Photocatalytic CO2 Reduction Coupled with Alcohol Oxidation over Porous Carbon Nitride

Few-Layer Meets Crystalline Structure: Collaborative Efforts for Improving Photocatalytic H2O2 Generation over Carbon Nitride

Although the conversion of O2 and H2O to H2O2 over graphite carbon nitride (g-C3N4) has been realized by means of the photocatalytic process, the catalytic activity of pristine g-C3N4 is still restricted by the rapid charge recombination and inadequate exposure of the active site. In this work, we propose a straightforward strategy to solve these limitations by decreasing the thickness and improving the crystallinity of g-C3N4, resulting in the preparation of few-layered crystalline carbon nitride (FL-CCN). Benefiting from the minimal thickness and highly ordered in-plane triangular cavities within the structure, FL-CCN processes an extended π-conjugated system with a reduced charge transfer resistance and expanded specific surface area. These features accelerate the efficiency of photogenerated charge separation in FL-CCN and contribute to explore of its surface active sites. Consequently, FL-CCN exhibits a significantly improved H2O2 evolution rate (63.95 μmol g-1 h-1), which is 7.8 times higher than that of pristine g-C3N4 (8.15 μmol g-1 h-1), during the photocatalytic conversion of O2 and H2O. This systematic investigation offers valuable insights into the mechanism of photocatalytic H2O2 generation and the development of efficient catalysts.

Modulate the Strong Exciton Effect by Na+ Coordination-Induced Trap States: Efficient Photocatalytic H2O2 Production

Due to the strong Coulomb interaction, in most polymer photocatalysts, electron-hole pairs exist in the form of excitons rather than free charge carriers. The giant excitonic effect is a key obstacle to generating free charge carriers. Therefore, effectively regulating the exciton effect is the first step to achieving optimized carrier separation. Here, we used C-ring/g-C3N4 as the prototypical model system to design a photocatalyst with a Na-coordination-induced trap state. We demonstrate that the excitons can be effectively dissociated into charge carriers by combining with the trap state formed by Na doping sites. Encouragingly, signals from the dissociation of excitons into carriers were observed by ultrafast transient spectroscopy. Benefiting from the enhanced exciton dissociation, Na-C/CN displayed a H2O2 production rate of 17.4 mmol·L-1·h-1 with an apparent quantum efficiency up to 26.9% at 380 nm, which is much higher than many other g-C3N4-based photocatalysts. This work explains the effect of cation doping on the exciton-carrier behavior in polymers. Also, it provides a new way to regulate the exciton effect.

Photo-Induced C1 Substitution Using Methanol as a C1 Source

The development of sustainable and efficient C1 substitution methods is of central interest for organic synthesis and pharmaceuticals production, the methylation motifs bound to a carbon, nitrogen, or oxygen atom widely exist in natural products and top-selling drugs. In the past decades, a number of methods involving green and inexpensive methanol have already been disclosed to replace industrial hazardous and waste-generating C1 source. Among the various efforts, photochemical strategy is considered as a "renewable" alternative that shows great potential to selectively activate methanol to achieve a series of C1 substitutions at mild conditions, typically C/N-methylation, methoxylation, hydroxymethylation, and formylation. Herein the recent advances in selective transformation of methanol to various C1 functional groups via well-designed photochemical systems involving different types of catalysts or not is systematically reviewed. Both the mechanism and corresponding photocatalytic system were discussed and classified on specific methanol activation models. Finally, the major challenges and perspectives are proposed.

Simultaneous photocatalytic biomass conversion and CO2 reduction over high crystalline oxygen-doped carbon nitride

Simultaneous photocatalytic biorefinery and CO2 reduction to co-produce fuels and high value-added chemicals have recently attracted significant attention; however, comprehensive studies are still lacking. Herein, we report the preparation of highly crystalline oxygen-doped carbon nitride nanotubes (O-CNNTs-x) using an ammonium fluoride-assisted hydrothermal/calcination strategy. The hollow structure, high crystallinity, and O incorporation endowed the O-CNNTs-x with photocatalytic activity by considerably improving optical absorption and modulating the charge carrier motion. The lactic acid yield and CO evolution rate over O-CNNTs-2.0 reached 82.08% and 67.95 μmol g-1 h-1, which are 1.57- and 7.37-fold times higher than those of CN, respectively. Moreover, ·OH plays a key role in the oxidation half-reaction. This study offers a facile approach for fabricating highly crystalline element-doped CN with a customizable morphology and electronic properties and demonstrates the viability of co-photocatalytic CO2 reduction and biomass selective oxidation.

External Catalyst- and Additive-Free Photo-Oxidation of Aromatic Alcohols to Carboxylic Acids or Ketones Using Air/O2

We present an environment-friendly and highly efficient method for the oxidation of aromatic alcohols to carboxylic acids or ketones in air via light irradiation under external catalyst-, additive-, and base-free conditions. The photoreaction system exhibits a wide substrate scope and the potential for large-scale applications. Most of the desired products are easily obtained via recrystallization and separation from low-boiling reaction medium acetone in good yields, and the products can be subsequent directly transformed without further purification.

Cu/CuOx@C Composite as a High-Efficiency Electrocatalyst for Oxygen Reduction Reactions

Among clean energy transformation devices, fuel cells have gained special attention over the past years; however, advancing appropriate non-valuable metal impetuses to halfway supplant the customary Pt/C impetus is still in progress. In this paper, we propose a specific electrocatalyst in the formula of highly-active Cu species, associated with coated carbon (Cu@C-800), for oxygen reduction reaction (ORR) through post-treatment of a self-assembled precursor. The optimized catalyst Cu@C-800 showed excellent ORR performance (i.e., the onset potential was 1.00 V vs. RHE, and half-wave potential of 0.81 V vs. RHE), high stability, resistance to methanol, and high four-electron selectivity. The enhancement is attributed to the synergy between the carbon matrix and a high explicit surface region and rich Cu nano-species.

Interfacial Electronic Rearrangement and Synergistic Catalysis for Alkaline Water Splitting in Carbon-Encapsulated Ni (111)/Ni3C (113) Heterostructures

The realization of efficient water electrolysis is still blocked by the requirement for a high and stable driving potential above thermodynamic requirements. An Ni-based electrocatalyst, is a promising alternative for noble-metal-free electrocatalysts but tuning its surface electronic structure and exposing more active sites are the critical challenges to improving its intrinsic catalytic activity. Here, we tackle the challenge by tuning surface electronic structures synergistically with interfacial chemistry and crystal facet engineering, successfully designing and synthesizing the carbon-encapsulated Ni (111)/Ni3C (113) heterojunction electrocatalyst, demonstrating superior hydrogen evolution reaction (HER) activities, good stabilities with a small overpotential of −29 mV at 10 mA/cm2, and a low Tafel slope of 59.96 mV/dec in alkaline surroundings, approximating a commercial Pt/C catalyst and outperforming other reported Ni-based catalysts. The heterostructure electrocatalyst operates at 1.55 V and 1.26 V to reach 10 and 1 mA cm−2 in two-electrode measurements for overall alkaline water splitting, corresponding to 79% and 98% electricity-to-fuel conversion efficiency with respect to the lower heating value of hydrogen.

Tailorable Formation of Hierarchical Structure Silica (HMS) and Its Application in Hydrogen Production

Relentless endeavors have been committed to seeking simple structure-directing agents for synthesizing hierarchical mesoporous silica (HMS) materials but remaining challenges. In this contribution, we offered an improved one-pot hydrothermal route to prepare HMS materials using a single non-ionic triblock copolymer (F127) structure-directing agent under a mild polycarboxylic (citric acid) mediated condition. Via studies of key synthetic parameters including acid concentration, crystallization temperature and aging time, it was found that citric acid medium presents an important bridging effect under the optimal concentration from 0.018 M (pH = 2.57) to 1.82 M (pH = 1.09), contributing to the self-assemblage of partially protonated non-ionic triblock copolymer and tetraethyl orthosilicate (TEOS) into a high-quality multistage structure of silica materials. The specific surface area (SSA) of HMS shows a volcanic trend and is closely associated with the concentration of citric acid while the highest SSA of 739.9 m2/g can be achieved at the citric concentration of 0.28 M. Moreover, the as-synthesized HMS-CTA supported Ni/CeO2 catalysts indicate an excellent production of hydrogen through dry reforming of methane (DRM) reaction over 172 h stability. The improved, facile synthesis strategy under polycarboxylic medium displays an expanded perspective for synthesizing other mesoporous materials in a wide range of applications such as catalytic material carriers and drug inhibitors.