The Catalytic Oxidation of Formaldehyde by FeOx-MnO2-CeO2 Catalyst: Effect of Iron Modification

The catalytic efficacy of modified manganese-cobalt oxides for room-temperature oxidation of formaldehyde in air

Formaldehyde (FA) is a hazardous indoor air pollutant with carcinogenic propensity. Oxidation of FA in the dark at low temperature (DLT) is a promising strategy for its elimination from indoor air. In this light, binary manganese-cobalt oxide (0.1 to 5 mol L-1-MnCo2O4) is synthesized and modified in an alkaline medium (0.1-5 mol L-1 potassium hydroxide) for FA oxidation under room temperature (RT) conditions. Accordingly, 1-MnCo2O4 achieves 100 % FA conversion at RT (50 ppm and 7022 h-1 gas hourly space velocity (GHSV)). The catalytic activity of 1-MnCo2O4 is assessed further as a function of diverse variables (e.g., catalyst mass, relative humidity, FA concentration, molecular oxygen (O2) content, flow rate, and time on-stream). In situ diffuse reflectance infrared Fourier-transform spectroscopy confirms that FA molecules are adsorbed onto the active surface sites of 1-MnCo2O4 and oxidized into water (H2O) and carbon dioxide (CO2) through dioxymethylene (DOM) and formate (HCOO-) as the reaction intermediates. According to the density functional theory simulations, the higher catalytic activity of 1-MnCo2O4 can be attributed to the combined effects of its meritful surface properties (e.g., the firmer attachment of FA molecules, lower energy cost of FA adsorption, and lower desorption energy for CO2 and H2O). This work is the first report on the synthesis of alkali (KOH)-modified MnCo2O4 and its application toward the FA oxidative removal at RT in the dark. The results of this study are expected to provide valuable insights into the development of efficient and cost-effective non-noble metal catalysts against indoor FA at DLT.

Preparation of a Novel Formaldehyde-Free Impregnated Decorative Paper Containing MnO2 Nanoparticles for Highly Efficient Formaldehyde Removal

The loading of catalytic manganese dioxide (MnO₂) nanoparticles onto an impregnated decorative paper has been an effective method for the removal of indoor formaldehyde (HCHO) pollutants. However, its preparation can present numerous challenges, including instability in dipping emulsions and leaching. In this investigation, a novel and stable formaldehyde-free polyacrylate dipping emulsion containing MnO₂ particles was prepared and then back-coated on a decorative paper. To improve the dispersion and fixation, the MnO₂ was modified with silane. HCHO can undergo physical adsorption on the cellulosic fibers present in the paper, while it can also undergo chemical degradation into CO₂ within the MnO₂ groups. The silane not only enhanced the interfacial adhesion to a polyacrylate resin but also increased the interlayer distance, thereby creating a larger space for HCHO absorption. The impregnated decorative paper back-coated with 10 wt % of silane-modified MnO₂ exhibited a removal efficiency of approximately 90% for HCHO at 20 °C. The removal rate further improved to approximately 100% when the temperature was increased to 60 °C. Moreover, it is worth noting that the release of volatile organic compounds was exceptionally minimal. Additionally, the particleboard bonded with this impregnated decorative paper exhibited an extremely low emission of HCHO, with a value that approached 0 mg·L^-1. Furthermore, the bonding strength of the surface remained unaffected. Therefore, this study provides a simple and eco-friendly method for effectively removing HCHO, which can enhance indoor air quality.

Study on the Formaldehyde Oxidation Reaction of Acid-Treated Manganese Dioxide Nanorod Catalysts

Formaldehyde is an important downstream chemical of syngas. Furniture and household products synthesized from formaldehyde will slowly decompose and release formaldehyde again during use, which seriously affects indoor air quality. In order to solve the indoor formaldehyde pollution problem, this paper took the catalytic oxidation of formaldehyde as the research object; prepared a series of low-cost, acid-treated manganese dioxide nanorod catalysts; and investigated the effect of the acid-treatment conditions on the catalysts’ activity. It was found that the MnNR-0.3ac-6h catalyst with 0.3 mol/L sulfuric acid for 6 h had the best activity. The conversion rate of formaldehyde reached 98% at 150 °C and 90% at 25 °C at room temperature. During the reaction time of 144 h, the conversion rate of formaldehyde was about 90%, and the catalyst maintained a high activity. It was found that acid treatment could increase the number of oxygen vacancies on the surface of the catalysts and promote the production of reactive oxygen species. The amount of surface reactive oxygen species of the MnNR-0.3ac-6h catalyst was about 13% higher than that of the catalyst without acid treatment.

Polymer Composite-Based Materials with Photocatalytic Applications in Wastewater Organic Pollutant Removal: A Mini Review

The development of new technologies using nanomaterials has allowed scientists to design advanced processes with many applications in environmental protection, energy production and storage, and medicinal bio-mediated processes. Due to their significant potential applications in different branches of science, the development of new polymer composites represents a priority, especially for nano-technological processes. Interest in polymeric composites was outlined by the synthesis of a large number of nano- or mezzo-scale materials with targeted functional properties for polymer matrix hybridization. The present mini review explores some of the most representative and recent papers reporting the photocatalytic activity of polymer composites toward different organic compounds (dyes, pharmaceutically active molecules, phenol, etc.). The polymer composites were divided based on their composition and photocatalytic activity. TiO2- and ZnO-based polymeric composites have been described here in light of their photocatalytic activity toward different pollutants, such as rhodamine B, phenol, or methyl orange. Polymeric composites based on WO3, Fe2O3, or Bi2MoO6 were also described. The influence of different polymeric composites and photocatalytic parameters (light spectra and intensity, pollutant molecule and concentration, irradiation time, and photocatalyst dosage) on the overall photocatalytic efficiency indicates that semiconductor (TiO2, ZnO, etc.) insertion in the polymeric matrix can tune the photocatalytic activity without compromising the structural integrity. Future perspectives and limitations are outlined considering the systematic and targeted description of the reported results. Adopting green route synthesis and application can add economic and scientific value to the knowledgebase by promoting technological development based on photocatalytic designs.

A simple method to regulate surface hydroxy groups on Al2O3 for improving catalytic oxidation performance for HCHO on Pt/Al2O3

For supported noble metal catalysts, the properties of the support had great influence on the state of noble metals. Herein, we chose Al2O3 as model to find a simple method...