Capping Agent Effect on Pd-Supported Nanoparticles in the Hydrogenation of Furfural

Simultaneously Enhanced Formation of Pyrazines and Furans during Thermal Degradation of the Glycyl-l-glutamine Amadori Compound by Selected Exogenous Amino Acids and Appropriate Elevated Temperatures

The Amadori compound of glucose and glycyl-l-glutamine (Gly-Gln-ARP) was prepared and characterized by UPLC-MS/MS and NMR. Gly-Gln-ARP could be thermally degraded into Gly-Gln and other secondary reaction products like glycyl-l-glutamic acid and its ARP via deamidation. The thermal processing temperature exerted a tremendous influence on the flavor formation of ARP. Furans were mainly formed at 100 °C, while an elevated temperature of 120 °C facilitated the massive accumulation of α-dicarbonyl compounds through the retro-aldolization of deoxyglucosone, and then increased the formation of pyrazines. The extra-added amino acids further promoted the formation of pyrazines at 120 °C, especially Glu, Lys, and His, further increasing the total concentration of pyrazines to 457 ± 6.26, 563 ± 65.5, and 411 ± 59.2 μg/L, respectively, exceeding the pure heated control at 140 °C (296 ± 6.67 μg/L). The total concentration of furans was enhanced to (20.7 × 10³) ± 8.17 μg/L by extra-added Gln. Different increasing effects were observed on the type and flavor intensity of formed pyrazines and furans from different extra-added amino acids.

A Copper Peroxide Fenton Nanoagent-Hydrogel as an In Situ pH-Responsive Wound Dressing for Effectively Trapping and Eliminating Bacteria

Bacterial infection has been a great threat to wounds due to the abuse of antibiotics and drug resistance. Elaborately constructing an efficient antibacterial strategy for accelerated healing of bacteria-infected wounds is of great importance. Herein, we develop a transferrin-conjugated copper peroxide nanoparticle-hydrogel (denoted as CP@Tf-hy) wound dressing with no toxicity to mammalian cells at a test dosage. When exposed to an initial acidic wound environment, the CP@Tf-hy simultaneously displays in situ self-supplied H₂O₂ and pH-responsive release of Fenton catalytic copper ions accompanied by highly toxic hydroxyl radical (•OH) generation against antibiotic-resistant bacteria. Meanwhile, the positively charged CP@Tf-hy can efficiently trap and restrain negatively charged bacteria to the range of •OH destruction to greatly overcome its intrinsic disadvantages of short life and diffusion distance. Importantly, the CP@Tf-hy consumes the bacterial overexpressed antioxidant glutathione while boosting Fenton catalytic copper(I) ions to generate more •OH. The synergistic effects of the enhanced Fenton reaction, responsive copper ion release, and bacterial trapping can achieve high bacterial elimination efficacy (7 log reduction). In vivo investigations demonstrate that the porous CP@Tf-hy significantly promotes hemostasis, cell proliferation, and migration of the wound, consequently accelerating bacteria-infected wound healing. The safe, low-cost, and all-in-one CP@Tf-hy holds great prospects as an antibacterial dressing for rapid resistant bacteria-infected purulent wound healing.

Antimicrobial and antifungal properties of NiCu-PANI/PVA quaternary nanocomposite synthesized by chemical oxidative polymerization of polyaniline

Increasing antimicrobial resistance has led to use of novel technologies such as nanomaterials and nanocomposites that have shown effective antimicrobial and/or antifungal activities against several gram-positive and gram-negative bacteria. There have been limited studies on antimicrobial properties of the combined polymer nanocomposites with transitional bimetallic nanoparticles such as nickel (Ni) and copper (Cu). Thus, the main objective of this study was to synthesis, characterize and investigate the antibacterial and antifungal properties of NiCu-PANI/PVA nanocomposite. The nanocomposite films with different amount of Ni and Cu salts were synthesized by chemical oxidative polymerization of polyaniline using HCl as oxidant and PVA as a stabilizer. Optical, chemical composition, and morphological characteristics as well as thermal stability were evaluated using UV-Visible, FTIR, SEM-EDX, and TGA analyses. Antimicrobial properties were then determined using the disc diffusion assay against gram-negative bacteria (i.e., Escherichia coli ATCC 25922, Klebsiella pneumonia ATCC 700603, Proteus sp.,) and gram-positive bacteria (i.e., Staphylococcus aureus ATCC 2593). Fungal plant pathogens including Aspergillus niger and Fusarium oxysporum f. sp. pisi were also evaluated for determination of antifungal activity of NiCu-PANI/PVA films. Among the synthesized films, Ni₆₅Cu₃₅-PANI/PVA showed excellent antibacterial activity against all the bacteria strains examined in this study. The diameters of inhibition zones for Escherichia coli ATCC 25922, Klebsiella pneumoniae ATCC 700603, Proteus sp., and Staphylococcus aureus ATCC 2593 were 23, 23, 17, and 18 mm, respectively indicating good antibacterial activities. Additionally, NiCu-PANI/PVA, particularly the films with higher Cu intake, showed better antifungal activity against Fusarium oxysporum f. sp. pisi. However, NiCu-PANI/PVA was ineffective against Aspergillus niger.

The Nature of Active Sites in the Pd/C-Catalyzed Hydrogenation/Hydrodeoxygenation of Benzaldehyde

Hydrogenations and hydrodeoxygenations represent two of the most important reactions in the production of both bulk and fine chemicals. Despite the wide and long use of metal-based catalysts for this reaction, there is still some uncertainty with respect to the properties governing the catalyst activity. Using the hydrogenation of benzaldehyde as a model reaction, in this paper, we disclose the dominant parameters determining catalyst activity of Pd nanoparticles supported on a carbonaceous material (carbon nanoplates, GNP). In particular, several operating parameters of the catalyst synthesis were varied in order to obtain materials with differences in such physico-chemical properties as nanoparticle size, Pd oxidation state and Pd surface exposure. A linear correlation between catalyst activity and the amount of surface Pd(0) atoms was found; this dependence, maintained after catalyst recycling, pointed out the nature of the active site of the Pd/GNP catalyst represented by exposed Pd(0) species.

Thiol Functionalised Supports for Controlled Metal Nanoparticle Formation for Improved C-C Coupling

The myriad applications of metal nanoparticle systems have individual demands on their size, shape and electronic states, demanding novel synthetic methods to optimise these properties. Herein we report our method of exploiting strong thiol-Pd binding as a precursor for forming small, uniform Pd nanoparticles on activation. We validate our approach with a range of characterisation techniques and contrast our design strategy with an analogous wetness impregnation method, showing the drastic improvements for catalytic C-C coupling. The presence of the thiol groups offers greater control over nanoparticle formation, particularly temperature resolution on activation, potentially allowing more targeted nanoparticle formation procedures.

Catalytic Transformation of Renewables (Olefin, Bio-Sourced, et al.)

The objective of this Special Issue is to provide new diverse contributions that can demonstrate recent applications in biomass transformation using heterogeneous catalysts [...]

Taming the butterfly effect: modulating catalyst nanostructures for better selectivity control of the catalytic hydrogenation of biomass-derived furan platform chemicals

This minireview highlights versatile routes for catalyst nanostructure modulation for better hydrogenation selectivity control of typical biomass-derived furan platform chemicals to tame the butterfly effect on the catalytic selectivity.

A potent multifunctional Ag/Co-polyvinylpyrrolidone nanocomposite for enhanced detection of Cr(III) from environmental samples and its photocatalytic and antibacterial applications

Trivalent chromium (Cr(III)) is considered to exhibit hormesis (bi-phasic dose-response) property, where low dose be beneficial and high dose shows toxic effect. The present work describe the development of a bimetallic Ag/Co-polyvinylpyrrolidone nanocomposite (Ag/Co-PVP NPs) probe to detect and quantify Cr(III) ions from aqueous samples. The hydrodynamic size and zeta potential of the particle was determined to be 29 ± 1.3 nm and -37.19 ± 2.4 mV respectively. The interaction of Cr(III) with Ag/Co-PVP probe showed drastic change in colour of NPs from dark brown to pale yellow, with corresponding blue shift, tapering width and increased peak intensity. The probe showed high specificity towards Cr(III) among the tested metal ions. A linearity was observed between various dilutions of Cr(III) ions (10 to 50 nM) and the absorbance of Ag/Co-PVP NPs at 428 nm with R² value of 0.998. The minimum detectable limit of Cr(III) was calculated to be 0.6 nM. The influence of salinity, temperature and pH on detection was studied. The probe was found to detect Cr(III) at acidic pH effectively. Competitive metal ions did not interfere the detection of Cr(III). The water sample collected from Noyyal river was taken to estimate Cr(III) by using the prepared probe to ensure practical applicability. The sample contains 9.3 nM of Cr(III) that was cross verified with AAS analysis. Hence, it is understood that the reported probe can be used to detect Cr(III) selectively with high accuracy from aqueous samples. In addition, the particles also exhibited excellent photocatalytic activity under visible light. Ag/Co-PVP nanocomposites exhibited excellent antibacterial activity against both gram +ve (B. subtilis) and gram -ve (E. coli) bacteria.

Anchoring of palladium nanoparticles on N-doped mesoporous carbon

Pd nanoparticles deposited on nitrogen-doped mesoporous carbon are promising catalysts for highly selective and effective catalytic hydrogenation reactions. To design and utilize these novel catalysts, it is essential to understand the effect of N doping on the metal-support interactions. A combined experimental (X-ray photoelectron spectroscopy) and computational (density functional theory) approach is used to identify preferential adsorption sites and to give detailed explanations of the corresponding metal-support interactions. Pyridinic N atoms turned out to be the preferential adsorption sites for Pd nanoparticles on nitrogen-doped mesoporous carbon, interacting through their lone pairs (LPs) with the Pd atoms via N-LP - Pd dσ and N-LP - Pd s and Pd dπ - π* charge transfer, which leads to a change in the Pd oxidation state. Our results evidence the existence of bifunctional palladium nanoparticles containing Pd0 and Pd2+ centers.

Effect of Carbon Support, Capping Agent Amount, and Pd NPs Size for Bio-Adipic Acid Production from Muconic Acid and Sodium Muconate

The effect of support, stabilizing agent, and Pd nanoparticles (NPs) size was studied for sodium muconate and t,t-muconic acid hydrogenation to bio-adipic acid. Three different activated carbons (AC) were used (Norit, KB, and G60) and carbon morphology did not affect the substrate conversion, but it greatly influenced the adipic acid yield. 1% Pd/KB Darco catalyst, which has the highest surface area and Pd surface exposure, and the smallest NPs size displayed the highest activity. Furthermore, the effect of the amount of the protective agent was studied varying metal/protective agent weight ratios in the range of 1/0.00–1/1.20, using KB as the chosen support. For sodium muconate reduction 1% Pd/KB_1.2 catalyst gave the best results in terms of activity (0.73 s⁻¹), conversion, and adipic acid yield (94.8%), while for t,t-muconic acid hydrogenation the best activity result (0.85 s⁻¹) was obtained with 1% Pd/KB_0.0 catalyst. Correlating the results obtained from XPS and TEM analyses with catalytic results, we found that the amount of PVA (polyvinyl alcohol) influences mean Pd NPs size, Pd(0)/Pd(II) ratio, and Pd surface exposure. Pd(0)/Pd(II) ratio and Pd NPs size affected adipic acid yield and activity during sodium muconate hydrogenation, respectively, while adipic acid yield was related by exposed Pd amount during t,t-muconic acid hydrogenation. The synthesized catalysts showed higher activity than commercial 5% Pd/AC.