Heterogeneous Gold Catalysis: From Discovery to Applications

Synthesis of Metallic Nanostructures Using Ionizing Radiation and Their Applications

This paper reviews the radiation-induced synthesis of metallic nanostructures and their applications. Radiolysis is a powerful method for synthesizing metallic nanoparticles in solution and heterogeneous media, and it is a clean alternative to other existing physical, chemical, and physicochemical methods. By varying parameters such as the absorbed dose, dose rate, concentrations of metallic precursors, and nature of stabilizing agents, it is possible to control the size, shape, and morphology (alloy, core-shell, etc.) of the nanostructures and, consequently, their properties. Therefore, the as-synthesized nanoparticles have many potential applications in biology, medicine, (photo)catalysis, or energy conversion.

Highly Active Large Au Clusters and Even More Active Ag Nanoparticles Supported on Ceria-Zirconia: Impact of Particle Size and Potassium Ion Loading on Activity in Catalytic Transfer Hydrogenation

Although heterogeneous monometallic gold catalysts are commonly more active when the gold particles are smaller, this study shows that the reverse is true in the case of liquid phase catalytic transfer hydrogenation of acetophenone with 2-pentanol. Higher catalytic activity of larger gold particles, i.e., over 30 nm in diameter, than of smaller particles of average 4 nm in size was observed. Moreover, this effect was contradictory to that observed for supported monometallic silver catalysts in which the interaction with the support and hence particle size was shown to cause drastic changes in the activity in this reaction, with the large particles being completely inactive and tiny ones being the most active system studied. In this reaction, the ceria-zirconia solid solutions were used as the supports for the catalysts and both zirconium doped ceria, as well as cerium doped zirconia carriers were tested. The supports themselves exhibited little activity in this reaction. It was shown that the activity of the supports and catalysts depends on the Ce/Zr ratio and potassium content. Both types of catalysts showed excellent selectivity to 1-phenylethanol and conversion of acetophenone, although it was noted that a high loading of potassium carbonate in the gold catalysts propelled undesired reactions, thereby reducing the selectivity to 1-phenylethanol.

Active and Recyclable Gold Metal Nanoparticles Catalyst Supported on Nitrogen-Doped Mesoporous Carbon for Chemoselective Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol

Several supported gold metal catalysts with different Au nanoparticles sizes were prepared and evaluated for the chemoselective hydrogenation of cinnamaldehyde (CA) to cinnamyl alcohol (CAL). To investigate the structure-activity relationship, stability of catalyst, heterogeneity and recyclability, the structural characteristics of materials and Au catalysts (fresh and spent catalysts) were studied by employing variety of physico-chemical techniques. The interrelationship among Au nanoparticles size (nm) with turnover frequency (h^-1 ) of Au catalysts has also been explored. Among the various Au catalysts tested, nitrogen-doped mesoporous carbon (NMC) supported Au catalyst having homogeneously dispersed (78.8%) Au nanoparticles (1.6 nm) synthesized by sol-immobilization method (Au-NMC-SI) demonstrated improved catalytic activity affording 78% CAL selectivity and 94.2% CA conversion without using any promoter. Moreover, Au-NMC-SI catalyst exhibited good recyclability and stability. The catalyst synthesis approach described in this investigation opens up a novel strategy for the design of highly efficient metal nano-catalysts supported on NMC materials.

Pulsed Laser in Liquids Made Nanomaterials for Catalysis

Catalysis is essential to modern life and has a huge economic impact. The development of new catalysts critically depends on synthetic methods that enable the preparation of tailored nanomaterials. Pulsed laser in liquids synthesis can produce uniform, multicomponent, nonequilibrium nanomaterials with independently and precisely controlled properties, such as size, composition, morphology, defect density, and atomistic structure within the nanoparticle and at its surface. We cover the fundamentals, unique advantages, challenges, and experimental solutions of this powerful technique and review the state-of-the-art of laser-made electrocatalysts for water oxidation, oxygen reduction, hydrogen evolution, nitrogen reduction, carbon dioxide reduction, and organic oxidations, followed by laser-made nanomaterials for light-driven catalytic processes and heterogeneous catalysis of thermochemical processes. We also highlight laser-synthesized nanomaterials for which proposed catalytic applications exist. This review provides a practical guide to how the catalysis community can capitalize on pulsed laser in liquids synthesis to advance catalyst development, by leveraging the synergies of two fields of intensive research.

Near-Thermal Reactions of Au+(1S,3D) and AuX+ with CH3X (X = Br, I): A Combined Experimental and Computational Analysis

Reactions of Au⁺(¹S,³D) and AuX⁺ with CH₃X (X = I and Br) were performed in the gas phase by utilizing a selected-ion drift cell reactor. These experiments were done at room temperature as well as reduced temperature (∼200 K) at a total pressure of 3.5 Torr in helium. Rate coefficients, product sequencing, and branching fractions were obtained for all reactions to evaluate reaction efficiencies and higher-order processes. Reactions of both Au⁺ states proceed with moderate efficiencies as compared to the average dipole orientation model with these neutral substrates. Results from this work revealed that, dependent on the reacting partner, Au⁺(¹S) exhibits, among others, halogen abstraction, HX elimination, and association. By comparison, Au⁺(³D) participates primarily in charge transfer and halogen abstraction. Dependent on the halogen ligand, AuX⁺ ions induce several processes, including association, charge transfer, halogen loss, and halogen substitution. AuI⁺ reacting with CH₃Br resulted in association exclusively, whereas the AuI⁺/CH₃I and AuBr⁺/CH₃Br systems exhibited halogen loss as the dominant process. By contrast, all possible bimolecular pathways occurred in the reaction of AuBr⁺ with CH₃I. Observed products indicate that displacement of bromine by iodine on gold is favored in ionic products, consistent with the thermochemical preference for formation of the Au⁺-I bond. All AuX⁺ reactions proceed at maximum efficiency. Potential energy surfaces calculated at the B3LYP/def2-TZVPP level of theory for the AuX⁺ reactions are in good agreement with the available thermochemistry for these species and with previously calculated structures and energetics. Experimental and computational results are consistent with a mechanism for the AuX⁺/CH₃Y systems where bimolecular products occur either via direct loss of the halogen originally on Au or via a common intermediate resulting from methyl migration in which the Au center is three-coordinate.

Silk Polymers and Nanoparticles: A Powerful Combination for the Design of Versatile Biomaterials

Silk fibroin (SF) is a natural protein largely used in the textile industry but also in biomedicine, catalysis, and other materials applications. SF is biocompatible, biodegradable, and possesses high tensile strength. Moreover, it is a versatile compound that can be formed into different materials at the macro, micro- and nano-scales, such as nanofibers, nanoparticles, hydrogels, microspheres, and other formats. Silk can be further integrated into emerging and promising additive manufacturing techniques like bioprinting, stereolithography or digital light processing 3D printing. As such, the development of methodologies for the functionalization of silk materials provide added value. Inorganic nanoparticles (INPs) have interesting and unexpected properties differing from bulk materials. These properties include better catalysis efficiency (better surface/volume ratio and consequently decreased quantify of catalyst), antibacterial activity, fluorescence properties, and UV-radiation protection or superparamagnetic behavior depending on the metal used. Given the promising results and performance of INPs, their use in many different procedures has been growing. Therefore, combining the useful properties of silk fibroin materials with those from INPs is increasingly relevant in many applications. Two main methodologies have been used in the literature to form silk-based bionanocomposites: in situ synthesis of INPs in silk materials, or the addition of preformed INPs to silk materials. This work presents an overview of current silk nanocomposites developed by these two main methodologies. An evaluation of overall INP characteristics and their distribution within the material is presented for each approach. Finally, an outlook is provided about the potential applications of these resultant nanocomposite materials.

Rivalry between Regium and Hydrogen Bonds Established within Diatomic Coinage Molecules and Lewis Acids/Bases

A theoretical study of the complexes formed by Ag₂ and Cu₂ with different molecules, XH (FH, ClH, OH₂ , SH₂ , HCN, HNC, HCCH, NH₃ and PH₃ ) that can act as hydrogen-bond donors (Lewis acids) or regium-bond acceptors (Lewis bases) was carried out at the CCSD(T)/CBS computational level. The heteronuclear diatomic coinage molecules (AuAg, AuCu, and AgCu) have also been considered. With the exception of some of the hydrogen-bonded complexes with FH, the regium-bonded binary complexes are more stable. The AuAg and AuCu molecules show large dipole moments that weaken the regium bond (RB) with Au and favour those through the Ag and Cu atoms, respectively.

Metal Nanoparticles-Enhanced Biosensors: Synthesis, Design and Applications in Fluorescence Enhancement and Surface-enhanced Raman Scattering

Metal nanoparticles (NP) that exhibit localized surface plasmon resonance play an important role in metal-enhanced fluorescence (MEF) and surface-enhanced Raman scattering (SERS). Among the optical biosensors, MEF and SERS stand out to be the most sensitive techniques to detect a wide range of analytes from ions, biomolecules to macromolecules and microorganisms. Particularly, anisotropic metal NPs with strongly enhanced electric field at their sharp corners/edges under a wide range of excitation wavelengths are highly suitable for developing the ultrasensitive plasmon-enhanced biosensors. In this review, we first highlight the reliable methods for the synthesis of anisotropic gold NPs and silver NPs in high yield, as well as their alloys and composites with good control of size and shape. It is followed by the discussion of different sensing mechanisms and recent advances in the MEF and SERS biosensor designs. This includes the review of surface functionalization, bioconjugation and (directed/self) assembly methods as well as the selection/screening of specific biorecognition elements such as aptamers or antibodies for the highly selective bio-detection. The right combinations of metal nanoparticles, biorecognition element and assay design will lead to the successful development of MEF and SERS biosensors targeting different analytes both in-vitro and in-vivo. Finally, the prospects and challenges of metal-enhanced biosensors for future nanomedicine in achieving ultrasensitive and fast medical diagnostics, high-throughput drug discovery as well as effective and reliable theranostic treatment are discussed.