Physicochemical Features and NH3-SCR Catalytic Performance of Natural Zeolite Modified with Iron—The Effect of Fe Loading

Odors Adsorption in Zeolites Including Natural Clinoptilolite: Theoretical and Experimental Studies

This publication presents the results of combined theoretical and experimental research for the potential use of natural clinoptilolite zeolite (CLI) as an odor-adsorbing material. In this study of adsorption capacity, CLI of various granulation was used and its modifications were made by ion exchange using Sn and Fe metals to check whether the presence of metals as potential active centers does not lead to catalytic processes and may lead to enhanced absorption of odorous substances through their adsorption on the created metallic forms. Additionally, in order to increase the specific surface area, modifications were made in the form of hierarchization in an acidic environment using hydrochloric acid to also create the hydrogen form of zeolite and thus also check how the material behaves as an adsorbent. To compare the effect of CLI as a sorption material, synthetic zeolite MFI was also used-as a sodium form and after the introduction of metals (Sn, Fe). The above materials were subjected to adsorption measurements using odorous substances (including acetaldehyde, dimethylamine, pentanoic acid and octanoic acid). Based on the measurements performed, the most advantageous material that traps odorants is a natural material-clinoptilolite. Depending on the faction, its ability varies for different compounds. In the case of acetaldehyde, an effective material is clinoptilolite with a grain size of up to 2 mm. In the case of carboxylic acids, it is material after hierarchization with a fraction of 3-4 mm. In the case of theoretical calculations, information was obtained to show that metallic centers are more stable above oxygen, which is associated with the skeletal aluminum in clinoptilolite.

Mechanisms for deNOx and deN2O Processes on FAU Zeolite with a Bimetallic Cu-Fe Dimer in the Presence of a Hydroxyl Group-DFT Theoretical Calculations

In this paper, a detailed mechanism is discussed for two processes: deNOx and deN2O. An FAU catalyst was used for the reaction with Cu-Fe bimetallic adsorbates represented by a dimer with bridged oxygen. Partial hydration of the metal centres in the dimer was considered. Ab initio calculations based on the density functional theory were used. The electron parameters of the structures obtained were also analysed. Visualisation of the orbitals of selected structures and their interpretations are presented. The presented research allowed a closer look at the mechanisms of processes that are very common in the automotive and chemical industries. Based on theoretical modelling, it was possible to propose the most efficient catalyst that could find potential application in industry-this is the FAU catalyst with a Cu-O-Fe bimetallic dimer with a hydrated copper centre. The essential result of our research is the improvement in the energetics of the reaction mechanism by the presence of an OH group, which will influence the way NO and NH3 molecules react with each other in the deNOx process depending on the industrial conditions of the process. Our theoretical results suggest also how to proceed with the dosage of NO and N2O during the industrial process to increase the desired reaction effect.

Zeolite Properties, Methods of Synthesis, and Selected Applications

Zeolites, a group of minerals with unique properties, have been known for more than 250 years. However, it was the development of methods for hydrothermal synthesis of zeolites and their large-scale industrial applications (oil processing, agriculture, production of detergents and building materials, water treatment processes, etc.) that made them one of the most important materials of the 20th century, with great practical and research significance. The orderly, homogeneous crystalline and porous structure of zeolites, their susceptibility to various modifications, and their useful physicochemical properties contribute to the continuous expansion of their practical applications in both large-volume processes (ion exchange, adsorption, separation of mixture components, catalysis) and specialized ones (sensors). The following review of the knowledge available in the literature on zeolites aims to present the most important information on the properties, synthesis methods, and selected applications of this group of aluminosilicates. Special attention is given to the use of zeolites in agriculture and environmental protection.

Applied Catalysis in Chemical Industry: Synthesis, Catalyst Design, and Evaluation

Catalysis is a very important process with practical significance for sustainable development, energy production, environmental protection, food production, and water purification, among others, and catalytic processes produce almost 90% of the products in the chemical industry [...]

Hydrotalcite-Modified Clinoptilolite as the Catalyst for Selective Catalytic Reduction of NO with Ammonia (NH3-SCR)

A series of clinoptilolite-supported catalysts, modified with hydrotalcite-like phase (HT) by co-precipitation, were prepared and tested in NH₃-SCR reactions. It was found that deposition of HT on clinoptilolite increased conversion of NO within 250-450 °C, and that the positive impact on the catalytic activity was independent of HT loading. The promoting effect of clinoptilolite was attributed to Brönsted acid sites present in the zeolite, which facilitated adsorption and accumulation of ammonia during the catalytic process. Concentration of N₂O in the post-reaction gas mixture reached its maximum at 300 °C and the by-product was most likely formed as a consequence of NH₄NO₃ decomposition or side reaction of NH₃ oxidation in the high-temperature region. The gradual elimination of nitrous oxide, noticed as the material with the highest concentration of hydrotalcite phase, was attributed to the abundance of oligomeric iron species and the superior textural parameters of the material. UV-Vis experiments performed on the calcined samples indicated that Fe sites of higher nuclearity were generated by thermal decomposition of the hydrotalcite phase during the catalytic reaction. Therefore, calcination of the materials prior to the catalytic tests was not required to obtain satisfactory overall catalytic performance in NO reductions.