Effect of Ag2S Nanocrystals/Reduced Graphene Oxide Interface on Hydrogen Evolution Reaction

Defect-induced atomic-level intimate interface of a hollow Ov-CeO2/CdS photocatalyst with a Z-scheme to boost hydrogen evolution

Construction of Z-scheme heterojunction catalysts with high-speed charge transfer channels for efficient photocatalytic hydrogen production from water splitting is still a challenge. In this work, a lattice-defect-induced atom migration strategy is proposed to construct an intimate interface. The oxygen vacancies of cubic CeO₂ obtained from a Cu₂O template are used to induce lattice oxygen migration and form SO bonds with CdS to form a close contact heterojunction with a hollow cube. The hydrogen production efficiency reaches ∼12.6 mmol·g^-1·h^-1 and maintains a high value over 25 h. A series of photocatalytic tests combined with density functional theory (DFT) calculations show that the close contact heterostructure not only promotes the separation/transfer of photogenerated electron-hole pairs but also regulates the intrinsic catalytic activity of the surface. A large number of oxygen vacancies and SO bonds at the interface participate in charge transfer, which accelerates the migration of photogenerated carriers. The hollow structure improves the ability to capture visible light. Therefore, the synthesis strategy proposed in this work, as well as the in-depth discussion of the interface chemical structure and charge transfer mechanism, provides new theoretical support for the further development of photolytic hydrogen evolution catalysts.

Catalytically active silver nanoparticles stabilized on a thiol-functionalized metal-organic framework for an efficient hydrogen evolution reaction

A post-synthetic technique, Solvent Assisted Ligand Incorporation (SALI), was used for thiol functionalization in the zirconium-based metal-organic framework NU-1000. This thiol-functionalized MOF was employed as a support for the growth of silver nanoparticles (Ag NPs) through coordination of a Ag(I) complex with a node-anchored thiol-ligand, followed by the reduction of Ag(I) to Ag(0). X-ray photoelectron spectroscopy revealed that the ratio of Ag(0) to Ag(I) proportionally increased with the loading of silver ions. The HER activity increased with the enhancement of Ag(0) in the system and the best efficiency was observed for the composite with ∼95% Ag(0). This composite displayed an overpotential of 165 mV in an acidic medium at 10 mA cm^-2 and a Tafel slope of 53 mA dec^-1. The loading of silver beyond the optimum value led to the aggregation of the particles which affected the overpotential substantially. The catalyst demonstrated appreciable static stability for 24 h, which promotes the use of the material as an HER catalyst. Therefore, these results emphasized that Ag NPs embedded onto a thiol-functionalized MOF is a propitious material for developing a clean and renewable energy source.

Silver sulfide decorated carbonaceous sawdust/ES-PANI composites as salt-resistant solar steam generator

Solar steam generation (SSG) is a potential approach for resolving the global water and energy crisis while causing the least amount of environmental damage. However, using adaptable photothermal absorbers with salt resistance through a simple, scalable, and cost-effective production approach is difficult. Herein, taking advantage of the ultra-fast water transportation in capillaries, and the large seawater storage capacity of wood, we develop a highly efficient natural evaporator. The wood wastes (sawdust) were carbonized at low temperatures to fabricate a green and low-cost carbonaceous porous material (CW). To enhance the salt resistance in high saline water, this evaporator was coated with polyaniline emeraldine salt (ES-PANI) which was synthesized through facile and cost-effective one-step oxidation of aniline. Furthermore, the composite was decorated with silver sulfide to increase the evaporation rate which reached up to 1.1 kg m⁻² h⁻¹ under 1 sun irradiation with 91.5% efficiency. Besides, the evaporator performs exceptionally well over 10 cycles due to the salt resistance capability of ES-PANI which generates a “Donnan exclusion” effect against cations in saline water. The Ag₂S@PANI/CW evaporator may be a viable large-scale generator of drinking water due to its high efficiency for energy conversion, simple and low-cost fabrication approach, salt-resistance, and durability.

Solar steam generation (SSG) is a potential approach for resolving the global water and energy crisis while causing the least amount of environmental damage.

RuCo Alloy Nanoparticles Embedded into N-Doped Carbon for High Efficiency Hydrogen Evolution Electrocatalyst

For large-scale and sustainable water electrolysis, it is of great significance to develop cheap and efficient electrocatalysts that can replace platinum. Currently, it is difficult for most catalysts to combine high activity and stability. To solve this problem, we use cobalt to regulate the electronic structure of ruthenium to achieve high activity, and use carbon matrix to protect alloy nanoparticles to achieve high stability. Herein, based on the zeolitic imidazolate frameworks (ZIFs), a novel hybrid composed of RuCo alloy nano-particles and N-doped carbon was prepared via a facile pyrolysis-displacement-sintering strategy. Due to the unique porous structure and multi-component synergy, the optimal RuCo500@NC750 material in both acidic and alkaline media exhibited eminent HER catalytic activity. Notably, the 3-RuCo500@NC750 obtained a current density of 10 mA cm−2 at 22 mV and 31 mV in 0.5 M H2SO4 and 1.0 M KOH, respectively, comparable to that of the reference Pt/C catalyst. Furthermore, the Tafel slopes of the catalyst are 52 mV Dec−1 and 47 mV Dec−1, respectively, under acid and alkali conditions, and the catalyst has good stability, indicating that it has broad application prospects in practical electrolytic systems. This work contributes to understanding the role of carbon-supported polymetallic alloy in the electrocatalytic hydrogen evolution process, and provides some inspiration for the development of a high efficiency hydrogen evolution catalyst.

Probing the Surface Chemistry of Nanoporous Gold via Electrochemical Characterization and Atom Probe Tomography

Surface chemistry information is crucial in understanding catalytic and sensing mechanisms. However, resolving the outermost monolayer composition of metallic nanoporous materials is challenging due to the high tortuosity of their morphology. In this study, we first elaborate on the capabilities and limitations of atom probe tomography (APT) in resolving interfaces. Subsequently, an electrochemical approach is designed to characterize the surface composition of nanoporous gold (NPG), developed from dealloying an inexpensive precursor (95 at. % Ag, 5 at. % Au), by the means of aqueous electrochemical measurements of the selective electrosorption of sulfide ions, which react strongly with Ag, but to a significantly lesser extent with Au. Accordingly, cyclic voltammetry was performed at various scan rates on NPG in alkaline aqueous solutions (0.2 M NaOH; pH 13) in the presence and absence of 1 mM Na2S. Calibrations via similar voltammetric measurements on pure polycrystalline Ag and Au surfaces allowed for a quantitative estimation for the Ag surface coverage of NPG. The sensitivity threshold for the detection of the adsorbate-Ag interaction was assessed to be approximately 2% Ag surface coverage. As curves measured on NPG only showed featureless capacitive currents, no faradaic charge density associated with sulfide electrosorption could be detected. This study opens a new avenue to gain further insight into the monolayer surface coverage of metallic nanoporous materials and assists in enhancement of the interpretation of APT reconstructions.