Surface Reduced CeO2 Nanowires for Direct Conversion of CO2 and Methanol to Dimethyl Carbonate: Catalytic Performance and Role of Oxygen Vacancy

Product Yield Increasing More Than 20 Times Achieved by Reducing Water Poisoning for Direct Diethyl Carbonate Synthesis

Diethyl carbonate (DEC) synthesis from CO2 and ethanol is a typical green chemical route for sustainable development and cleaner production. However, the bottleneck problem of a low DEC yield is still not solved at present. The DEC yield still maintains 0.5-5.0% unless expensive third additives are added. Compared to the cheap price of DEC, the third additives are generally more expensive. It is not advisible to use expensive chemicals to prepare cheap chemicals. In this work, the (ZrO2)1.0/(Fe2O3)1.0 catalyst was prepared by a novel template-precipitation method and the DEC yield of the DEC direct synthetic reaction only from CO2 and ethanol without third additives obtained 1.95%. After a series of supported catalysts were prepared, the DEC yield reached up to 46.1% for the (ZrO2)1.0/(Fe2O3)1.0@3A-CaO-CaC2 catalyst. This carrier can also be applied to other catalyst systems. CO2-TPD, NH3-TPD, and XRD were measured to analyze the microstructure and catalytic mechanism. Active center site theory was proposed to explain the intrinsic mechanism of catalyst activity. This new discovery of the mechanism and the DEC yield removed obstacles for the application of this reaction.

Ultrasonically assisted surface modified CeO2 nanospindle catalysts for conversion of CO2 and methanol to DMC

This study developed a facile and effective approach to engineer the surface properties of cerium oxide (CeO2) nanospindle catalysts for the direct synthesis of dimethyl carbonate (DMC) from CO2 and methanol. CeO2 nanospindles were first prepared by a simple precipitation method followed by wet chemical redox etching with sodium borohydride (NaBH4) under high intensity ultrasonication (ultrasonic horn, 20 kHz, 150 W/cm2). The ultrasonically assisted surface modification of the CeO2 nanospindles in NaBH4 led to particle collisions and surface reduction that resulted in an increase in the number of surface-active sites of exposed Ce3+ and oxygen vacancies. The surface modified CeO2 nanospindles showed an improvement of catalytic activity for DMC formation, yielding 17.90 mmol·gcat-1 with 100 % DMC selectivity. This study offers a simple and effective method to modify a CeO2 surface, and it can further be applied for other chemical activities.

Process Intensification of Methane Production via Catalytic Hydrogenation in the Presence of Ni-CeO2/Cr2O3 Using a Micro-Channel Reactor

A slight amount of Cr2O3 segregation in 40 wt% NiO/Ce0.5Cr0.5O2 was presented at the surface. The best catalytic performance towards the reaction was achieved at 74% of CO2 conversion and 100% CH4 selectivity at 310 °C, the reactant (H2/CO2) feed molar ratio was 4, and the WHSV was 56,500 mlN·h−1·g−1cat. The mechanistic pathway was proposed through carbonates and formates as a mediator during CO2 and H2 interaction. Activation energy was estimated at 4.85 kJ/mol, when the orders of the reaction were ranging from 0.33 to 1.07 for nth-order, and 0.40 to 0.53 for mth-order.

CeO2-x quantum dots with massive oxygen vacancies as efficient catalysts for the synthesis of dimethyl carbonate

CeO2-x quantum dots with massive oxygen vacancies are obtained by a one-step single molecular synthesis strategy. The yield of dimethyl carbonate from CO2 and methanol is more than 5 times that for commercial CeO2 nanoparticles.

Monolithic ZnxCe1−xO2 catalysts for catalytic synthesis of dimethyl carbonate from CO2 and methanol

The schematic diagram of reactor module comprised of honeycomb ceramic monolith with the catalysts for the synthesis of DMC.

Nanomaterials for Environmental Purification and Energy Conversion

Nanomaterials, engineered structures of which a single unit is sized (in at least one dimension) between 1 to 100 nm, are probably the fastest growing market in the world [...]

Effect of Alkali-Doping on the Performance of Diatomite Supported Cu-Ni Bimetal Catalysts for Direct Synthesis of Dimethyl Carbonate

Alkali-adopted Cu-Ni/diatomite catalysts were designed and used for the direct synthesis of dimethyl carbonate (DMC) from carbon dioxide and methanol. Alkali additives were introduced into Cu-Ni/diatomite catalyst as a promoter because of its lower work function (Ni > Cu > Li > Na > K > Cs) and stronger electron-donating ability. A series of alkali-promoted Cu-Ni/diatomite catalysts were prepared by wetness impregnation method with different kind and different loading of alkali. The synthesized catalysts were fully characterized by means of X-ray diffraction (XRD), scanning electron microscope (SEM), temperature-programmed reduction (TPR), and NH3/CO2-TPD. The experimental results demonstrated that alkali adoption can significantly promote the catalytic activity of Cu–Ni bimetallic catalysts. Under the catalytic reaction conditions of 120 °C and 1.0 MPa; the highest CH3OH conversion of 9.22% with DMC selectivity of 85.9% has been achieved when using 15%(2Cu-Ni) 2%Cs2O/diatomite catalyst (CuO + NiO = 15 wt. %, atomic ratio of Cu/Ni = 2/1, Cs2O = 2 wt. %).