Biocatalysis of Industrial Kraft Pulps: Similarities and Differences between Hardwood and Softwood Pulps in Hydrolysis by Enzyme Complex of Penicillium verruculosum

Exploration of the Linkages between Lignin and Carbohydrates in Kraft Pulp from Wheat Straw Using a 13C/2H Isotopic Tracer

To further our understanding of the change in association between lignin and carbohydrates after kraft pulping, isotope-labeled kraft pulp (KP) was prepared using 13C and D double-isotope-labeled wheat straw, and it was subjected to enzymatic hydrolysis and ionic liquid treatment to explore the linkages between lignin and carbohydrate complexes in wheat straw. Isotope abundance determination showed that 13C and D abundances in the experimental groups were substantially higher than those in the control group, indicating that the injected exogenous coniferin-[α-13C], coniferin-[γ-13C], and d-glucose-[6-D2] were effectively absorbed and metabolized during wheat internode growth. Solid-state CP/MAS 13C-NMR spectroscopy showed that lignin was mainly linked to polysaccharides via acetal, benzyl ether, and benzyl ester bonds. Kraft pulp (KP) from the labeled wheat straw was degraded by cellulase. The obtained residue was fractionated using the ionic liquid DMSO/TBAH to separate the cellulose-lignin complex (KP-CLC) and xylan-lignin complex (KP-XLC). X-ray diffractometer determination showed that the KP-CLC regenerated cellulose type II from type I after the ionic liquid conversion. The 13C-NMR spectrum of Ac-En-KP-CLC showed that the cellulose-lignin complex structure was chemically bonded between the lignin and cellulose through acetal and benzyl ether bonds. The 13C-NMR spectrum of En-KP-XLC showed a lignin-hemicellulose complex structure, wherein lignin and xylan were chemically bonded by benzyl ether and acetal bonds. These results indicate that the cross-linking between lignin and carbohydrates exists in lignocellulosic fibers even after kraft pulping.

Efficient Secretory Production of Lytic Polysaccharide Monooxygenase BaLPMO10 and Its Application in Plant Biomass Conversion

Lytic polysaccharide monooxygenases (LPMOs) can oxidatively break the glycosidic bonds of crystalline cellulose, providing more actionable sites for cellulase to facilitate the conversion of cellulose to cello-oligosaccharides, cellobiose and glucose. In this work, a bioinformatics analysis of BaLPMO10 revealed that it is a hydrophobic, stable and secreted protein. By optimizing the fermentation conditions, the highest protein secretion level was found at a IPTG concentration of 0.5 mM and 20 h of fermentation at 37 °C, with a yield of 20 mg/L and purity > 95%. The effect of metal ions on the enzyme activity of BaLPMO10 was measured, and it was found that 10 mM Ca²⁺ and Na⁺ increased the enzyme activity by 47.8% and 98.0%, respectively. However, DTT, EDTA and five organic reagents inhibited the enzyme activity of BaLPMO10. Finally, BaLPMO10 was applied in biomass conversion. The degradation of corn stover pretreated with different steam explosions was performed. BaLPMO10 and cellulase had the best synergistic degradation effect on corn stover pretreated at 200 °C for 12 min, improving reducing sugars by 9.2% compared to cellulase alone. BaLPMO10 was found to be the most efficient for ethylenediamine-pretreated Caragana korshinskii by degrading three different biomasses, increasing the content of reducing sugars by 40.5% compared to cellulase alone following co-degradation with cellulase for 48 h. The results of scanning electron microscopy revealed that BaLPMO10 disrupted the structure of Caragana korshinskii, making its surface coarse and poriferous, which increased the accessibility of other enzymes and thus promoted the process of conversion. These findings provide guidance for improving the efficiency of enzymatic digestion of lignocellulosic biomass.

Effect of enzymatic treatment on Eucalyptus globulus vessels passivation

Hardwood vessel elements generate problems in industrial uncoated wood-free printing paper operation, causing vessel picking and ink refusal. These problems are mitigated using mechanical refining at the cost of paper quality. Vessel enzymatic passivation, altering its adhesion to the fiber network and reducing its hydrophobicity is a way of improving paper quality. The object of this paper is to study how the enzymatic treatment by xylanase and by an enzymatic cocktail containing cellulases and laccases affect elemental chlorine free bleached Eucalyptus globulus vessel and fiber porosities, bulk, and surface chemical compositions. Thermoporosimetry revealed the vessel structure to be more porous, surface analysis showed its lower O/C ratio and bulk chemistry analysis its higher hemicellulose content. Enzymes had different effects on porosity, bulk and surface composition of fibers and vessels, affecting vessel adhesion and hydrophobicity. Vessel picking count decreased 76% for papers containing vessels treated with xylanase and 94% for the papers with vessels treated with the enzymatic cocktail. Fiber sheet samples had lower water contact angle (54.1º) than vessels rich sheets (63.7º), that reduced with xylanase (62.1º) and cocktail (58.4º). It is proposed that differences in vessel and fiber porosity structures affect the enzymatic attacks, eventually causing vessel passivation.

Production of Biomodified Bleached Kraft Pulp by Catalytic Conversion Using Penicillium verruculosum Enzymes: Composition, Properties, Structure, and Application

The global development of the bioeconomy is impossible without technologies for comprehensive processing of plant renewable resources. The use of proven pretreatment technologies raises the possibility of the industrial implementation of the enzymatic conversion of polysaccharides from lignocellulose considering the process’s complexity. For instance, a well-tuned kraft pulping produces a substrate easily degraded by cellulases and hemicelulases. Enzymatic hydrolysis of bleached hardwood kraft pulp was carried out using an enzyme complex of endoglucanases, cellobiohydrolases, β-glucosidases, and xylanases produced by recombinant strains of Penicillium verruculosum at a 10 FPU/g mixture rate and a 10% substrate concentration. As a result of biocatalysis, the following products were obtained: sugar solution, mainly glucose, xylobiose, xylose, as well as other minor reducing sugars; a modified complex based on cellulose and xylan. The composition of the biomodified kraft pulp was determined by HPLC. The method for determining the crystallinity on an X-ray diffractometer was used to characterize the properties. The article shows the possibility of producing biomodified cellulose cryogels by amorphization with concentrated 85% H3PO4 followed by precipitation with water and supercritical drying. The analysis of the enzymatic hydrolysate composition revealed the predominance of glucose (55–67%) among the reducing sugars with a maximum content in the solution up to 6% after 72 h. The properties and structure of the modified kraft pulp were shown to change during biocatalysis; in particular, the crystallinity increased by 5% after 3 h of enzymatic hydrolysis. We obtained cryogels based on the initial and biomodified kraft pulp with conversion rates of 35, 50, and 70%. The properties of these cryogels are not inferior to those of cryogels based on industrial microcrystalline cellulose, as confirmed by the specific surface area, degree of swelling, porosity, and SEM images. Thus, kraft pulp enzymatic hydrolysis offers prospects not only for producing sugar-rich hydrolysates for microbiological synthesis, but also cellulose powders and cryogels with specified properties.

Influence of Pine and Alder Woodchips Storage Method on the Chemical Composition and Sugar Yield in Liquid Biofuel Production

The aim of this study was to investigate the effect of storing methods of woodchips from two species, pine (Pinus sylvestris L.) and alder (Alnus Mill.), on the basic chemical composition and sugar yield in liquid biofuel production. Two methods of storing woody biomass were used in the study—an open pile and a cover pile. The wood was felled at the end of November and was stored as industrial chips for eight months from December onward. After this time, material was collected for chemical composition analyses and enzymatic hydrolysis. The results of the chemical composition analysis of the wood for both studied species showed the influence of the type of storage on the composition of the individual structural components of the wood. Based on the results of the enzymatic hydrolysis of the woody biomass, it can be seen that, irrespective of the hydrolysed material (wood, cellulose, holocellulose), the material from the biomass stored in the open pile gave higher results. The hydrolysis efficiency also increased with time, independent of the type of material that was hydrolysed. The highest sugar yield from the enzymatic hydrolysis of wood was obtained for alder wood stored in an open pile. The highest sugar yield from the enzymatic hydrolysis of cellulose was obtained for cellulose extracted from alder wood—as well—that had been stored in an open pile.

Bioconversion of Renewable Plant Biomass. Second-Generation Biofuels: Raw Materials, Biomass Pretreatment, Enzymes, Processes, and Cost Analysis

The review discusses various aspects of renewable plant biomass conversion and production of the second-generation biofuels, including the types of plant biomass, its composition and reaction ability in the enzymatic hydrolysis, and various pretreatment methods for increasing the biomass reactivity. Conversion of plant biomass into sugars requires the use of a complex of enzymes, the composition of which should be adapted to the biomass type and the pretreatment method. The efficiency of enzymatic hydrolysis can be increased by optimizing the composition of the enzymatic complex and by increasing the catalytic activity and operational stability of its constituent enzymes. The availability of active enzyme producers also plays an important role. Examples of practical implementation and scaling of processes for the production of second-generation biofuels are presented together with the cost analysis of bioethanol production.

Biocatalytic Process Optimization

Biocatalysis refers to the use of microorganisms and enzymes in chemical reactions, has become increasingly popular and is frequently used in industrial applications due to the high efficiency and selectivity of biocatalysts [...]