Solar Energy-Driven Reverse Water Gas Shift Reaction: Photothermal Effect, Photoelectric Activation and Selectivity Regulation

Excessive carbon dioxide (CO2) emissions are one of the main causes of the greenhouse effect. Thermal catalytic reverse water gas shift (RWGS) reaction, which is a pre reaction for Fischer-Tropsch synthesis, is considered an effective way to convert CO2 and synthesize high value-added chemicals in industry. However, traditional thermal catalysis requires a large amount of fossil fuels to drive reactions, which cannot achieve the true goal of carbon neutrality. Photothermal catalysis, as a novel conversion pathway, can achieve efficient CO2 conversion while significantly improving solar energy utilization. This review provides a detailed introduction of CO2 and H2 adsorption/activation and reaction pathways in thermal catalysis, as well as the catalytic mechanisms of thermal and chemical effects in photothermal catalytic RWGS to supply readers valuable insights on the mechanism of photothermal catalytic RWGS reaction and provide a reference for better catalyst design.

Recent Advances in Hydrogenation of CO2 to CO with Heterogeneous Catalysts Through the RWGS Reaction

With the continuous increase in CO2 emissions, primarily from the combustion of coal and oil, the ecosystem faces a significant threat. Therefore, as an effective method to minimize the issue, the Reverse Water Gas Shift (RWGS) reaction which converts CO2 towards CO attracts much attention, is an environmentally-friendly method to mitigate climate change and lessen dependence on fossil fuels. Nevertheless, the inherent thermodynamic stability and kinetic inertness of CO2 is a big challenge under mild conditions. In addition, it remains another fundamental challenge in RWGS reaction owing to CO selectivity issue caused by CO2 further hydrogenation towards CH4 . Up till now, a series of catalysis systems have been developed for CO2 reduction reaction to produce CO. Herein, the research progress of the well-performed heterogeneous catalysts for the RWGS reaction were summarized, including the catalyst design, catalytic performance and reaction mechanism. This review will provide insights into efficient utilization of CO2 and promote the development of RWGS reaction.

Migration and aggregation of Pt atoms on metal oxide-supported ceria nanodomes control reverse water gas shift reaction activity

Single-atom catalysts (SACs) are particularly sensitive to external conditions, complicating the identification of catalytically active species and active sites under in situ or operando conditions. We developed a methodology for tracing the structural evolution of SACs to nanoparticles, identifying the active species and their link to the catalytic activity for the reverse water gas shift (RWGS) reaction. The new method is illustrated by studying structure-activity relationships in two materials containing Pt SACs on ceria nanodomes, supported on either ceria or titania. These materials exhibited distinctly different activities for CO production. Multimodal operando characterization attributed the enhanced activity of the titania-supported catalysts at temperatures below 320 ˚C to the formation of unique Pt sites at the ceria-titania interface capable of forming Pt nanoparticles, the active species for the RWGS reaction. Migration of Pt nanoparticles to titania support was found to be responsible for the deactivation of titania-supported catalysts at elevated temperatures. Tracking the migration of Pt atoms provides a new opportunity to investigate the activation and deactivation of Pt SACs for the RWGS reaction.

Recent Advances in the Reverse Water-Gas Conversion Reaction

The increase in carbon dioxide emissions has significantly impacted human society and the global environment. As carbon dioxide is the most abundant and cheap C1 resource, the conversion and utilization of carbon dioxide have received extensive attention from researchers. Among the many carbon dioxide conversion and utilization methods, the reverse water-gas conversion (RWGS) reaction is considered one of the most effective. This review discusses the research progress made in RWGS with various heterogeneous metal catalyst types, covering topics such as catalyst performance, thermodynamic analysis, kinetics and reaction mechanisms, and catalyst design and preparation, and suggests future research on RWGS heterogeneous catalysts.

Sub-Millisecond Laser-Irradiation-Mediated Surface Restructure Boosts the CO Production Yield of Cobalt Oxide Supported Pd Nanoparticles

The catalytic conversion of CO₂ into valuable commodities has the potential to balance ongoing energy and environmental issues. To this end, the reverse water-gas shift (RWGS) reaction is a key process that converts CO₂ into CO for various industrial processes. However, the competitive CO₂ methanation reaction severely limits the CO production yield; therefore, a highly CO-selective catalyst is needed. To address this issue, we have developed a bimetallic nanocatalyst comprising Pd nanoparticles on the cobalt oxide support (denoted as CoPd) via a wet chemical reduction method. Furthermore, the as-prepared CoPd nanocatalyst was exposed to sub-millisecond laser irradiation with per-pulse energies of 1 mJ (denoted as CoPd-1) and 10 mJ (denoted as CoPd-10) for a fixed duration of 10 s to optimize the catalytic activity and selectivity. For the optimum case, the CoPd-10 nanocatalyst exhibited the highest CO production yield of ∼1667 μmol g^-1_catalyst, with a CO selectivity of ∼88% at a temperature of 573 K, which is a 41% improvement over pristine CoPd (~976 μmol g^-1_catalyst). The in-depth analysis of structural characterizations along with gas chromatography (GC) and electrochemical analysis suggested that such a high catalytic activity and selectivity of the CoPd-10 nanocatalyst originated from the sub-millisecond laser-irradiation-assisted facile surface restructure of cobalt oxide supported Pd nanoparticles, where atomic CoOx species were observed in the defect sites of the Pd nanoparticles. Such an atomic manipulation led to the formation of heteroatomic reaction sites, where atomic CoOx species and adjacent Pd domains, respectively, promoted the CO₂ activation and H₂ splitting steps. In addition, the cobalt oxide support helped to donate electrons to Pd, thereby enhancing its ability of H₂ splitting. These results provide a strong foundation to use sub-millisecond laser irradiation for catalytic applications.

Carbon Dioxide Conversion on Supported Metal Nanoparticles: A Brief Review

The increasing concentration of anthropogenic CO2 in the air is one of the main causes of global warming. The Paris Agreement at COP 21 aims to reach the global peak of greenhouse gas emissions in the second half of this century, with CO2 conversion towards valuable added compounds being one of the main strategies, especially in the field of heterogeneous catalysis. In the current search for new catalysts, the deposition of metallic nanoparticles (NPs) supported on metal oxides and metal carbide surfaces paves the way to new catalytic solutions. This review provides a comprehensive description and analysis of the relevant literature on the utilization of metal-supported NPs as catalysts for CO2 conversion to useful chemicals and propose that the next catalysts generation can be led by single-metal-atom deposition, since in general, small metal particles enhance the catalytic activity. Among the range of potential indicators of catalytic activity and selectivity, the relevance of NPs’ size, the strong metal–support interactions, and the formation of vacancies on the support are exhaustively discussed from experimental and computational perspective.

MOF-Derived CeO2 and CeZrOx Solid Solutions: Exploring Ce Reduction through FTIR and NEXAFS Spectroscopy

The development of Ce-based materials is directly dependent on the catalyst surface defects, which is caused by the calcination steps required to increase structural stability. At the same time, the evaluation of cerium's redox properties under reaction conditions is of increasing relevant importance. The synthesis of Ce-UiO-66 and CeZr-UiO-66 and their subsequent calcination are presented here as a simple and inexpensive approach for achieving homogeneous and stable CeO₂ and CeZrO_x nanocrystals. The resulting materials constitute an ideal case study to thoroughly understand cerium redox properties. The Ce³⁺/Ce⁴⁺ redox properties are investigated by H₂-TPR experiments exploited by in situ FT-IR and Ce M₅-edge AP-NEXAFS spectroscopy. In the latter case, Ce³⁺ formation is quantified using the MCR-ALS protocol. FT-IR is then presented as a high potential/easily accessible technique for extracting valuable information about the cerium oxidation state under operating conditions. The dependence of the OH stretching vibration frequency on temperature and Ce reduction is described, providing a novel tool for qualitative monitoring of surface oxygen vacancy formation. Based on the reported results, the molecular absorption coefficient of the Ce³⁺ characteristic IR transition is tentatively evaluated, thus providing a basis for future Ce³⁺ quantification through FT-IR spectroscopy. Finally, the FT-IR limitations for Ce³⁺ quantification are discussed.

Enhanced sustainable integration of CO2 utilization and wastewater treatment using microalgae in circular economy concept

Microalgae have been shown to have a promising potential for CO₂ utilization and wastewater treatment which still faces the challenges of high resource and energy requirements. The implementation of the circular economy concept is able to address the issues that limit the application of microalgae-based technologies. In this review, a comprehensive discussion on microalgae-based CO₂ utilization and wastewater treatment was provided, and the integration of this technology with the circular economy concept, for long-term economic and environmental benefits, was described. Furthermore, technological challenges and feasible strategies towards the improvement of microalgae cultivation were discussed. Finally, necessary regulations and effective policies favoring the implementation of microalgae cultivation into the circular economy were proposed. These are discussed to support sustainable development of microalgae-based bioremediation and bioproduction. This work provides new insights into the implementation of the circular economy concept into microalgae-based CO₂ utilization and wastewater treatment to enhance sustainable production.

CeFeO3-CeO2-Fe2O3 Systems: Synthesis by Solution Combustion Method and Catalytic Performance in CO2 Hydrogenation

Rare-earth orthoferrites have found wide application in thermocatalytic reduction-oxidation processes. Much less attention has been paid, however, to the production of CeFeO₃, as well as to the study of its physicochemical and catalytic properties, in particular, in the promising process of CO₂ utilization by hydrogenation to CO and hydrocarbons. This study presents the results of a study on the synthesis of CeFeO₃ by solution combustion synthesis (SCS) using various fuels, fuel-to-oxidizer ratios, and additives. The SCS products were characterized by XRD, FTIR, N₂-physisorption, SEM, DTA-TGA, and H₂-TPR. It has been established that glycine provides the best yield of CeFeO₃, while the addition of NH₄NO₃ promotes an increase in the amount of CeFeO₃ by 7-12 wt%. In addition, the synthesis of CeFeO₃ with the participation of NH₄NO₃ makes it possible to surpass the activity of the CeO₂-Fe₂O₃ system at low temperatures (300-400 °C), as well as to increase selectivity to hydrocarbons. The observed effects are due to the increased gas evolution and ejection of reactive FeO_x nanoparticles on the surface of crystallites, and an increase in the surface defects. CeFeO₃ obtained in this study allows for achieving higher CO₂ conversion compared to LaFeO₃ at 600 °C.