Bimetallic Pd-Co Nanoparticles Supported on Nitrogen-Doped Reduced Graphene Oxide as Efficient Electrocatalysts for Formic Acid Electrooxidation

Cyanogel-Induced Synthesis of RuPd Alloy Networks for High-Efficiency Formic Acid Oxidation

For direct formic acid fuel cells (DFAFC), palladium (Pd)-based alloy catalysts with competitive morphology and elemental composition are essential to boost the performance of the formic acid oxidation reaction (FAOR) in the anode zone. Herein, we design and synthesize RuPdx alloy nano-network structures (ANs) via the facile wet-chemical reduction of Pd-Ru cyanogel (Pdx [Ru(CN)6]y·aH2O) as an effective electrocatalyst for the FAOR. The formation of Pd-Ru cyanogel depends on the facile coordination of K2PdCl4 and K3 [Ru(CN)6]. The unique structure of cyanogel ensures the presentation of a three-dimensional mesoporous morphology and the homogeneity of the elemental components. The as-prepared RuPd3 ANs exhibit good electrocatalytic activity and stability for the FAOR. Notably, the RuPd3 ANs achieve a mass-specific activity of 2068.4 mA mg−1 in FAOR, which shows an improvement of approximately 16.9 times compared to Pd black. Such a competitive FAOR performance of RuPd3 ANs can be attributed to the advantages of structure and composition, which facilitate the exposure of more active sites, accelerate mass/electron transfer rates, and promote gas escape from the catalyst layer, as well as enhance chemical stability.

Recent Advances in Anode Electrocatalysts for Direct Formic Acid Fuel Cells - Part I - Fundamentals and Pd Based Catalysts

Direct formic acid fuel cells (DFAFCs) have gained immense importance as a source of clean energy for portable electronic devices. It outperforms other fuel cells in several key operational and safety parameters. However, slow kinetics of the formic acid oxidation at the anode remains the main obstacle in achieving a high power output in DFAFCs. Noble metal-based electrocatalysts are effective, but are expensive and prone to CO poisoning. Recently, a substantial volume of research work have been dedicated to develop inexpensive, high activity and long lasting electrocatalysts. Herein, recent advances in the development of anode electrocatalysts for DFAFCs are presented focusing on understanding the relationship between activity and structure. This review covers the literature related to the electrocatalysts based on noble metals, non-noble metals, metal-oxides, synthesis route, support material, and fuel cell performance. The future prospects and bottlenecks in the field are also discussed at the end.

Three-dimensional reduced graphene oxide decorated with cobalt metaphosphate as high cost-efficiency electrocatalysts for the hydrogen evolution reaction

The development of cost-effective non-noble metal electrocatalysts is critical for the research of renewable energy. Transition metal cobalt metaphosphate-based materials have the potential to replace the noble metal Pt. Hence, in this work, we synthesize three-dimensional graphene-supported cobalt metaphosphate (Co(PO₃)₂-3D RGO) for the first time through the one-step hydrothermal synthesis method at low temperature with the aid of PH₃ phosphating. In a 0.5 mol L⁻¹ H₂SO₄ solution, the obtained electrocatalyst exhibits excellent electrochemical activity for the hydrogen evolution reaction (HER) with a small overpotential of 176 mV at a current density of 10 mA cm⁻² and a Tafel slope of 63 mV dec⁻¹. Additionally, in a 1 mol L⁻¹ KOH solution, the electrocatalyst also shows outstanding HER activity with a small overpotential of 158 mV at a current density of 10 mA cm⁻² and a Tafel slope of 88 mV dec⁻¹. Co(PO₃)₂-3D RGO can maintain its catalytic activity for at least ten hours whether in acid or alkali. This work not only demonstrates an excellent electrocatalyst for the hydrogen evolution reaction, but also provides an extremely convenient preparation technology, which provides a new strategy for the development and utilization of high-performance electrocatalysts.

The development of cost-effective non-noble metal electrocatalysts is critical for the research of renewable energy.