Morphologically Tunable MnO2 Nanoparticles Fabrication, Modelling and Their Influences on Electrochemical Sensing Performance toward Dopamine

Covalent organic frameworks (COFs) as carrier for improved drug delivery and biosensing applications

Porous organic frameworks (POFs) represent a significant subclass of nanoporous materials in the field of materials science, offering exceptional characteristics for advanced applications. Covalent organic frameworks (COFs), as a novel and intriguing type of porous material, have garnered considerable attention due to their unique design capabilities, diverse nature, and wide-ranging applications. The unique structural features of COFs, such as high surface area, tuneable pore size, and chemical stability, render them highly attractive for various applications, including targeted and controlled drug release, as well as improving the sensitivity and selectivity of electrochemical biosensors. Therefore, it is crucial to comprehend the methods employed in creating COFs with specific properties that can be effectively utilized in biomedical applications. To address this indispensable fact, this review paper commences with a concise summary of the different methods and classifications utilized in synthesizing COFs. Second, it highlights the recent advancements in COFs for drug delivery, including drug carriers as well as the classification of drug delivery systems and biosensing, encompassing drugs, biomacromolecules, small biomolecules and the detection of biomarkers. While exploring the potential of COFs in the biomedical field, it is important to acknowledge the limitations that researchers may encounter, which could impact the practicality of their applications. Third, this paper concludes with a thought-provoking discussion that thoroughly addresses the challenges and opportunities associated with leveraging COFs for biomedical applications. This review paper aims to contribute to the scientific community's understanding of the immense potential of COFs in improving drug delivery systems and enhancing the performance of biosensors in biomedical applications.

Three-dimensional dual-network magnetic conductive hydrogel for the highly sensitive electrochemical detection of ponceau 4R in foods

Synthetic pigment Ponceau 4 R is a commonly used additive in the process of various foods. Due to its potential toxicity to humans, realizing high sensitivity and rapid detection of Ponceau 4 R is extremely important. In this study, we synthesized a novel dual-network magnetic conductive hydrogel (MCHG) via a simple one-pot low temperature stirring method. In MCHG, cationic guar gum (CGG) and β-cyclodextrin (β-CD) formed a primary three-dimensional network cross-linked by N, N-methylene bisacrylamide. A second network was formed in MCHG by CGG, β-CD and magnetite@carboxylate-terminated carbon nanotubes (Fe3O4@COOH-MWCNTs) through hydrogen bonding and electrostatic interactions. Fe3O4@COOH-MWCNTs enhanced cross-linking in the MCHG hydrogel, whilst also boosting the equilibrium adsorption capacity of Ponceau 4 R (61.8 mg g-1), electrical conductivity and electrocatalytic performance. Application of MCHG to a glassy carbon electrode (GCE) created a highly sensitive electrochemical sensor for the detection of Ponceau 4 R. Under optimized testing conditions, the sensor offered a very wide linear range (0.01-200.0 μM) and a low limit of detection (1.8 nM) for Ponceau 4 R. When the sensor was applied to the detection of Ponceau 4 R in spiked honey and liqueur samples, excellent recoveries were achieved (88.2%-107.0%). Furthermore, analyses of commercial biscuit and candy samples using the MCHG/GCE sensor and a national standard ultraviolet spectrophotometry method afforded identical results. Results demonstrate that multifunctional hydrogels show great promise as signal amplification agents in electrochemical detection of target compounds in foods.

Fast and Ultrasensitive Electrochemical Detection for Antiviral Drug Tenofovir Disoproxil Fumarate in Biological Matrices

Tenofovir disoproxil fumarate (TDF) is an antiretroviral medication with significant curative effects, so its quantitative detection is important for human health. At present, there are few studies on the detection of TDF by electrochemical sensors. This work can be a supplement to the electrochemical detection of TDF. Moreover, bare electrodes are susceptible to pollution, and have high overvoltage and low sensitivity, so it is crucial to find a suitable electrode material. In this work, zirconium oxide (ZrO2) that has a certain selectivity to phosphoric acid groups was synthesized by a hydrothermal method with zirconyl chloride octahydrate as the precursor. A composite modified glassy carbon electrode for zirconium oxide-chitosan-multiwalled carbon nanotubes (ZrO2-CS-MWCNTs/GCE) was used for the first time to detect the TDF, and achieved rapid, sensitive detection of TDF with a detection limit of sub-micron content. The ZrO2-CS-MWCNTs composite was created using sonication of a mixture of ZrO2 and CS-MWCNTs solution. The composite was characterized using scanning electron microscopy (SEM) and cyclic voltammetry (CV). Electrochemical analysis was performed using differential pulse voltammetry (DPV). Compared with single-material electrodes, the ZrO2-CS-MWCNTs/GCE significantly improves the electrochemical sensing of TDF due to the synergistic effect of the composite. Under optimal conditions, the proposed method has achieved good results in linear range (0.3~30 μM; 30~100 μM) and detection limit (0.0625 μM). Moreover, the sensor has the merits of simple preparation, good reproducibility and good repeatability. The ZrO2-CS-MWCNTs/GCE has been applied to the determination of TDF in serum and urine, and it may be helpful for potential applications of other substances with similar structures.

Gold Nanomaterials and their Composites as Electrochemical Sensing Platforms for Nitrite Detection

Nitrite is one of the abundant toxic components existing in the environment and is likely to have a great potential to affect human health badly. For that reason, it has become crucial to build a reliable nitrite detection method. In recent years, several nitrite monitoring systems have been proposed. Compared with traditional analytical strategies, the electrochemical approach has a bunch of advantages, including low cost, rapid response, easy operation, simplicity, etc. In this case, noble metal nanomaterials, especially Au-based nanomaterials, have attracted attention in electrode modification because of higher catalytic activity, facile mass transfer, and broad active area for determining nitrite. This review is based on the state-of-the-art, which includes a variety of nanomaterials that have been coupled with AuNPs for the creation of nanocomposites, and the construction as well as development of electrochemical sensors for nitrite detection over the last few years (2016-2022). A background study on synthesizing different morphological AuNPs and nanocomposites has also been introduced. The fabrication methods and sensing capabilities of modified electrodes are given special consideration.

An Electrochemical Sensor Based on a Nitrogen-Doped Carbon Material and PEI Composites for Sensitive Detection of 4-Nitrophenol

A glassy carbon electrode (GCE) was modified with nitrogen-doped carbon materials (NC) and polyethyleneimine (PEI) composites to design an electrochemical sensor for detecting 4-nitrophenol (4-NP). The NC materials were prepared by a simple and economical method through the condensation and carbonization of formamide. The NC materials were dispersed in a polyethyleneimine (PEI) solution easily. Due to the excellent properties of NC and PEI as well as their synergistic effect, the electrochemical reduction of the 4-NP on the surface of the NC-PEI composite modified electrode was effectively enhanced. Under the optimized conditions, at 0.06-10 μM and 10-100 μM concentration ranges, the NC-PEI/GCE sensor shows a linear response to 4-NP, and the detection limit is 0.01 μM (the signal-to-noise ratio is three). The reliability of the sensor for the detection of 4-NP in environmental water samples was successfully evaluated. In addition, the sensor has many advantages, including simple preparation, fast response, high sensitivity and good repeatability. It may be helpful for potential applications in detecting other targets.

Top 10 Cited Papers in the Section “Electrocatalysis”

This editorial is dealing with the most cited papers published in the years 2018–2019 in the section “Electrocatalysis” of the journal Catalysts [...]

Electrochemical Sensing Fabricated with Ta2O5 Nanoparticle-Electrochemically Reduced Graphene Oxide Nanocomposite for the Detection of Oxytetracycline

A novel tantalum pentoxide nanoparticle-electrochemically reduced graphene oxide nanocomposite-modified glassy carbon electrode (Ta₂O₅-ErGO/GCE) was developed for the detection of oxytetracycline in milk. The composition, structure and morphology of GO, Ta₂O₅, and Ta₂O₅-ErGO were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Oxytetracycline electrochemical behavior on the bare GCE, GO/GCE, ErGO/GCE, and Ta₂O₅-ErGO/GCE was studied by cyclic voltammetry. The voltammetric conditions (including scan rate, pH, deposition potential, and deposition time) were systematically optimized. With the spacious electrochemical active area, the Ta₂O₅-ErGO/GCE showed a great magnification of the oxidation signal of oxytetracycline, while that of the other electrodes (GCE, GO/GCE, ErGO/GCE) could not reach the same level. Under the optimum conditions, the currents were proportional to the oxytetracycline concentration in the range from 0.2 to 10 μM, and a low detection limit of 0.095 μM (S/N = 3) was detectable. Moreover, the proposed Ta₂O₅-ErGO/GCE performed practically with satisfactory results. The preparation of Ta₂O₅-ErGO/GCE in the current work provides a minor outlook of detecting trace oxytetracycline in milk.

Morphology-dependent MnO2/nitrogen-doped graphene nanocomposites for simultaneous detection of trace dopamine and uric acid

Four nanostructured MnO₂ with various controllable morphologies, including nanowires, nanorods, nanotubes and nanoflowers were synthesized, and then further composited with nitrogen-doped graphene (NG) with the assistance of ultrasonication. The surface morphologies, phase structures, and electrochemical performances of the proposed MnO₂/NG nanohybrids were investigated by various techniques, and their catalytic activities on the electrooxidation of dopamine (DA) and uric acid (UA) were compared systematically. The sensing performances were found to be highly correlated with their morphologies. Among these morphologies, the nanoflower-like MnO₂, composited with NG, displayed the most sensitive response signals for DA and UA. The boosted electrocatalytic activity was ascribed to the unique porous structure, large electroactive area, and low charge transfer resistance (R_ct), which facilitated the electron transfer between electrode and analytes. Two linear response ranges (0.1 μM-10 μM and 10 μM-100 μM) were accompanied with very low detection limits of 34 nM and 39 nM for DA and UA, respectively. Moreover, the successful application of the MnO₂NFs/NG composites for the simultaneous detection of DA and UA in human serum was realized using second-derivative linear sweep voltammetry (SDLSV). These findings give valuable insights for understanding the morphology-dependent sensing properties of MnO₂ based nanomaterials, which is conducive to the rapid development of ubiquitous MnO₂-based electrochemical sensors.

Facile Preparation of Cu2O Nanoparticles and Reduced Graphene Oxide Nanocomposite for Electrochemical Sensing of Rhodamine B

In this paper, the preparation, characterization, and electrochemical application of Cu2O nanoparticles and an electrochemical reduced graphene oxide nanohybrid modified glassy carbon electrode (denoted as Cu2O NPs‒ERGO/GCE) are described. This modified electrode was used as an electrochemical sensor for the catalytic oxidation of rhodamine B (RhB), and it exhibited an excellent electrochemical performance for RhB. The oxidation potential of RhB was decreased greatly, and the sensitivity to detect RhB was improved significantly. Under optimum conditions, a linear dynamic range of 0.01-20.0 μM and a low detection limit of 0.006 μM were obtained with the Cu2O NPs‒ERGO/GCE by using second‒order derivative linear sweep voltammetry. In addition, the selectivity of the prepared modified electrode was analyzed for the determination of RhB. The practical application of this sensor was investigated for the determination of RhB in food samples, and satisfactory results were obtained.

Electrochemical Sensor for Rapid and Sensitive Detection of Tryptophan by a Cu2O Nanoparticles-Coated Reduced Graphene Oxide Nanocomposite

In this paper, a nanocomposite of cuprous oxide and electrochemically reduced graphene oxide (Cu₂O–ERGO) was prepared by a simple and low-cost method; hereby, a new method for the electrochemical determination of tryptophan (Trp) by this composite modified glassy carbon electrode (GCE) is proposed. The prepared materials and modified electrodes were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and cyclic voltammetry (CV). The results showed that Cu₂O–ERGO/GCE had good electrocatalytic activity for Trp. The effects of supporting electrolyte, scanning rate, accumulation potential, and accumulation time on the determination of Trp were studied. Under the optimum experimental conditions, Trp was quantitatively analyzed by square-wave voltammetry (SWV). The oxidation peak current of Trp had a good linear relationship with its concentration in the range of 0.02–20 μM, and the detection limit was 0.01 μM (S/N = 3). In addition, the modified electrode has high sensitivity, good repeatability, and long-term stability. Finally, the proposed method has been successfully applied in the determination of Trp concentration in practical samples.

Fabrication and Performance of ZnO Doped Tantalum Oxide Multilayer Composite Coatings on Ti6Al4V for Orthopedic Application

Ti6Al4V titanium alloy has been widely used as medical implant material in orthopedic surgery, and one of the obstacles preventing it from wide use is toxic metal ions release and bacterial implant infection. In this paper, in order to improve corrosion resistance and antibacterial performance of Ti6Al4V titanium alloy, ZnO doped tantalum oxide (Ta_xO_y) multilayer composite coating ZnO-Ta_xO_y/Ta_xOy/Ta_xO_y-TiO₂/TiO₂/Ti (ZnO-Ta_xO_y) was deposited by magnetron sputtering at room temperature. As a comparison, monolayer Ta_xO_y coating was prepared on the surface of Ti6Al4V alloy. The morphology and phase composition of the coatings were investigated by field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD), the elemental chemical states of coating surfaces were investigated by X-ray photoelectron spectroscope (XPS). The adhesion strength and corrosion resistance of the coatings were examined by micro-scratch tester and electrochemical workstations, respectively. The results show that the adhesion strength of multilayer ZnO-Ta_xO_y coating is 16.37 times higher than that of single-layer Ta_xO_y coating. The ZnO-Ta_xO_y composite coating has higher corrosion potential and lower corrosion current density than that of Ta_xO_y coating, showing better corrosion inhibition. Furthermore, antibacterial test revealed that multilayer ZnO-Ta_xO_y coating has a much better antibacterial performance by contrast.

A Novel Modified Electrode for Detection of the Food Colorant Sunset Yellow Based on Nanohybrid of MnO₂ Nanorods-Decorated Electrochemically Reduced Graphene Oxide

The nanohybrid of electrochemically-reduced graphene oxide (ERGO) nanosheets decorated with MnO₂ nanorods (MnO₂ NRs) was modified on the surface of a glassy carbon electrode (GCE). Controlled potential reduction was applied for the reduction of graphene oxide (GO). The characterization was performed by scanning electron microscopy, X-ray diffraction and cyclic voltammetry. Compared with the poor electrochemical response at bare GCE, a well-defined oxidation peak of sunset yellow (SY) was observed at the MnO₂ NRs-ERGO/GCE, which was attributed to the high accumulation efficiency as well as considerable electrocatalytic activity of ERGO and MnO₂ NRs on the electrode surface. The experimental parameters for SY detection were optimized in detail. Under the optimized experiment conditions, the MnO₂ NRs-ERGO/GCE showed good linear response to SY in concentration range of 0.01–2.0 μM, 2.0–10.0 μM and 10.0–100.0 μM with a detection limit of 2.0 nM. This developed method was applied for SY detection in soft drinks with satisfied detected results.

Facile and Ultrasensitive Determination of 4-Nitrophenol Based on Acetylene Black Paste and Graphene Hybrid Electrode

4-nitrophenol (4-NP) is a hazardous waste and a priority toxic pollutant identified by US Environmental Protection Agency (EPA). Hence, in this paper, a voltammetric sensor was proposed for the direct and sensitive detection of 4-nitrophenol (4-NP) at nanomolar level in complex matrices by using graphene and acetylene black paste hybridized electrode (GR/ABPE). Under optimal conditions, the calibration curve demonstrates a linear relationship for 4-NP in the range from 20 nM to 8.0 μM and 8.0 μM to 0.1 mM separately with the detection limit of 8.0 nM. In addition to it, the performance of the GR/ABPE in practical applications was evaluated by detecting 4-NP in various water samples, and satisfactory recoveries were realized. Therefore, GR/ABPE may have a great potential application for facile and sensitive detection of 4-NP in complex matrices at nanomolar level.

Determination of Uric Acid in Co-Presence of Dopamine and Ascorbic Acid Using Cuprous Oxide Nanoparticle-Functionalized Graphene Decorated Glassy Carbon Electrode

Cuprous oxide nanoparticles (Cu2O NPs) were dispersed into a graphene oxide (GO) solution to form a homogeneous Cu2O-GO dispersion. After this, the cuprous oxide nanoparticles were functionalized to electrochemically reduce the graphene oxide decorated glassy carbon electrode (Cu2O-ErGO/GCE). This was prepared by coating the Cu2O-GO dispersion onto the surface of the glassy carbon electrode (GCE), which was followed by a potentiostatic reduction process. An irreversible two-electron reaction of uric acid (UA) was observed at the voltammetric sensor. Moreover, the high concentrations of dopamine (DA) and ascorbic acid (AA) hardly affected the peak current of UA, which suggested that Cu2O-ErGO/GCE have excellent selectivity for UA. This is probably because the response peaks of the three compounds are well-separated from each other. The oxidation peak current was proportional to the concentration of UA in the ranges of 2.0 nM−0.6 μM and 0.6 μM−10 μM, respectively, with a low limit of detection (S/N = 3, 1.0 nM) after an accumulation time of 120 s. Cu2O-ErGO/GCE was utilized for the rapid detection of UA in human blood serum and urine samples with satisfactory results.

Novel Electrochemical Sensors Based on Cuprous Oxide-Electrochemically Reduced Graphene Oxide Nanocomposites Modified Electrode toward Sensitive Detection of Sunset Yellow

Control and detection of sunset yellow is an utmost demanding issue, due to the presence of potential risks for human health if excessively consumed or added. Herein, cuprous oxide-electrochemically reduced graphene nanocomposite modified glassy carbon electrode (Cu₂O-ErGO/GCE) was developed for the determination of sunset yellow. The Cu₂O-ErGO/GCE was fabricated by drop-casting Cu₂O-GO dispersion on the GCE surface following a potentiostatic reduction of graphene oxide (GO). Scanning electron microscope and X-ray powder diffractometer was used to characterize the morphology and microstructure of the modification materials, such as Cu₂O nanoparticles and Cu₂O-ErGO nanocomposites. The electrochemical behavior of sunset yellow on the bare GCE, ErGO/GCE, and Cu₂O-ErGO/GCE were investigated by cyclic voltammetry and second-derivative linear sweep voltammetry, respectively. The analytical parameters (including pH value, sweep rate, and accumulation parameters) were explored systematically. The results show that the anodic peak currents of Cu₂O-ErGO /GCE are 25-fold higher than that of the bare GCE, due to the synergistic enhancement effect between Cu₂O nanoparticles and ErGO sheets. Under the optimum detection conditions, the anodic peak currents are well linear to the concentrations of sunset yellow, ranging from 2.0 × 10⁻⁸ mol/L to 2.0 × 10⁻⁵ mol/L and from 2.0 × 10⁻⁵ mol/L to 1.0 × 10⁻⁴ mol/L with a low limit of detection (S/N = 3, 6.0 × 10⁻⁹ mol/L). Moreover, Cu₂O-ErGO/GCE was successfully used for the determination of sunset yellow in beverages and food with good recovery. This proposed Cu₂O-ErGO/GCE has an attractive prospect applications on the determination of sunset yellow in diverse real samples.