Pt/Re/CeO2 Based Catalysts for CO-Water–Gas Shift Reaction: from Powders to Structured Catalyst

The Route from Green H2 Production through Bioethanol Reforming to CO2 Catalytic Conversion: A Review

Currently, a progressively different approach to the generation of power and the production of fuels for the automotive sector as well as for domestic applications is being taken. As a result, research on the feasibility of applying renewable energy sources to the present energy scenario has been progressively growing, aiming to reduce greenhouse gas emissions. Following more than one approach, the integration of renewables mainly involves the utilization of biomass-derived raw material and the combination of power generated via clean sources with conventional power generation systems. The aim of this review article is to provide a satisfactory overview of the most recent progress in the catalysis of hydrogen production through sustainable reforming and CO2 utilization. In particular, attention is focused on the route that, starting from bioethanol reforming for H2 production, leads to the use of the produced CO2 for different purposes and by means of different catalytic processes, passing through the water–gas shift stage. The newest approaches reported in the literature are reviewed, showing that it is possible to successfully produce “green” and sustainable hydrogen, which can represent a power storage technology, and its utilization is a strategy for the integration of renewables into the power generation scenario. Moreover, this hydrogen may be used for CO2 catalytic conversion to hydrocarbons, thus giving CO2 added value.

Catalysts for Sustainable Hydrogen Production: Preparation, Applications and Process Integration

The earth is experiencing a series of epochal emergencies, directly related to the overexploitation of natural resources [...]

Co3 O4 -CeO2 Nanocomposites for Low-Temperature CO Oxidation

In an effort to combine the favorable catalytic properties of Co₃ O₄ and CeO₂ , nanocomposites with different phase distribution and Co₃ O₄ loading were prepared and employed for CO oxidation. Synthesizing Co₃ O₄ -modified CeO₂ via three different sol-gel based routes, each with 10.4 wt % Co₃ O₄ loading, yielded three different nanocomposite morphologies: CeO₂ -supported Co₃ O₄ layers, intermixed oxides, and homogeneously dispersed Co. The reactivity of the resulting surface oxygen species towards CO were examined by temperature programmed reduction (CO-TPR) and flow reactor kinetic tests. The first morphology exhibited the best performance due to its active Co₃ O₄ surface layer, reducing the light-off temperature of CeO₂ by about 200 °C. In contrast, intermixed oxides and Co-doped CeO₂ suffered from lower dispersion and organic residues, respectively. The performance of Co₃ O₄ -CeO₂ nanocomposites was optimized by varying the Co₃ O₄ loading, characterized by X-ray diffraction (XRD) and N₂ sorption (BET). The 16-65 wt % Co₃ O₄ -CeO₂ catalysts approached the conversion of 1 wt % Pt/CeO₂ , rendering them interesting candidates for low-temperature CO oxidation.

Synthesis of Catalytic Ni/Cu Nanoparticles from Simulated Wastewater on Li–Al Mixed Metal Oxides for a Two-Stage Catalytic Process in Ethanol Steam Reforming: Catalytic Performance and Coke Properties

This work recovered Ni or Cu cations from simulated electroplating wastewater to synthesize Ni/Cu nano-catalysts for H2 generation by ethanol steam reforming (ESR). Aluminum lathe waste was used as a framework to prepare the structured catalyst. Li–Al–CO3 layered double hydroxide (LDH) was electrodeposited on the surface of the framework. The LDH was in a platelet-like structure, working as a support for the formation of the precursor of the metal catalysts. The catalytic performance and the coke properties of a 6Cu_6Ni two-stage catalyst configuration herein used for ESR catalytic reaction were studied. The Cu–Ni two-stage catalyst configuration (6Cu_6Ni) yielded more H2 (~10%) than that by using the Ni-based catalyst (6Ni) only. The 6Cu_6Ni catalyst configuration also resulted in a relatively stable H2 generation rate vs. time, with nearly no decline during the 5-h reaction. Through the pre-reaction of ethanol-steam mixture with Cu/LiAlO2 catalyst, the Ni/LiAlO2 catalyst in the 6Cu_6Ni catalyst configuration could steadily decompose acetaldehyde, and rare acetate groups, which would evolve condensed coke, were formed. The Ni nanoparticles were observed to be lifted and separated by the carbon filaments from the support and had no indication of sintering, contributing to the bare deactivation of the Ni/LiAlO2 catalyst in 6Cu_6Ni.

Main Hydrogen Production Processes: An Overview

Due to its characteristics, hydrogen is considered the energy carrier of the future. Its use as a fuel generates reduced pollution, as if burned it almost exclusively produces water vapor. Hydrogen can be produced from numerous sources, both of fossil and renewable origin, and with as many production processes, which can use renewable or non-renewable energy sources. To achieve carbon neutrality, the sources must necessarily be renewable, and the production processes themselves must use renewable energy sources. In this review article the main characteristics of the most used hydrogen production methods are summarized, mainly focusing on renewable feedstocks, furthermore a series of relevant articles published in the last year, are reviewed. The production methods are grouped according to the type of energy they use; and at the end of each section the strengths and limitations of the processes are highlighted. The conclusions compare the main characteristics of the production processes studied and contextualize their possible use.

Platinum Based Catalysts in the Water Gas Shift Reaction: Recent Advances

The water gas shift (WGS) is an equilibrium exothermic reaction, whose corresponding industrial process is normally carried out in two adiabatic stages, to overcome the thermodynamic and kinetic limitations. The high temperature stage makes use of iron/chromium-based catalysts, while the low temperature stage employs copper/zinc-based catalysts. Nevertheless, both these systems have several problems, mainly dealing with safety issues and process efficiency. Accordingly, in the last decade abundant researches have been focused on the study of alternative catalytic systems. The best performances have been obtained with noble metal-based catalysts, among which, platinum-based formulations showed a good compromise between performance and ease of preparation. These catalytic systems are extremely attractive, as they have numerous advantages, including the feasibility of intermediate temperature (250–400 °C) applications, the absence of pyrophoricity, and the high activity even at low loadings. The particle size plays a crucial role in determining their catalytic activity, enhancing the performance of the nanometric catalytic systems: the best activity and stability was reported for particle sizes < 1.7 nm. Moreover the optimal Pt loading seems to be located near 1 wt%, as well as the optimal Pt coverage was identified in 0.25 ML. Kinetics and mechanisms studies highlighted the low energy activation of Pt/Mo2C-based catalytic systems (Ea of 38 kJ·mol−1), the associative mechanism is the most encountered on the investigated studies. This review focuses on a selection of recent published articles, related to the preparation and use of unstructured platinum-based catalysts in water gas shift reaction, and is organized in five main sections: comparative studies, kinetics, reaction mechanisms, sour WGS and electrochemical promotion. Each section is divided in paragraphs, at the end of the section a summary and a summary table are provided.