inhibit RhB degradation. Furthermore, the considerable reusability and universality of CoAl2O4 were testified. Through quenching tests, 1O2 and SO4•− were identified as the primary reactive species in RhB degradation. The toxicity evaluation verified that the degraded solution exhibited lower biological toxicity than the initial RhB solution. This study provides new prospects in the design of cost-effective and stable cobalt-based catalysts and promotes the application of PMS-based advanced oxidation processes for refractory wastewater treatment.

Facile assembly and excellent elimination behavior of porous BiOBr-g-C3N4 heterojunctions for organic pollutants

Photocatalysis can be an effective technique for eliminating organic contaminants from water. In this study, BiOBr flower-spheres coupled with porous graphite carbon nitride (g-C₃N₄) were synthesized by controlling the dosage of cetyltrimethylammonium bromide (CTAB). Various characterization techniques were then applied to elucidate the structure-performance relationships of the resulting heterojunction photocatalysts in degrading organic dyes. Experimental results established an optimal molar ratio for KBr to CTAB of 5:1. Benefiting from a remarkable porous structure and tight coupling between porous g-C₃N₄ and BiOBr, the optimal BiOBr-g-C₃N₄(2%) exhibited enhanced visible light absorption capability and promoted the separation of photoinduced carriers. Total removal efficiency for rhodamine B (RhB, 25.0 mL, 20.0 mg L^-1) reached 87% within 30 min in the presence of BiOBr-g-C₃N₄(2%) (20.0 mg) (i.e., 1.51 μmol (g_{photocatalyst} min)^-1), which is superior to the performance of BiOBr (72%) (i.e., 1.25 μmol (g_{photocatalyst} min)^-1), g-C₃N₄ (21%) (i.e., 0.37 μmol (g_{photocatalyst} min)^-1). Furthermore, the photocatalytic reaction rate constant over the optimal heterojunction was 0.034 min^-1, which is significantly larger than those of porous g-C3N4 (0.003 min^-1) and BiOBr (0.015 min^-1). Moreover, this type II heterojunction showed good universality for other organic dyes (such as methyl violet, methylene blue, and crystal violet), highlighting a promising potential role in the elimination of environmental pollutants.

Changes in levels of N-nitrosamine formed from amine-containing compounds during chloramination via photocatalytic pretreatment with immobilized TiO2: Effect of source water and pH

We investigated the effectiveness of photocatalytic pretreatment (PCP) of precursors in minimizing the formation potentials (FPs) of carcinogenic nitrosamines, including N-nitrosodimethylamine (NDMA), N-nitrosodiethylamine (NDEA), and N-nitrosodiethanolamine (NDELA), during water chloramination. A steel mesh substrate with immobilized TiO₂ was highly efficient at mitigating nitrosamine formation and removing targeted precursors such as ranitidine, nizatidine, trimebutine, triethanolamine, and metoclopramide. Compared to UVC/H₂O₂, PCP under UVA irradiation (intensity of 0.67 mW cm^-2) was more effective for reducing nitrosamine-FPs during post-chloramination. However, the PCP efficacies varied with the water source, pretreatment pH, and irradiation time. For example, PCP of eutrophic water increased the NDMA-FPs, but produced notable reductions (up to 99%) for NDELA- and NDEA-FPs. Shorter irradiation times, up to 15 min, increased the NDELA-FP in triethanolamine, and the NDMA-FP in nizatidine and trimebutine. However, the nitrosamine-FP decreased by > 50% after PCP at a pH > 5.6, following irradiation for 120 min. Oxygen addition, N-de(m)ethylation, and N-dealkylation were responsible for decreasing nitrosamine-FPs via the destruction of key moieties; this has been elucidated by mass spectroscopy. This study suggests that PCP could be used as an alternative strategy for minimizing nitrosamine-FPs during water treatment.

Green synthesis of lignin nanorods/g-C3N4 nanocomposite materials for efficient photocatalytic degradation of triclosan in environmental water

Triclosan (TCS) is a common anti-microbial ingredient in pharmaceutical and personal care products. The usage of TCS was banned by the United States Food and Drug Administration (in 2016) due to its potential health risks. However, TCS has been frequently detected in the aquatic environment. Therefore, it is vital to design low-cost and highly efficient photocatalysts to enhance TCS's photocatalytic degradation in wastewater treatment to eliminate its toxicity to environmental health. In this study, we developed a highly efficient catalyst by incorporating lignin nanorods (LNRs) into graphitic carbon nitride (GCN) nanomaterials as green LNRs/GCN-based nanocomposite photocatalysts for the effective degradation of TCS in waters. LNRs/GCN nanosheets (NSs) and LNRs/GCN-NRs based nanocomposite materials were prepared using a simple wet-impregnation method. The surface morphology and optical properties of as-synthesized materials were well-characterized using FE-SEM, XRD, XPS, and UV-DRS. The photocatalyst (LNRs/GCN-NRs) material showed maximum TCS degradation efficiency of 99.9% and a high rate constant of 0.0661 min^-1 under pH-10 with crucial reactive spices (OH and O₂^-), and excellent cycling performance (over five cycles) within 90 min of UV-light illumination. LNRs/GCN-NRs nanocomposite indicated enhanced photocatalytic performances for TCS degradation due to its strong synergistic effect between LNRs and GCN-NRs as bifunctional catalyst substrate morphology with efficient bandgap energy and accessible active sites compared to LNRs/GCN-NSs. Therefore, LNRs/GCN-NRs nanocomposite was observed to be a highly-active, low-cost, stable, eco-friendly, and efficient photocatalyst for complete degradation of TCS under UV-light irradiation.

Doping of Graphitic Carbon Nitride with Non-Metal Elements and Its Applications in Photocatalysis

This review outlines the latest research into the design of graphitic carbon nitride (g-C3N4) with non-metal elements. The emphasis is put on modulation of composition and morphology of g-C3N4 doped with oxygen, sulfur, phosphor, nitrogen, carbon as well as nitrogen and carbon vacancies. Typically, the various methods of non-metal elements introducing in g-C3N4 have been explored to simultaneously tune the textural and electronic properties of g-C3N4 for improving its response to the entire visible light range, facilitating a charge separation, and prolonging a charge carrier lifetime. The application fields of such doped graphitic carbon nitride are summarized into three categories: CO2 reduction, H2-evolution, and organic contaminants degradation. This review shows some main directions and affords to design the g-C3N4 doping with non-metal elements for real photocatalytic applications.

Construction of ZnTiO3/Bi4NbO8Cl heterojunction with enhanced photocatalytic performance

Constructing heterojunction is an effective strategy to enhance photocatalytic performance of photocatalysts. Herein, we fabricated ZnTiO₃/Bi₄NbO₈Cl heterojunction with improved performance via a typical mechanical mixing method. The rhodamine (RhB) degradation rate over heterojunction is higher than that of individual ZnTiO₃ or Bi₄NbO₈Cl under Xenon-arc lamp irradiation. Combining ZnTiO₃ with Bi₄NbO₈Cl can inhibit the recombination of photo-excited carriers. The improved quantum efficiency was demonstrated by transient-photocurrent responses (PC), electrochemical impedance spectroscopy (EIS), photoluminescence (PL) spectra, and time-resolved PL (TRPL) spectra. This research may be valuable for photocatalysts in the industrial application.