Fenton Degradation of Ofloxacin Using a Montmorillonite–Fe3O4 Composite

Fenton degradation of ofloxacin antibiotic using calcium alginate beads impregnated with Fe3O4-montmorillonite composite

The primary aim of this study is to develop an economical, stable, and effective heterogeneous catalyst for wastewater remediation via the Fenton oxidation process. For this purpose, Fe₃O₄-montmorillonite alginate (FeMA) composite beads were synthesized by entrapping Fe₃O₄-montmorillonite in calcium alginate beads. The performance of the catalysts was evaluated via the Fenton degradation of ofloxacin (OFL), an antibiotic that is frequently detected in water bodies. The physiochemical properties of the FeMA composite beads were characterized using X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscope/energy dispersive X-ray (FESEM/EDX), Brunauer-Emmett-Teller (BET) analysis, Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric analysis (TGA). FeMA composite beads were found to have a higher surface area, higher porosity, and better thermal stability compared to pristine alginate beads. The composite beads were subsequently used for Fenton degradation of ofloxacin (OFL) in an aqueous solution. The effects of Fe₃O₄-montmorillonite loading on alginate, FeMA composite beads dosage, initial solution pH, initial OFL concentration, different oxidants, H₂O₂ dosage, reaction temperature, and inorganic salts on Fenton degradation of OFL in aqueous solution was investigated. The results revealed that the percentage of OFL degradation reached about 80 % under optimized conditions, while the total organic carbon (TOC) removal reached about 53 %. The entrapment of Fe₃O₄-montmorillonite in alginate beads results in less iron ions leaching compared to previous observation, and the efficiency remains constant over the five cycles investigated. The kinetics of the Fenton degradation process are best fitted to the pseudo-first-order kinetic model. It is therefore believed that FeMA composite beads can be a promising material for wastewater remediation via the Fenton oxidation process.

An effective natural mineral-catalyzed heterogeneous electro-Fenton method for degradation of an antineoplastic drug: Modeling by a neural network

In this study, the heterogeneous electro-Fenton method was used to remove Paclitaxel as an antineoplastic medicine. The cathode based on three-dimensional graphene (3DG) was applied as a gas diffusion electrode. The potential of five eco-friendly and recyclable iron minerals derived from nature (Magnetite, Siderite, Hematite, Limonite, and Pyrite) was investigated. Among the applied iron minerals, Pyrite showed the best, and Magnetite and Siderite showed good catalytic activity at pH 3.0. The current intensity of 300 mA, pH_i 7.0, Paclitaxel concentration of 3 mg L^-1, amount of Pyrite 4.5 g L^-1, and time of 120 min was the optimum condition of the process with the removal efficiency of 99.13% in the presence of Pyrite. Repeating the experiments eight times revealed the reusability of the prepared 3DG as a cathode. Also, using radical scavengers indicated the principal role of the hydroxyl radicals (OH) in the treatment process. Analysis of total organic carbon reached 77.64% mineralization of 3 mg L^-1 Paclitaxel at 360 min. Finally, ten by-products of small molecules were identified by gas chromatography-mass spectrometry device.