Catalytic Performance of Gold Supported on Mn, Fe and Ni Doped Ceria in the Preferential Oxidation of CO in H2-Rich Stream

Magnesium as a Methanation Suppressor for Iron- and Cobalt-Based Oxide Catalysts during the Preferential Oxidation of Carbon Monoxide

The preferential oxidation of CO (CO-PrOx) to CO2 is an effective catalytic process for purifying the H2 utilized in proton-exchange membrane fuel cells for power generation. Our current work reports on the synthesis, characterization and CO-PrOx performance evaluation of unsubstituted and magnesium-substituted iron- and cobalt-based oxide catalysts (i.e., Fe3O4, Co3O4, MgFe2O4 and MgCo2O4). More specifically, the ability of Mg to stabilize the MgFe2O4 and MgCo2O4 structures, as well as suppress CH4 formation during CO-PrOx was of great importance in this study. The cobalt-based oxide catalysts achieved higher CO2 yields than the iron-based oxide catalysts below 225 °C. The highest CO2 yield (100%) was achieved over Co3O4 between 150 and 175 °C, however, undesired CH4 formation was only observed over this catalyst due to the formation of bulk fcc and hcp Co0 between 200 and 250 °C. The presence of Mg in MgCo2O4 suppressed CH4 formation, with the catalyst only reducing to a CoO-type phase (possibly containing Mg). The iron-based oxide catalysts did not undergo bulk reduction and did not produce CH4 under reaction conditions. In conclusion, our study has demonstrated the beneficial effect of Mg in stabilizing the active iron- and cobalt-based oxide structures, and in suppressing CH4 formation during CO-PrOx.

Hierarchical Au/CeO2 systems – influence of Ln3+ dopants on the catalytic activity in the propane oxidation process

The catalytic activity of the hierarchical tube-like Au/Ce1−xLnxO2−x/2 in the propane oxidation process depends not only on the presence of Au nanoparticles on the support surface but also on the type of deformation in the CeO2 network.

High-Performing Au-Ag Bimetallic Catalysts Supported on Macro-Mesoporous CeO2 for Preferential Oxidation of CO in H2-Rich Gases

We report here an investigation on the preferential oxidation of carbon monoxide in an H2-rich stream (CO-PROX reaction) over mono and bimetallic Au-Ag samples supported on macro-mesoporous CeO2. The highly porous structure of ceria and the synergistic effect, which occurs between the bimetallic Au-Ag system and the support, led to promising catalytic performance at low temperature (CO2 yield of 88% and CO2 selectivity of 100% at 60 °C), which is suitable for a possible application in the polymer electrolyte membrane fuel cell (PEMFC). The morphological, structural, textural and surface features of the catalysts were determined by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), N2-adsoprtion-desorption measurements, Temperature Programmed Reduction in hydrogen (H2-TPR), Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Photoelectron Spectroscopy (XPS). Furthermore, the catalytic stability of the best active catalyst, i.e., the AuAg/CeO2 sample, was evaluated also in the presence of water vapor and carbon dioxide in the gas stream. The excellent performances of the bimetallic sample, favored by the peculiar porosity of the macro-mesoporous CeO2, are promising for possible scale-up applications in the H2 purification for PEM fuel cells.

Divergent influence of {1 1 1} vs. {1 0 0} crystal planes and Yb3+ dopant on CO oxidation paths in mixed nano-sized oxide Au/Ce1−xYbxO2−x/2 (x = 0 or 0.1) systems

In this paper, the fundamental information on interactions in systems concerning nanocrystalline gold disperses on the shaped (octahedron-like or cube-like) Ce_1−xYb_xO_2−x/2 (x = 0 or 0.1) support has been discussed.