Prospects and Technical Challenges in Hydrogen Production through Dry Reforming of Methane

Interfacial Metal-Support Interaction and Catalytic Performance of Perovskite LaCrO3-Supported Ru Catalyst

Interfacial metal-support interaction (MSI) significantly affects the dispersion of active metals on the surface of the catalyst support and impacts catalyst performance. Understanding MSI is crucial for developing highly active and stable catalysts with a low metal loading, particularly for noble metal catalysts. In this work, we synthesized LaRuxCr1-xO3 catalysts with low Ru loading (x = 0.005, 0.01, and 0.02) using the sol-gel self-combustion method. We found that all of the Ru atoms immediately above or below the metal-support interface are closely bonded to the perovskite LaCrO3 surface lattice through Ru-O bonds, enhancing the MSI via interfacial reaction and charge transfer mechanisms. We identified a variety of Ru species, including small 3D Ru nanoparticles, 2D dispersed Ru surface atoms, and even 0D Ru single atoms. These highly dispersed Ru species exhibit high activity and stability under dry reforming of methane (DRM) conditions. The LaRu0.01Cr0.99O3 catalyst with very low Ru loading (0.42 wt %) was stable over a 50 h DRM test and the carbon deposition was negligible. The CH4 and CO2 conversions at 750 °C reached 83 and 86%, respectively, approaching the theoretical thermodynamic equilibrium values.

Ni/CeO2 Catalyst Prepared via Microimpinging Stream Reactor with High Catalytic Performance for CO2 Dry Reforming Methane

Methane reforming with carbon dioxide (DRM) is one promising way to achieve carbon neutrality and convert methane to syngas for high-value chemical production. Catalyst development with better performance is the key to its potential large-scale industrial application due to its deactivation caused by carbon deposition and metal sintering. Hence, a Ni/CeO2 catalyst (Ni/CeO2-M) with higher CO2 conversion and better stability is prepared, supported on CeO2 precipitated via a novel microimpinging stream reactor. A series of ex-situ or in-situ characterizations, such as CO titration measurements, two-step transient surface reaction (two-step TSR), CO2 and CH4 temperature-programmed surface reaction (CO2-TPSR and CH4-TPSR), X-ray absorption fine structure (XAFS), and in-situ Raman spectroscopy study, were used to investigate its structure and mechanism. In contrast to Ni supported on commercial CeO2 (Ni/CeO2-C), the Ni/CeO2-M catalyst with stronger lattice oxygen mobility and higher oxygen storage capacity enhances its CO2 activation ability and carbon deposition. The Ni particle size of the Ni/CeO2-M catalyst decreased, and a higher oxidation state was obtained due to the strong metal–support interaction. Besides the reaction performance improvement of the Ni/CeO2-M catalyst, the novel microimpinging stream reactor could achieve catalyst continuous production with a high preparation efficiency. This work provides a novel method for the high-performance catalyst preparation for DRM reaction and its mechanism study gives a deep insight into high-performance catalyst development via bottom-up study.