Glucose Conversion into 5-Hydroxymethylfurfural over Niobium Oxides Supported on Natural Rubber-Derived Carbon/Silica Nanocomposite

Combination of deep eutectic solvent and functionalized metal-organic frameworks as a green process for the production of 5-hydroxymethylfurfural and furfural from sugars

Biomass is an abundant and sustainable resource that can be converted into energy and chemicals. Therefore, the development of efficient methods for the conversion of biomass into platform intermediates is crucial. In this study, the one-pot conversion of sugars into 5-hydroxymethylfurfural (HMF) and furfural was achieved using the metal-organic framework combined with metal ions [MIL-101(Cr)] as a high-activity catalyst, and a deep eutectic solvent (choline chloride and lactic acid) as a green solvent. The optimal temperature, time, amount of catalyst used, and amount of deep eutectic solvent used were all determined. The highest HMF yield of 49.74% and furfural yield of 55.90% were obtained. The recyclability of the catalysts and deep eutectic solvent was also investigated. After three reaction runs, the HMF yield was still nearly 30.00%. Finally, the MIL-101(Cr) catalytic system was selected to study the kinetic mechanism underlying the conversion of glucose into HMF.

Understanding the cation exchange affinity in modified-MMT catalysts for the conversion of glucose to lactic acid

This study investigated the exchange affinity of Fe3+, Cu2+, and Zn2+ cations in sulfuric acid-purified montmorillonite (S-MMT) to enhance Lewis acid sites and subsequently improve the catalytic conversion of glucose to lactic acid. XRD analysis suggested the successful cation exchange process, leading to structural expansion of the resultant cation exchanged-MMTs (CE-MMTs). XRF and TGA indicated that Zn2+ had the highest exchange affinity, followed by Cu2+ and then Fe3+. This finding was further supported by the results of TPD-NH3 analysis and pyridine-adsorption test, which demonstrated that Zn-MMT had the highest total acid sites (TAS) and the ratio of Lewis acid-to-Brønsted acid surface site (LA/BA). These results indicated dominant presence of Lewis acid sites in Zn-MMT due to the higher amount of exchanged Zn2+ cations. Consistently, time-dependent catalytic studies conducted at 170 °C showed that a 7 h-reaction generated the highest lactic acid yield, with the catalytic performance increasing in the order of Fe-MMT < Cu-MMT < Zn-MMT. The study also observed the impact of adding alcohols as co-solvents with water at various ratios on the conversion of glucose to lactic acid catalysed by Zn-MMT. The addition of ethanol enhanced lactic acid yield, while methanol and propanol inhibited lactic acid formation. Notably, a water-to-ethanol ratio of 30 : 70 v/v% emerged as the optimal solvent condition, resulting in ca. 35 wt% higher lactic acid yield compared to using water alone. Overall, this study provides valuable insights into the cation exchange affinity of different cations in MMT catalysts and their relevance to the conversion of glucose to lactic acid. Furthermore, the incorporation of alcohol co-solvent presents a promising way of enhancing the catalytic activity of CE-MMTs.

Synthesis of Sulfonated Carbon from Discarded Masks for Effective Production of 5-Hydroxymethylfurfural

5-hydroxymethylfurfural (HMF), as one of the top ten important platform chemicals, can be used to produce 2,5-furandicarboxylic acid (FDCA), 2,5-dimethyl furan (DMF), levulinic acid, and other chemicals. An environmentally friendly system for the synthesis of sulfonated carbon materials from discarded masks has been proposed. A series of mask-based solid acid catalysts (bMC-SO3H) were prepared by a simple two-step process. Mechanochemical pretreatment (ball milling) of waste mask and sulfonated group precursor, followed by thermal carbonization under nitrogen gas, were used to synthesize sulfonated porous carbon. The total acid amount of the prepared bMC-SO3H was measured by the Boehm method, which exhibited 1.2–5.3 mmol/g. The addition of the sulfonated group precursor in the mechanochemical treatment (ball milling) process caused intense structure fragmentation of the discarded masks. These sulfonated porous carbons (bMC(600)-SO3H) as solid acid catalysts achieved fructose conversion of 100% and HMF yield of 82.1% after 120 min at 95 °C in 1-butyl-3-methylimidazolium chloride. The bMC-SO3H could be reused five times, during which both the HMF yield and fructose conversion were stable. This work provides a strategy for the synthesis of sulfonated carbon from discarded masks and efficient catalyzed fructose upgrading to HMF.