Palladium-Nickel Electrocatalysts on Nitrogen-Doped Reduced Graphene Oxide Nanosheets for Direct Hydrazine/Hydrogen Peroxide Fuel Cells

Carbon Nanotube-Supported Bimetallic Core-Shell (M@Pd/CNT (M: Zn, Mn, Ag, Co, V, Ni)) Cathode Catalysts for H2O2 Fuel Cells

M@Pd/CNT (M: Zn, Mn, Ag, Co, V, Ni) core-shell and Pd/CNT nanoparticles were prepared by sodium borohydride reduction and explored as cathode catalysts for the hydrogen peroxide reduction reaction. Electrochemical and physical characterization techniques are applied to explore the characteristics of the produced electrocatalysts. The cyclic voltammetry (CV) experiments show that Zn@Pd/CNT-modified electrodes have a current density of 273.2 mA cm-2, which is 3.95 times higher than that of Pd/CNT. According to the chronoamperometric curves, Zn@Pd/CNT has the highest steady-state current density for the H2O2 electro-reduction process among the synthesized electrocatalysts. Moreover, electrochemical impedance spectroscopy (EIS) spectra confirmed the previous electrochemical results due to the lowest charge transfer resistance (35 Ω) with respect to other electrocatalysts.

Ru-Ni nanoparticles electrodeposited on rGO/Ni foam as a binder-free, stable and high-performance anode catalyst for direct hydrazine fuel cell

Bimetallic Ru-Ni nanoparticles was synthesized on the reduced graphene oxide decorated Ni foam (Ru-Ni/rGO/NF) by electroplating method to be utilized as the anode electrocatalyst for direct hydrazine-hydrogen peroxide fuel cells (DHzHPFCs). The synthesized electrocatalysts were characterized by X-ray diffraction, Field emission scanning electron microscopy, Fourier transform infrared spectroscopy, and Raman spectroscopy. The electrochemical properties of catalysts towards hydrazine oxidation reaction in an alkaline medium were evaluated by cyclic voltammetry, chronoamperometry, and electrochemical impedance spectroscopy. In the case of Ru1-Ni3/rGO/NF electrocatalyst, Ru1-Ni3 provided active sites due to low activation energy (22.24 kJ mol-1) for hydrazine oxidation reaction and reduced graphene oxide facilitated charge transfer by increasing electroactive surface area (EASA = 677.5 cm2) with the small charge transfer resistance (0.1 Ω cm2). The CV curves showed that hydrazine oxidation on the synthesized electrocatalysts was a first-order reaction in low concentrations of N2H4 and the number of exchanged electrons was 3.0. In the single cell of the of direct hydrazine-hydrogen peroxide fuel cell, the maximum power density value of Ru1-Ni3/rGO/NF electrocatalyst was 206 mW cm-2 and the open circuit voltage was 1.73 V at 55 °C. These results proved that the Ru1-Ni3/rGO/NF is a promising candidate for using as the free-binder anode electrocatalyst in the future application of direct hydrazine-hydrogen peroxide fuel cells due to its excellent structural stability, ease of synthesis, low cost, and high catalytic performance.

Succulent-plant-like Ni-Co alloy efficient catalysts for direct borohydride fuel cells

A Ni-Co alloy catalyst with a unique succulent-plant-like morphology is prepared by a simple electrodeposition method, while the effects of deposition conditions on its performance are also investigated systematically. The research results show that the Ni_0.889-Co_0.111 catalyst exhibits excellent activity, selectivity, and stability to the borohydride oxidation reaction. Moreover, when Ni_0.889-Co_0.111 is assembled as the anode catalyst, the direct borohydride fuel cell delivers a peak power density of 490 mW cm^-2 and an open-circuit voltage of 1.87 V at 343 K and can run stably for dozens of hours. The significant improvement in Ni-Co catalyst performance can be attributed to its unique succulent-plant-like morphology and the introduction of an appropriate amount of Co.

A modified carbon paste electrode with N-rGO/CuO nanocomposite and ionic liquid for the efficient and cheap voltammetric sensing of hydroquinone in water specimens

This paper reports a voltammetric sensor based on copper oxide nanoparticles on nitrogen-doped reduced graphene oxide nanocomposite (N-rGO/CuO)-ionic liquid modified carbon paste electrode (N-rGO/CuO-ILCPE) for determining the hydroquinone (HQ). The N-rGO/CuO was prepared by a facile protocol, followed by characterization via fourier transform-infrared (FT-IR) patterns, field emission-scanning electron microscopy (FE-SEM), energy dispersive X-ray (EDX), and X-ray diffraction (XRD) analysis. The electrochemical behaviour was linearly symmetrical to various hydroquinone levels (1.0-600.0 μM) with a narrow limit of detection (LOD = 0.25 μM). The diffusion coefficient was also estimated to be 4.1 × 10^-6 cm²/s. The N-rGO/CuO-ILCPE was impressively applicable in determination of hydroquinone in the real specimens.

Editorial for the Special Issue on "Nanoalloy Electrocatalysts for Electrochemical Devices"

Nanoscale science and technology dealing with materials synthesis, nanofabrication, nanoprobes, nanostructures, nanoelectronics, nano-optics, nanomechanics, nanodevices, nanobiotechnology, and nanomedicine is an exciting field of research and development in Europe, the United States, and other countries around the world [...].