Optimizing In Situ Combustion with Manganese (II) Oxide Nanoparticle-Catalyzed Heavy Oil Oxidation

The combustion front is a crucial parameter in determining the efficiency of in situ combustion techniques during enhanced oil recovery. Nowadays, catalytic systems are widely believed to be an efficient tool to stabilize the combustion front. This study aimed to investigate the synthesis and catalytic activity of manganese (II) oxide nanoparticles in the high-temperature oxidation of heavy oils. The synthesis and catalytic activity of manganese (II) oxide nanoparticles in the high and low-temperature oxidation regions of heavy oil were investigated in this study. The obtained nanoparticles were characterized and studied by using X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), thermogravimetric analysis (TG), nitrogen adsorption and desorption measurements, and differential scanning calorimetry (DSC) thermal analysis combined with the Kissinger isoconversional method. The obtained results showed that the synthesized nanoparticles had an average size of 17 ± 4 nm and a specific surface area of 38.2 ± 0.1 m2 g−1, with a pore size distribution of ~8 nm. The low and high-temperature oxidation processes’ activation energies were found to be 98.9 ± 0.7 kJ/mol and 151.9 ± 0.6 kJ/mol, respectively, in the presence of nanoparticles. However, these parameters were found to be equal to 110.1 ± 1.8 kJ/mol and 142.8 ± 8.3 kJ/mol, respectively, in the absence of nanoparticles. These data were processed further by calculating the corresponding reaction rates. The obtained results indicated that the rate of heavy oil oxidation was higher in the presence of the synthesized nanoparticles, which could play a critical role in stabilizing the combustion front in the in situ combustion process.

Molecular Characteristics of Jimusaer Shale Oil from Xinjiang, China

Increasing attention is currently obtained by the exploitation and utilization of unconventional energy sources globally. Jimusaer shale oil (JSO) was prepared by dry distillation from oil shale in Jimusaer, Xinjiang, China. Using n-heptane and toluene as solvents, saturate (SA), aromatic (AR), resin (RE), and asphaltene (AS) samples were produced from JSO. Samples were subsequently analyzed by elemental analysis (EA), thermogravimetric analysis (TG-DTG), infrared analysis (FT-IR), high-performance gel chromatography (GPC), and nuclear magnetic resonance (¹H-NMR and ¹³C-NMR). In terms of basic properties, element content, classification of combustible minerals, and refining performance, JSO, which has a high H/C value, low carbon residue yield, low metal content, and excellent refining-processing performance, is considered a high-quality shale oil compared with the shale oil produced in other areas. The refining performance of JSO is even comparable with petroleum. According to column chromatography, the contents of SA, AR, RE, and AS in JSO are 54.32, 18.86, 25.81, and 1.01%, respectively. The results of FT-IR and NMR (¹H-NMR and ¹³C-NMR) demonstrated that the chain alkane or aromatic cycloalkyl substituents of SA, AR, and RE decrease sequentially, while the number of aromatic rings and cycloalkane rings and the degree of condensation increase sequentially. These results indicate that the chain alkanes with a small number of cycloalkanes are the main component of SA. The AR and RE contain more thick-ring aromatic hydrocarbons. According to GPC, the molecular weight (M _n) of JSO is 845 g·mol^-1, and those of SA, AR, and RE are 702, 1107, and 2218 g·mol^-1, respectively. The estimated molecular formulas (M _af) of JSO, SA, AR, and RE, which were calculated based on the combined results of GPC and EA, are C_57.91H_115.60O_1.38N_0.79S_0.04, C_48.02H_101.79O_0.69N_0.85S_0.03, C_76.96H_137.16O_1.08N_1.87S_0.09, and C_156.24H_247.75O_1.46N_4.42S_0.32.

Changes in Heavy Oil Saturates and Aromatics in the Presence of Microwave Radiation and Iron-Based Nanoparticles

Our knowledge of electromagnetic heating’s effect on heavy oil upgrading is largely based on very limited data. The aim of the present research was thus to study in detail the effect of microwave exposure in the absence and presence of nanosized magnetite on the composition of heavy oil. The obtained data reveal that the use of nanosized magnetite improves not only microwave radiation application as a result of its absorption and release of thermal energy but also that these nanoparticles have a catalytic ability to break carbon–heteroatom bonds in the composition of resins and asphaltene molecules. In fact, the overall reduction in asphaltenes or resins does not always adequately describe very important changes in asphaltene composition. Even a small fraction of broken carbon–heteroatom bonds can lead to an increase in the mobility of asphaltenes. Moreover, this study has shed light on the important evidence for asphaltenes’ transformation, which was found to be the formation of light aromatic compounds, such as alkylbenzenes, naphthalenes and phenanthrenes. These compounds were fixed in the composition of the aromatic fraction. We believe that these compounds could be the fragments obtained from asphaltenes’ degradation. The evidence from this study points toward the idea that asphaltenes’ destruction is crucial for increasing oil mobility in the reservoir rock during its thermal stimulation.