Immobilised Cerium-Doped Zinc Oxide as a Photocatalyst for the Degradation of Antibiotics and the Inactivation of Antibiotic-Resistant Bacteria

Antibiotic resistomes and their chemical residues in aquatic environments in Africa

The aquatic environment is a hotspot for the transfer of antibiotic resistance to humans and animals. Several reviews have put together research efforts on the presence and distribution of antibiotic resistant bacteria (ARB), antibiotic resistance genes (ARGs), and antibiotic chemical residue (ACRs) in food, hospital wastewater, and even in other aquatic environments. However, these reports are largely focused on data from developed countries, while data from developing countries and especially those in Africa, are only marginally discussed. This review is the first effort that distills information on the presence and distribution of ARGs and ACRs in the African aquatic environments (2012-2021). This review provides critical information on efforts put into the study of ARB, ARGs, and ACRs in aquatic environments in Africa through the lens of the different sub-regions in the continent. The picture provided is compared with those from some other continents in the world. It turns out that the large economies in Africa (South Africa, Nigeria, Tunisia, Kenya) all have a few reports of ARB and ARGs in their aquatic environment while smaller economies in the continent could barely provide reports of these in their aquatic environment (in most cases no report was found) even though they have some reports on resistomes from clinical studies. Interestingly, the frequency of these reports of ARB and ARGs in aquatic environments in Africa suggests that the continent is ahead of the South American continent but behind Europe and Asia in relation to providing information on these contaminants. Common ARGs found in African aquatic environment encode resistance to sulfonamide, tetracycline, β-lactam, and macrolide classes of antibiotics. The efforts and studies from African scientists in eliminating ARB and ARGs from the aquatic environment in Africa are also highlighted. Overall, this document is a ready source of credible information for scientists, policy makers, governments, and regional bodies on ARB, ARGs, and ACRs in aquatic environments in Africa. Hopefully, the information provided in this review will inspire some necessary responses from all stakeholders in the water quality sector in Africa to put in more effort into providing more scientific evidence of the presence of ARB, ARGs, and ACRs in their aquatic environment and seek more efficient ways to handle them to curtail the spread of antibiotic resistance among the population in the continent. This will in turn, put the continent on the right path to meeting the United Nations Sustainable Development Goals #3 and #6, which at the moment, appears to be largely missed by most countries in the continent.

Antimicrobial Effectiveness of Innovative Photocatalysts: A Review

Waterborne pathogens represent one of the most widespread environmental concerns. Conventional disinfection methods, including chlorination and UV, pose several operational and environmental problems; namely, formation of potentially hazardous disinfection by-products (DBPs) and high energy consumption. Therefore, there is high demand for effective, low-cost disinfection treatments. Among advanced oxidation processes, the photocatalytic process, a form of green technology, is becoming increasingly attractive. A systematic review was carried out on the synthesis, characterization, toxicity, and antimicrobial performance of innovative engineered photocatalysts. In recent decades, various engineered photocatalysts have been developed to overcome the limits of conventional photocatalysts using different synthesis methods, and these are discussed together with the main parameters influencing the process behaviors. The potential environmental risks of engineered photocatalysts are also addressed, considering the toxicity effects presented in the literature.

Large-Scale MOCVD Deposition of Nanostructured TiO2 on Stainless Steel Woven: A Systematic Investigation of Photoactivity as a Function of Film Thickness

Heterogeneous photocatalysis is considered as one of the most appealing options for the treatment of organic pollutants in water. However, its definitive translation into industrial practice is still very limited because of both the complexity of large-scale production of catalysts and the problems involved in handling the powder-based photocatalysts in the industrial plants. Here, we demonstrate that the MOCVD approach can be successfully used to prepare large-scale supported catalysts with a good photocatalytic activity towards dye degradation. The photocatalyst consisted of nanostructured TiO₂ thin film deposited on a stainless steel mesh substrate. The film thickness, the morphological features, and the crystallographic properties of the different portions of the sample were correlated to the position in the reactor chamber and the reaction conditions. The photocatalytic activity was evaluated according to the international standard test ISO 10678:2010 based on methylene blue degradation. The photocatalytic activity is essentially constant (P_MB over 40 µmol·m⁻²·h⁻¹) throughout the film, except for the portion of sample placed at the very end of the reactor chamber, where the TiO₂ film is too thin to react properly. It was assessed that a minimum film thickness of 250–300 nm is necessary to reach the maximum photocatalytic performance.

Nanophotocatalysis for the Removal of Pharmaceutical Residues from Water Bodies: State of Art and Recent Trends

Background:

The occurrence of pharmaceuticals in surface and drinking water is ubiquitous and is a major concern of researchers. These compounds cause a destructive impact on aquatic and terrestrial life forms, and the removal of these compounds from the environment is a challenging issue. Existent conventional wastewater treatment processes are generally inefficacious because of their low degradation efficiency and inadequate techniques associated with the disposal of adsorbed pollutants during comparatively effective methods like the adsorption process.

Remediation Method:

Semiconductor-mediated photocatalysis is an attractive technology for the efficient removal of pharmaceutical compounds. Among various semiconductors, TiO2 and ZnObased photocatalysts gained much interest during the last years because of their efficiency in decomposing and mineralizing the lethal organic pollutants with the utilization of UV-visible light. Incessant efforts are being undertaken for tuning the physicochemical, optical, and electronic properties of these photocatalysts to strengthen their overall photocatalytic performance with good recycling efficiency.

Results:

This review attempts to showcase the recent progress in the rational design and fabrication of nanosized TiO2 and ZnO photocatalysts for the removal of pollutants derived from the pharmaceutical industry and hospital wastes.

Conclusion:

Photocatalysis involving TiO2 and ZnO provides a positive impact on pollution management and could be successfully applied to remove pharmaceuticals from wastewater streams. Structure modifications, the introduction of heteroatoms, and the integration of polymers with these nano photocatalysts offer leapfrogging opportunities for broader applications in the field of photocatalysis.

Visible-Light-Driven Photocatalytic Inactivation of Bacteria, Bacteriophages, and Their Mixtures Using ZnO-Coated HDPE Beads as Floating Photocatalyst

Semiconductor materials used as photocatalysts are considered among the most effective ways to treat biologically polluted water. Certainly, efficiency depends on the selection of photocatalyst and its substrate, as well as the possibility of its application in a broader spectrum of light. In this study, a reactive magnetron sputtering technique was applied for the immobilisation of ZnO photocatalyst on the surface of HDPE beads, which were selected as the buoyant substrates for enhanced photocatalytic performance and easier recovery from the treated water. Moreover, the study compared the effect on the inactivation of the microorganism between ZnO-coated HDPE beads without Ni and with Ni underlayer. Crystal structure, surface morphology, and chemical bonds of as-deposited ZnO films were investigated by X-ray diffraction, scanning electron microscopy, and X-ray photoelectron spectroscopy, respectively. Visible-light-induced photocatalytic treatment was performed on the Gram-negative and Gram-positive bacteria and bacteriophages PRD1, T4, and their mixture. Higher bacteria inactivation efficiency was obtained using the ZnO photocatalyst with Ni underlayer for the treatment of S. Typhimurium and M. Luteus mixtures. As for infectivity of bacteriophages, T4 alone and in the mixture with PRD1 were more affected by the produced photocatalyst, compared with PRD1.

A review on disinfection technologies for controlling the antibiotic resistance spread

The occurrence of antibiotic-resistant bacteria (ARB) in water bodies poses a sanitary and environmental risk. These ARB and other mobile genetic elements can be easily spread from hospital facilities, the point in which, for sure, they are more concentrated. For this reason, novel clean and efficient technologies are being developed for allowing to remove these ARB and other mobile genetic elements before their uncontrolled spread. In this paper, a review on the recent knowledge about the state of the art of the main disinfection technologies to control the antibiotic resistance spread from natural water, wastewater, and hospital wastewater (including urine matrices) is reported. These technologies involve not only conventional processes, but also the recent advances on advanced oxidation processes (AOPs), including electrochemical advanced oxidation processes (EAOPs). This review summarizes the state of the art on the applicability of these technologies and also focuses on the description of the disinfection mechanisms by each technology, highlighting the promising impact of EAOPs on the remediation of this important environmental and health problem.

Remediation of Diethyl Phthalate in Aqueous Effluents with TiO2-Supported Rh0 Nanoparticles as Multicatalytic Materials

An innovative “domino” process, based on an arene hydrogenation followed by a photocatalytic step, was designed for the remediation of endocrine disrupting compounds, in highly concentrated aqueous effluents. The novelty relies on the use of TiO2-supported zerovalent Rh nanoparticles as multicatalytic materials (MCMs) for this two-step treatment, applied on diethyl phthalate, which is a model aromatic pollutant frequently present in aquatic environments. This nanocomposite advanced material, which was easily prepared by a green, wet impregnation methodology, proved to be active in the successive reactions, the reduction in the aromatic ring, and the photodegradation step. This sustainable approach offers promising alternatives in the case of photoresistive compounds.

Photocatalytic ZnO-Assisted Degradation of Spiramycin in Urban Wastewater: Degradation Kinetics and Toxicity

The removal of contaminants of emerging concern from urban wastewater treatment plants (WWTPs) remains a challenge to promote safe wastewater reuse practices. Macrolides are the most abundant antibiotics detected in untreated wastewater and their concentration in WWTPs effluents is only partially reduced by conventional treatments. Among several advanced oxidation processes (AOPs), photocatalysis has demonstrated the capability to effectively remove pharmaceuticals from different aqueous matrices. Recently, ZnO has emerged as an efficient, promising, and less expensive alternative to TiO2, due to its photocatalytic capability and attitude to exploit better the solar spectrum than TiO2. In this study, the behaviors of ZnO photocatalysis were evaluated using a representative macrolide antibiotic, spiramycin (SPY), in aqueous solutions and urban wastewater. After 80 min of photocatalysis, 95–99% removal of SPY was achieved at 1 g L−1 ZnO concentrations in aqueous solutions and wastewater, respectively. After treatment, the effluent toxicity, evaluated using the bacterium Aliivibrio fischeri, the green alga Raphidocelis subcapitata, and the crustacean Daphnia magna ranged between slight acute and high acute hazard. Filterable and ultrafilterable Zn concentrations were quantified in treated effluents and shown to be high enough to contribute to the observed toxicity.

Environmental Applications of Photocatalytic Processes

Photocatalytic processes have been investigated in different environmental fields, but their applications at full scale are still scarce [...]

Problems of conventional disinfection and new sterilization methods for antibiotic resistance control

The problem of bacterial antibiotic resistance has attracted considerable research attention, and the effects of water treatment on antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs) are being increasingly investigated. As an indispensable part of the water treatment process, disinfection plays an important role in controlling antibiotic resistance. At present, there were many studies on the effects of conventional and new sterilization methods on ARB and ARGs. However, there is a lack of literature relating to the limitations of conventional methods and analysis of new techniques. Therefore, this review focuses on analyzing the deficiencies of conventional disinfection and the development of new methods for antibiotic resistance control to guide future research. Firstly, we analyzed the effects and drawbacks of conventional disinfection methods, such as chlorine (Cl), ultraviolet (UV) and ozone on antibiotic resistance control. Secondly, we discuss the research progress and shortcomings of new sterilization methods in antibiotic resistance. Finally, we propose suggestions for future research directions. There is an urgent need for new effective and low-cost sterilization methods. Disinfection via UV and chlorine in combination, UV/chlorine showed greater potential for controlling ARGs.

Changes in Antibiotic Resistance Gene Levels in Soil after Irrigation with Treated Wastewater: A Comparison between Heterogeneous Photocatalysis and Chlorination

Wastewater (WW) reuse is expected to be increasingly indispensable in future water management to mitigate water scarcity. However, this increases the risk of antibiotic resistance (AR) dissemination via irrigation. Herein, a conventional (chlorination) and an advanced oxidation process (heterogeneous photocatalysis (HPC)) were used to disinfect urban WW to the same target of Escherichia coli <10 CFU/100 mL and used to irrigate lettuce plants (Lactuca sativa) set up in four groups, each receiving one of four water types, secondary WW (positive control), fresh water (negative control), chlorinated WW, and HPC WW. Four genes were monitored in water and soil, 16S rRNA as an indicator of total bacterial load, intI1 as a gene commonly associated with anthropogenic activity and AR, and two AR genes blaOXA-10 and qnrS. Irrigation with secondary WW resulted in higher dry soil levels of intI1 (from 1.4 × 104 copies/g before irrigation to 3.3 × 105 copies/g after). HPC-treated wastewater showed higher copy numbers of intI1 in the irrigated soil than chlorination, but the opposite was true for blaOXA-10. The results indicate that the current treatment is insufficient to prevent dissemination of AR markers and that HPC does not offer a clear advantage over chlorination.

Best available technologies and treatment trains to address current challenges in urban wastewater reuse for irrigation of crops in EU countries

Conventional urban wastewater treatment plants (UWTPs) are poorly effective in the removal of most contaminants of emerging concern (CECs), including antibiotics, antibiotic resistant bacteria and antibiotic resistance genes (ARB&ARGs). These contaminants result in some concern for the environment and human health, in particular if UWTPs effluents are reused for crop irrigation. Recently, stakeholders' interest further increased in Europe, because the European Commission is currently developing a regulation on water reuse. Likely, conventional UWTPs will require additional advanced treatment steps to meet water quality limits yet to be officially established for wastewater reuse. Even though it seems that CECs will not be included in the proposed regulation, the aim of this paper is to provide a technical contribution to this discussion as well as to support stakeholders by recommending possible advanced treatment options, in particular with regard to the removal of CECs and ARB&ARGs. Taking into account the current knowledge and the precautionary principle, any new or revised water-related Directive should address such contaminants. Hence, this review paper gathers the efforts of a group of international experts, members of the NEREUS COST Action ES1403, who for three years have been constructively discussing the efficiency of the best available technologies (BATs) for urban wastewater treatment to abate CECs and ARB&ARGs. In particular, ozonation, activated carbon adsorption, chemical disinfectants, UV radiation, advanced oxidation processes (AOPs) and membrane filtration are discussed with regard to their capability to effectively remove CECs and ARB&ARGs, as well as their advantages and drawbacks. Moreover, a comparison among the above-mentioned processes is performed for CECs relevant for crop uptake. Finally, possible treatment trains including the above-discussed BATs are discussed, issuing end-use specific recommendations which will be useful to UWTPs managers to select the most suitable options to be implemented at their own facilities to successfully address wastewater reuse challenges.

Bacteria Exposed to Silver Nanoparticles Synthesized by Laser Ablation in Water: Modelling E. coli Growth and Inactivation

This study is aimed to better understand the bactericidal mode of action of silver nanoparticles. Here we present the production and characterization of laser-synthesized silver nanoparticles along with growth curves of bacteria treated at sub-minimal and minimal inhibitory concentrations, obtained by optical density measurements. The main effect of the treatment is the increase of the bacterial apparent lag time, which is very well described by the novel growth model as well as the entire growth curves for different concentrations. The main assumption of the model is that the treated bacteria uptake the nanoparticles and inactivate, which results in the decrease of both the nanoparticles and the bacteria concentrations. The lag assumes infinitive value for the minimal inhibitory concentration treatment. This apparent lag phase is not postponed bacterial growth. It is a dynamic state in which the bacterial growth and death rates are close in value. Our results strongly suggest that the predominant mode of antibacterial action of silver nanoparticles is the penetration inside the membrane.