Bacterial Competition for the Anode Colonization under Different External Resistances in Microbial Fuel Cells

Influence of Hydrodynamic Forces on Electroactive Bacterial Adhesion in Microbial Fuel Cell Anodes

This investigation examined the role of shear stress on the dynamic development of microbial communities within anodic biofilms in single-chamber microbial fuel cells (MFCs). Bacterial attachment to surfaces, often regarded as a crucial step in biofilm formation, may significantly contribute to the selection of electroactive bacteria (EAB). It is well established that hydrodynamic forces, particularly shear forces, have a profound influence on bacterial adhesion. This study postulates that shear stress could select EAB on the anode during the adhesion phase by detaching non-EAB. To examine this hypothesis, MFC reactors equipped with a shear stress chamber were constructed, creating specific shear stress on the anode. The progression of adhesion under various shear stress conditions (1, 10, and 50 mPa) was compared with a control MFC lacking shear stress. The structure of the microbial community was assessed using 16S rRNA gene (rrs) sequencing, and the percentage of biofilm coverage was analyzed using fluorescence microscopy. The results indicate a significant impact of shear stress on the relative abundance of specific EAB, such as Geobacter, which was higher (up to 30%) under high shear stress than under low shear stress (1%). Furthermore, it was noted that shear stress decreased the percentage of biofilm coverage on the anodic surface, suggesting that the increase in the relative abundance of specific EAB occurs through the detachment of other bacteria. These results offer insights into bacterial competition during biofilm formation and propose that shear stress could be utilized to select specific EAB to enhance the electroactivity of anodic biofilms. However, additional investigations are warranted to further explore the effects of shear stress on mature biofilms.

Untreated vs. Treated Carbon Felt Anodes: Impacts on Power Generation in Microbial Fuel Cells

This research sought to enhance the efficiency and biocompatibility of anodes in bioelectrochemical systems (BESs) such as microbial fuel cells (MFCs), with an aim toward large-scale, real-world applications. The study focused on the effects of acid-heat treatment and chemical modification of three-dimensional porous pristine carbon felt (CF) on power generation. Different treatments were applied to the pristine CF, including coating with carbon nanofibers (CNFs) dispersed using dodecylbenzene sulfonate (SDBS) surfactant and biopolymer chitosan (CS). These processes were expected to improve the hydrophilicity, reduce the internal resistance, and increase the electrochemically active surface area of CF anodes. A high-resolution scanning electron microscopy (HR-SEM) analysis confirmed successful CNF coating. An electrochemical analysis showed improved conductivity and charge transfer toward [Fe(CN)6]3-/4- redox probe with treated anodes. When used in an air cathode single-chamber MFC system, the untreated CF facilitated quicker electroactive biofilm growth and reached a maximum power output density of 3.4 W m-2, with an open-circuit potential of 550 mV. Despite a reduction in charge transfer resistance (Rct) with the treated CF anodes, the power densities remained unchanged. These results suggest that untreated CF anodes could be most promising for enhancing power output in BESs, offering a cost-effective solution for large-scale MFC applications.

Metaproteomic and Metagenomic-Coupled Approach to Investigate Microbial Response to Electrochemical Conditions in Microbial Fuel Cells

MFCs represent a promising sustainable biotechnology that enables the direct conversion of organic matter from wastewater into electricity using bacterial biofilms as biocatalysts. A crucial aspect of MFCs is how electroactive bacteria (EAB) behave and their associated mechanisms during extracellular electron transfer to the anode. A critical phase in the MFC start-up process is the initial colonization of the anode by EAB. Two MFCs were operated with an external resistance of 1000 ohms, one with an applied electrical voltage of 500 mV during the initial four days of biofilm formation and the other without any additional applied voltage. After stabilization of electricity production, total DNA and protein were extracted and sequenced from both setups. The combined metaproteomic/metagenomic analysis revealed that the application of voltage during the colonization step predominantly increased direct electron transfer via cytochrome c, mediated primarily by Geobacter sp. Conversely, the absence of applied voltage during colonization resulted in a broader diversity of bacteria, including Pseudomonas and Aeromonas, which participated in electricity production via mediated electron transfer involving flavin family members.

Selective Sensing in Microbial Fuel Cell Biosensors: Insights from Toxicity-Adapted and Non-Adapted Biofilms for Pb(II) and Neomycin Sulfate Detection

This study introduces the utilization of self-powered microbial fuel cell (MFC)-based biosensors for the detection of biotoxicity in wastewater. Current MFC-based biosensors lack specificity in distinguishing between different pollutants. To address this limitation, a novel approach is introduced, capitalizing on the adaptive capabilities of anodic biofilms. By acclimating these biofilms to specific pollutants, an enhancement in the selectivity of MFC biosensors is achieved. Notably, electrochemically active bacteria (EAB) were cultivated on 3D porous carbon felt with and without a model toxicant (target analyte), resulting in the development of toxicant-resistant anodic biofilms. The model toxicants, Pb2+ ions and the antibiotic neomycin sulfate (NS), were deployed at a concentration of 1 mg L-1 during MFC operation. The influence of toxicity on biofilm growth and power production was investigated through polarization and power density curves. Concurrently, the electrochemical activity of both non-adapted and toxicity-adapted biofilms was investigated using cyclic voltammetry. Upon maturation and attainment of peak powers, the MFC reactors were evaluated individually as self-powered biosensors for pollutant detection in fresh wastewater, employing the external resistor (ER) mode. The selected ER, corresponding to the maximum power output, was positioned between the cathode and anode of each MFC, enabling output signal tracking through a data logging system. Subsequent exposure of mature biofilm-based MFC biosensors to various concentrations of the targeted toxicants revealed that non-adapted mature biofilms generated similar current-time profiles for both toxicity models, whereas toxicity-adapted biofilms produced distinctive current-time profiles. Accordingly, these results suggested that merely by adapting the anodic biofilm to the targeted toxicity, distinct and identifiable current-time profiles can be created. Furthermore, these toxicity-adapted and non-adapted biofilms can be employed to selectively detect the pollutant via the differential measurement of electrical signals. This differentiation offers a promising avenue for selective pollutant detection. To the best of our current knowledge, this approach, which harnesses the natural adaptability of biofilms for enhanced sensor selectivity, represents a pioneering effort in the realm of MFC-based biosensing.

The versatility of microbial fuel cells as tools for organic matter monitoring

Water monitoring and remediation require robust, low-cost, and reliable test systems that can couple with prompt treatment interventions. Organic matter (BOD, COD), toxicants, heavy metals, and other pollutants in water need to be regularly inspected. Microbial fuel cells (MFCs) have already gained popularity as BOD biomonitoring systems as these don't need an external transducer or power source. Moreover, these systems are cost-effective, compact, biodegradable, reusable, portable, and applicable for on-site measurements. MFCs truly stands out as online BOD measurement devices as they provide wide detection range (0-25 g/L), low response time (2-4 min) and longer stability in continuous operations (2-5 years) in a cost-effective approach. This review examines the benefits, kinds, performance metrics, and signal optimization of the current state-of-the-art of the BOD measurement, with detailed focus on MFC-based BOD biomonitoring systems. This review covers the important technological breakthroughs in practical applications with associated bottlenecks to develop reliable sensing systems.

Cedar Wood-Based Biochar: Properties, Characterization, and Applications as Anodes in Microbial Fuel Cell

In this study, the relationship between pyrolysis temperature of woody biomass and physicochemical properties of derived biochar was investigated for microbial fuel cell (MFC) application. Physical and chemical properties of biochar were characterized for different pyrolysis temperatures. Results showed that biochar obtained at 400 °C was not conductor, while biochars prepared at 600 °C, 700 °C, and 900 °C exhibited decreased electrical resistivity of (7 ± 6) × 10³ Ω.m, (1.8 ± 0.2) Ω.m, and (16 ± 3) × 10^-3 Ω.m, respectively. Rising pyrolysis temperature from 400 to 700 °C exhibited honeycomb-like macroporous structures of biochar with an increase in the specific surface area from 310 to 484 m².g^-1. However, the production of biochar at 900 °C reduced its specific surface area to 136 m².g^-1 and caused the loss of the ordered honeycomb structure. MFCs using anodes based on biochar prepared at 900 °C produced maximum power densities ((9.9 ± 0.6) mW.m^-2) higher than that obtained with biochar pyrolyzed at 700 °C ((5.8 ± 0.1) mW.m^-2) and with conventional carbon felt anodes ((1.9 ± 0.2) mW.m^-2). SEM images of biochar-based anodes indicated the clogging of macropores in honeycomb structure of biochar prepared at 700 °C by growth of electroactive biofilms, which might impede the supply of substrate and the removal of metabolites from the inside of the electrode. These findings highlight that electrical conductivity of biochar is the major parameter for ensuring efficient anodes in microbial fuel cell application. Schematic representation of cedar wood-based biochar and its application as anode in MFC.