How to Determine the Core-Shell Nature in Bimetallic Catalyst Particles?

Ameliorative and Neuroprotective Effect of Core-Shell Type Se@Au Conjugated Hesperidin Nanoparticles in Diabetes-Induced Cognitive Impairment

Diabetes mellitus is the most chronic metabolic ailment characterized by insulin deficiency leading to aberrant cognitive dysfunction in later stages. Hesperidin is a bioflavonoid, having different pharmacological activities, but its poor water solubility and short plasma half-life restrict its applications in the clinical field. So, the hesperidin was conjugated with gold, selenium, and core-shell bimetallic nanoparticles of gold and selenium. Different spectroscopic methods characterized the synthesized monometallic and bimetallic nanoparticles. The rats were injected with streptozotocin to induce cognitive dysfunction, followed by administering HSP, HSP-Au NPs, HSP-Se NPs, and Se@Au-HSP NPs daily for 21 days. Then, the neurobehavioral studies, oxidative stress parameters, AChE and nitrite levels, the content of amyloid-β42, and inflammatory mediators were accessed to evaluate the effect of the nanoparticles against the STZ rat model. The results showed a significant increase in oxidative stress, AChE activity, amyloid-β42, nitrite levels, and neuroinflammation by upregulating the inflammatory cytokines in the streptozotocin-administered rat brain. The HSP, HSP-Au NPs, HSP-Se NPs, and Se@Au-HSP NPs effectively reversed all these effects of streptozotocin. However, the bimetallic nanoparticle Se@Au-HSP NPs revealed better neuroprotective action than HSP-Au NPs and HSP-Se NPs. Hesperidin-conjugated bimetallic nanoparticles improved learning and memory in the STZ rat model and may be an alternative approach for neurodegenerative diseases, including Alzheimer's disease.

Optical properties of synthesized Au/Ag Nanoparticles using 532 nm and 1064 nm pulsed laser ablation: effect of solution concentration

The primary objective of this experimental research is to introduce the capacity of laser irradiation into the synthesis of bimetallic nanoparticles from noble metals. Gold and silver nanoparticles are produced through the laser ablating gold and silver targets in distilled water. Originally, the samples are synthesized by using Nd:YAG laser with 1064 nm wavelength and 7 ns pulse width. Following this, solutions mixed with different volumetric ratios, are irradiated by the second harmonic of the said laser at 532 nm wavelength. The absorption peak of gold nanoparticles around 530 nm, is used to transfer the laser energy to nanoparticles and synthesize Au/Ag bimetallic nanoparticles. The wavelength and volumetric ratio of solutions are the experiment's variables. The bimetallic nanoparticles are characterized as follows: X-ray diffraction pattern, spectroscopy in the range of UV–Vis-NIR and IR, Photoluminescence spectrum, Dynamic light scattering, and Fourier transform infrared spectroscopy. Additionally, FE-SEM and TEM images are used to study the size and morphology of nanoparticles. One of the aims of the research is to investigate the effects of laser wavelength and different volumetric concentrations on the optical properties of Au/Ag bimetallic nanoparticles. On the other hand, the study revealed that silver concentration and laser wavelength in the synthesis of Au/Ag bimetallic nanoparticles with different structures, cause the formation of crystalline structure, growth of grain size, and therefore silver oxide reduction.

da Silva VA, S. da Silva GF, Santos ECS, de S. Baêta E, Brant de Campos J, Carvalho NMF, Malta LFB, Senra JD. Mild and Rapid Light-Driven Suzuki-Miyaura Reactions Catalyzed by AuPd Nanoparticles in Water at Room Temperature

Organic reactions carried out in water under mild conditions are state-of-the-art in terms of environmentally benign chemical processes. In this direction, plasmonic catalysis can aid in accomplishing such tasks. In the present work, cyclodextrin-mediated AuPd bimetallic nanoparticles (NPs) were applied in room-temperature aqueous Suzuki-Miyaura reactions aiming at preparing biaryl products based on fluorene, isatin, benzimidazole and resorcinol, with yields of 77 % up to 95 %. AuPd NPs were revealed to be a physical mixture of Au and Pd particles circa 20 and 2 nm, respectively, through X-ray diffraction, dynamic light scattering, UV-Vis spectroscopy and transmission electron microscopy analyses.

The Effect of Magnetic Field on Catalytic Properties in Core-Shell Type Particles

Magnetic field effects can provide a handle on steering chemical reactions and manipulating yields. The presence of a magnetic field can influence the energy levels of the active species by interacting with their spin states. Here we demonstrate the effect of a magnetic field on the electrocatalytic processes taking place on platinum-based nanoparticles in fuel cell conditions. We have identified a shift in the potentials representing hydrogen adsorption and desorption, present in all measurements recorded in the presence of a magnetic field. We argue that the changes in electrochemical behavior are a result of the interactions between the magnetic field and the unpaired spin states of hydrogen.

Tailored Engineering of Bimetallic Plasmonic Au@Ag Core@Shell Nanoparticles

A distinctive synthetic method for the efficient synthesis of multifunctional bimetallic plasmonic Au@Ag core@shell nanoparticles (NPs) with tunable size, morphology, and localized surface plasmon resonance (LSPR) using Triton X-100/hexanol-1/deionized water/cyclohexane-based water-in-oil (W/O) microemulsion (ME) is described. The W/O ME acted as a "true nanoreactor" for the synthesis of Au@Ag core@shell NPs by providing a confined and controlled environment and suppressing the nucleation, growth, agglomeration, and aggregation of the NPs. High-resolution transmission electron microscopic analysis of the synthesized Au@Ag core@shell NPs revealed an "unusual core@shell" contrast, and the selected area electron diffraction and Moiré patterns showed that Au layers are paralleled to Ag layers, thus indicating the formation of Au@Ag core@shell NPs. Interestingly, the UV-visible spectrum of the Au@Ag core@shell NPs exhibited enthralling plasmonic properties by introducing a high-frequency quadrupolar LSPR mode originated from the isolated Au@Ag NPs along with a low-frequency dipolar LSPR mode originated from the coupled Au@Ag NPs. The effective plasmonic enhancement of the Au@Ag core@shell NPs is attributed to the extreme enhancement of the localized electromagnetic field by coupling of the localized surface plasmons of the Au core and Ag shell. The mechanisms for the nucleation and growth of Au@Ag core@shell NPs in W/O ME have been proposed. A unique electron transfer phenomenon between the Au core and Ag shell is elucidated for better understanding and manipulation of the electronic properties, which evinced the development of Au@Ag core@shell NPs through suppression of the galvanic replacement reaction.

Hydroconversion of Aromatic Hydrocarbons over Bimetallic Catalysts

Bimetallic catalysts (BMC) for hydroconversion of aromatic hydrocarbons (ArH) have been designed by modification of Ni/Al2O3 with chromium(0) compounds and phosphoromolybdic heteropolyacid (HPA). Catalysts were tested in hydrogenation of benzene and toluene, in hydrodemethylation of pure toluene and they were shown to possess a high activity, selectivity and sulfur tolerance under conditions of the processes above. The activity of BMC in these processes was much higher as compared with that of two-component (Ni-Cr, Ni-HPA) or conventional Ni/Al2O3 catalysts. Using BMC, hydrogenation of benzene and toluene proceeds with activity increased (up to 34–38 mol/kg·h) and toluene hydrodemethylation may be performed with improved selectivity (90.3%) and benzene yield (81%). The high sulfur tolerance of BMC was demonstrated by performing hydrodemethylation of toluene containing up to 500 ppm S.

The effect of lattice strain on catalytic activity

We report on the effect of lattice strain in three different types of core–shell electrocatalyst particles on their catalytic activity towards the oxygen reduction reaction.

How to Study the Uptake and Toxicity of Nanoparticles in Cultured Brain Cells: The Dos and Don't Forgets

Due to their exciting properties, engineered nanoparticles have obtained substantial attention over the last two decades. As many types of nanoparticles are already used for technical and biomedical applications, the chances that cells in the brain will encounter nanoparticles have strongly increased. To test for potential consequences of an exposure of brain cells to engineered nanoparticles, cell culture models for different types of neural cells are frequently used. In this review article we will discuss experimental strategies and important controls that should be used to investigate the physicochemical properties of nanoparticles for the cell incubation conditions applied as well as for studies on the biocompatibility and the cellular uptake of nanoparticles in neural cells. The main focus of this article will be the interaction of cultured neural cells with iron oxide nanoparticles, but similar considerations are important for studying the consequences of an exposure of other types of cultured cells with other types of nanoparticles. Our article aims to improve the understanding of the special technical challenges of working with nanoparticles on cultured neural cells, to identify potential artifacts and to prevent misinterpretation of data on the potential adverse or beneficial consequences of a treatment of cultured cells with nanoparticles.

Pt@Ag and Pd@Ag core/shell nanoparticles for catalytic degradation of Congo red in aqueous solution

Platinum/silver (Pt@Ag) and palladium/silver (Pd@Ag) core/shell NPs have been synthesized in two steps reaction using the citrate method. The progress of nanoparticle formation was followed by the UV/Vis spectroscopy. Transmission electron microscopy revealed spherical shaped core/shell nanoparticles with average particle diameter 32.17nm for Pt@Ag and 8.8nm for Pd@Ag. The core/shell NPs were further characterized by FT-IR and XRD. Reductive degradation of the Congo red dye was chosen to demonstrate the excellent catalytic activity of these core/shell nanostructures. The nanocatalysts act as electron mediators for the transfer of electrons from the reducing agent (NaBH₄) to the dye molecules. Effect of reaction parameters such as nanocatalyst dose, dye and NaBH₄ concentrations on the dye degradation was investigated. A comparison between the catalytic activities of both nanocatalysts was made to realize which of them the best in catalytic performance. Pd@Ag was the higher in catalytic activity over Pt@Ag. Such greater activity is originated from the smaller particle size and larger surface area. Pd@Ag nanocatalyst was catalytically stable through four subsequent reaction runs under the utilized reaction conditions. These findings can thus be considered as possible economical alternative for environmental safety against water pollution by dyes.

Tuning the structure and magnetic behavior of Ni–Ir-based nanoparticles in ionic liquids

We report on a simple preparation of extremely small diameter (ca. 2 nm) Ni–Ir-based NPs with either core–shell like or alloy-like microstructures.

Inherently-Forced Tensile Strain in Nanodiamond-Derived Onion-like Carbon: Consequences in Defect-Induced Electrochemical Activation

We analyzed the nanodiamond-derived onion-like carbon (OLC) as function of synthesis temperature (1000~1400 °C), by high-resolution electron microscopy, electron energy loss spectroscopy, visible-Raman spectroscopy, ultraviolet photoemission spectroscopy, impedance spectroscopy, cyclic voltammetry and differential pulse voltammetry. The temperature dependences of the obtained properties (averaged particle size, tensile strain, defect density, density of states, electron transfer kinetics, and electrochemical oxidation current) unanimously coincided: they initially increased and saturated at 1200 °C. It was attributed to the inherent tensile strains arising from (1) the volume expansion associated with the layer-wise diamond-to-graphite transformation of the core, which caused forced dilation of the outer shells during their thermal synthesis; (2) the extreme curvature of the shells. The former origin was dominant over the latter at the outermost shell, of which the relevant evolution in defect density, DOS and electron transfer kinetics determined the electrochemical performances. In detection of dopamine (DA), uric acid (UA) and ascorbic acid (AA) using the OLC as electrode, their oxidation peak currents were enhanced by factors of 15~60 with annealing temperature. Their limit of detection and the linear range of detection, in the post-treatment-free condition, were as excellent as those of the nano-carbon electrodes post-treated by Pt-decoration, N-doping, plasma, or polymer.

Facile controllable hydrothermal route for a porous CoMn2O4 nanostructure: synthesis, characterization, and textile dye removal from aqueous media

We herein report the synthesis of a pure sphere-like spinel CoMn₂O₄ nanostructure using a facile and surfactant-free hydrothermal approach followed by a thermal decomposition of the as-prepared CoCO₃/MnCO₃ composite precursor.