Ceria-Based Catalysts Studied by Near Ambient Pressure X-ray Photoelectron Spectroscopy: A Review

Thermally stable Pd/CeO2@SiO2 with a core-shell structure for catalytic lean methane combustion

Noble metal catalysts exhibit high catalytic activity in lean CH4 combustion at low temperatures. However, the high surface energy of noble metal nanoparticles makes them susceptible to deactivation due to migratory-aggregation during the catalytic process. Herein, a core-shell structure with a Pd/CeO2 core and a SiO2 shell (denoted as Pd/CeO2@SiO2) was designed and prepared to enhance the thermal stability for catalytic lean CH4 combustion. A series of characterization methods demonstrated the successful encapsulation of SiO2 and the modified thermal stability. The results of activity tests indicated that Pd/CeO2@SiO2 exhibited the optimal catalytic performance. After seven runs, Pd/CeO2@SiO2 achieved 90% conversion of CH4 at 385 °C compared to Pd/CeO2 at 440 °C. The remarkable catalytic performance was attributed to the synergistic effect of strengthened metal-support interactions and the core-shell structure. On the one hand, the migration and aggregation of Pd nanoparticles were limited due to the protection of the SiO2 shell layer. On the other hand, the SiO2 shell layer further enhanced the interactions between the Pd nanoparticles and CeO2, thus promoting the formation of PdxCe1-xO2-δ solid solutions and active oxygen species, which were beneficial for the improvement of the stability and redox capacity of the catalyst.

Unraveling Catalytic Reaction Mechanism by In Situ Near Ambient Pressure X-ray Photoelectron Spectroscopy

Probing surface chemistry during reactions closer to realistic conditions is crucial for the understanding of mechanisms in heterogeneous catalysis. Near ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) is one of the state-of-the-art surface-sensitive techniques used to characterize catalyst surfaces in gas phases. This Perspective begins with a brief overview of the development of the NAP-XPS technique and its representative applications in identifying the active sites at a molecular level. Next, recent in situ NAP-XPS investigations of several model catalysts in the CO₂ hydrogenation reaction are mainly discussed. Finally, we highlight the major challenges facing NAP-XPS and future improvements to facilities for probing intermediates with higher resolutions under real ambient pressure reactions in heterogeneous catalysis.

How Does Immunomodulatory Nanoceria Works? ROS and Immunometabolism

Dysregulation of the immune system is associated with an overproduction of metabolic reactive oxygen species (ROS) and consequent oxidative stress. By buffering excess ROS, cerium oxide (CeO₂) nanoparticles (NPs) (nanoceria) not only protect from oxidative stress consequence of inflammation but also modulate the immune response towards inflammation resolution. Immunomodulation is the modulation (regulatory adjustment) of the immune system. It has natural and human-induced forms, and it is part of immunotherapy, in which immune responses are induced, amplified, attenuated, or prevented according to therapeutic goals. For decades, it has been observed that immune cells transform from relative metabolic quiescence to a highly active metabolic state during activation(1). These changes in metabolism affect fate and function over a broad range of timescales and cell types, always correlated to metabolic changes closely associated with mitochondria number and morphology. The question is how to control the immunochemical potential, thereby regulating the immune response, by administering cellular power supply. In this regard, immune cells show different general catabolic modes relative to their activation status, linked to their specific functions (maintenance, scavenging, defense, resolution, and repair) that can be correlated to different ROS requirements and production. Properly formulated, nanoceria is highly soluble, safe, and potentially biodegradable, and it may overcome current antioxidant substances limitations and thus open a new era for human health management.

Redox-mediated C-C bond scission in alcohols adsorbed on CeO2-xthin films

The decomposition mechanisms of ethanol and ethylene glycol on well-ordered stoichiometric CeO₂(111) and partially reduced CeO_2-x(111) films were investigated by means of synchrotron radiation photoelectron spectroscopy, resonant photoemission spectroscopy, and temperature programmed desorption. Both alcohols partially deprotonate upon adsorption at 150 K and subsequent annealing yielding stable ethoxy and ethylenedioxy species. The C-C bond scission in both ethoxy and ethylenedioxy species on stoichiometric CeO₂(111) involves formation of acetaldehyde-like intermediates and yields CO and CO₂accompanied by desorption of acetaldehyde, H₂O, and H₂. This decomposition pathway leads to the formation of oxygen vacancies. In the presence of oxygen vacancies, C-O bond scission in ethoxy species yields C₂H₄. In contrast, C-C bond scission in ethylenedioxy species on the partially reduced CeO_2-x(111) is favored with respect to C-O bond scission and yields methanol, formaldehyde, and CO accompanied by the desorption of H₂O and H₂. Still, scission of C-O bonds on both sides of the ethylenedioxy species yields minor amounts of accompanying C₂H₄and C₂H₂. C-O bond scission is coupled with a partial recovery of the lattice oxygen in competition with its removal in the form of water.

Photo-oxidative degradation of polyacids derived ceria nanoparticle modulation for chemical mechanical polishing

The effects of photo-oxidative degradation of polyacids at various concentrations and with different durations of ultraviolet (UV) irradiation on the photo-reduction of ceria nanoparticles were investigated. The effect of UV-treated ceria on the performance of chemical mechanical polishing (CMP) for the dielectric layer was also evaluated. When the polyacids were exposed to UV light, they underwent photo-oxidation with consumption of the dissolved oxygen in slurry. UV-treated ceria particles formed oxygen vacancies by absorbing photon energy, resulting in increased Ce³⁺ ions concentration on the surface, and when the oxygen level of the solution was lowered by the photo-oxidation of polymers, the formation of Ce³⁺ ions was promoted from 14.2 to 36.5%. Furthermore, chain scissions of polymers occurred during the oxidation process, and polyacids with lower molecular weights were found to be effective in ceria particle dispersion in terms of the decrease in the mean diameter and size distribution maintaining under 0.1 of polydispersity index. With increasing polyacid concentration and UV irradiation time, the Ce³⁺ concentration and the dispersity of ceria both increased due to the photo-oxidative degradation of the polymer; this enhanced the CMP performance in terms of 87% improved material removal rate and 48% lowered wafer surface roughness.

Spiers Memorial Lecture: Prospects for photoelectron spectroscopy

An overview is presented of recent advances in photoelectron spectroscopy, focussing on advances in in situ and time-resolved measurements, and in extending the sampling depth of the technique. The future...

Toward an Atomic-Level Understanding of Ceria-Based Catalysts: When Experiment and Theory Go Hand in Hand

ConspectusBecause ceria (CeO₂) is a key ingredient in the formulation of many catalysts, its catalytic roles have received a great amount of attention from experiment and theory. Its primary function is to enhance the oxidation activity of catalysts, which is largely governed by the low activation barrier for creating lattice O vacancies. Such an important characteristic of ceria has been exploited in CO oxidation, methane partial oxidation, volatile organic compound oxidation, and the water-gas shift (WGS) reaction and in the context of automotive applications. A great challenge of such heterogeneously catalyzed processes remains the unambiguous identification of active sites.In oxidation reactions, closing the catalytic cycle requires ceria reoxidation by gas-phase oxygen, which includes oxygen adsorption and activation. While the general mechanistic framework of such processes is accepted, only very recently has an atomic-level understanding of oxygen activation on ceria powders been achieved by combined experimental and theoretical studies using in situ multiwavelength Raman spectroscopy and DFT.Recent studies have revealed that the adsorption and activation of gas-phase oxygen on ceria is strongly facet-dependent and involves different superoxide/peroxide species, which can now be unambiguously assigned to ceria surface sites using the combined Raman and DFT approach. Our results demonstrate that, as a result of oxygen dissociation, vacant ceria lattice sites are healed, highlighting the close relationship of surface processes with lattice oxygen dynamics, which is also of technical relevance in the context of oxygen storage-release applications.A recent DFT interpretation of Raman spectra of polycrystalline ceria enables us to take account of all (sub)surface and bulk vibrational features observed in the experimental spectra and has revealed new findings of great relevance for a mechanistic understanding of ceria-based catalysts. These include the identification of surface oxygen (Ce-O) modes and the quantification of subsurface oxygen defects. Combining these theoretical insights with operando Raman experiments now allows the (sub)surface oxygen dynamics of ceria and noble metal/ceria catalysts to be monitored under the reaction conditions.Applying these findings to Au/ceria catalysts provides univocal evidence for ceria support participation in heterogeneous catalysis. For room-temperature CO oxidation, operando Raman monitoring the (sub)surface defect dynamics clearly demonstrates the dependence of catalytic activity on the ceria reduction state. Extending the combined experimental/DFT approach to operando IR spectroscopy allows the elucidation of the nature of the active gold as (pseudo)single Au⁺ sites and enables us to develop a detailed mechanistic picture of the catalytic cycle. Temperature-dependent studies highlight the importance of facet-dependent defect formation energies and adsorbate stabilities (e.g., carbonates). While the latter aspects are also evidenced to play a role in the WGS reaction, the facet-dependent catalytic performance shows a correlation with the extent of gold agglomeration. Our findings are fully consistent with a redox mechanism, thus adding a new perspective to the ongoing discussion of the WGS reaction.As outlined above for ceria-based catalysts, closely combining state-of-the-art in situ/operando spectroscopy and theory constitutes a powerful approach to rational catalyst design by providing essential mechanistic information based on an atomic-level understanding of reactions.

Low-Temperature Methane Partial Oxidation over Pd Supported on CeO2: Effect of the Preparation Method and Precursors

The catalytic production of syngas by the partial oxidation of methane (POM) was investigated over Pd supported on ceria (0.5–2 Pd wt.%) prepared by incipient wetness impregnation and by mechanochemical methods. The performance of the Pd/CeO2 catalyst prepared by milling CeO2 and Pd acetate was superior to that prepared by milling CeO2 and Pd nitrate and to Pd/CeO2 prepared by impregnation from Pd acetate. The best catalytic activity of the Pd/CeO2 catalyst prepared from CeO2 and Pd acetate was obtained by milling at 50 Hz for 5 min. Two-step combustion and reforming reaction mechanism were identified. Remarkably, methane conversion increased progressively with Pd loading for the catalysts prepared by incipient wetness impregnation, whereas low metal loading showed better conversion of methane for the catalysts prepared by ball milling using Pd acetate. This was explained in terms of an impressive dispersion of Pd species with a strong interaction with the surface of ceria, as deduced from transmission electron microscopy, Raman spectroscopy and X-ray photoelectron spectroscopy characterization, which revealed a large quantity of highly oxidized species at the surface.

Influence of Nanoscale Surface Arrangements on the Oxygen Transfer Ability of Ceria–Zirconia Mixed Oxide

Ceria-based materials, and particularly CeO2–ZrO2 (CZ) solid solutions are key ingredient in catalyst formulations for several applications due to the ability of ceria to easily cycling its oxidation state between Ce4+ and Ce3+. Ceria-based catalysts have a great soot oxidation potential and the mechanism deeply relies on the degree of contact between CeO2 and carbon. In this study, carbon soot has been used as solid reductant to better understand the oxygen transfer ability of ceria–zirconia at low temperatures; the effect of different atmosphere and contact conditions has been investigated. The difference in the contact morphology between carbon soot and CZ particles is shown to strongly affect the oxygen transfer ability of ceria; in particular, increasing the carbon–ceria interfacial area, the reactivity of CZ lattice oxygen is significantly improved. In addition, with a higher degree of contact, the soot oxidation is less affected by the presence of NOx. The NO oxidation over CZ in the presence of soot has also been analyzed. The existence of a core/shell structure strongly enhances reactivity of interfacial oxygen species while affecting negatively NO oxidation characteristics. These findings are significant in the understanding of the redox chemistry of substituted ceria and help determining the role of active species in soot oxidation reaction as a function of the degree of contact between ceria and carbon.