Electrochemical Engineering of Nanoporous Materials for Photocatalysis: Fundamentals, Advances, and Perspectives

Cu2+doped TiO2-SiO2with photonic crystal structure for synergistic enhancement of photocatalytic degradation under visible light irradiation

The development of visible light photocatalysts with the ability to efficiently degrade pollutants is an important measure to solve environmental problems. In this paper, Cu²⁺doped TiO₂-SiO₂(CTS) with photonic crystal structure composite was successfully synthesized via sol-gel strategy and template method. The prepared materials have abundant pore structure and uniform pore diameter, and the pores were arranged in a periodically hexagonal structure. It showed enhancing synergistic effect of adsorption-photodegradation ability for removing Rhodamine B (RhB). The brilliant adsorption capability of the catalyst is not only due to the addition of silica which can increase surface area that results the increase in adsorption ability, but also related to the rich and ordered porous structure provided by the photonic crystal. The catalyst has a narrow band gap ∼2.92 eV which exhibits the excellent photocatalytic activity for RhB degradation (>95% at 30 min) under visible light irradiation, and possesses higher photocatalytic reaction apparent rate constants (k) which is 7 folds higher than that of pure TiO₂. The excellent photocatalytic performance is attributed to the Cu²⁺doping that narrows the band gap, increases light absorption, and promotes charge separation. Besides, the constructed photonic crystal structure not only further enhances charge transport but also provides more surface activity sites for photocatalytic reactions. More importantly, the ordered pore structure-photonic crystal can prolong the interaction time between light and catalyst through the slow photon effect and the porous scattering effect. Eventually, the photocatalytic degradation efficiency of the catalyst was significantly improved by the synergistic effect of the above mechanisms.

Element-doped graphitic carbon nitride: confirmation of doped elements and applications

Doping is widely reported as an efficient strategy to enhance the performance of graphitic carbon nitride (g-CN). In the study of element-doped g-CN, the characterization of doped elements is an indispensable requirement, as well as a huge challenge. In this review, we summarize some useful characterization methods which can confirm the existence and chemical states of doped elements. The advantages and shortcomings of these characterization methods are discussed in detail. Various applications of element-doped g-CN and the function of doped elements are also introduced. Overall, this review article aims to provide helpful information for the research of element-doped g-CN.

Engineering of Broadband Nanoporous Semiconductor Photonic Crystals for Visible-Light-Driven Photocatalysis

A new class of semiconductor photonic crystals composed of titanium dioxide (TiO₂)-functionalized nanoporous anodic alumina (NAA) broadband-distributed Bragg reflectors (BDBRs) for visible-light-driven photocatalysis is presented. NAA-BDBRs produced by double exponential pulse anodization (DEPA) show well-resolved, spectrally tunable, broad photonic stop bands (PSBs), the width of which can be precisely tuned from 70 ± 6 to 153 ± 9 nm (in air) by progressive modification of the anodization period in the input DEPA profile. Photocatalytic efficiency of TiO₂-NAA-BDBRs with tunable PSB width upon visible-NIR illumination is studied using three model photodegradation reactions of organics with absorbance bands across the visible spectral regions. Analysis of these reactions allows us to elucidate the interplay of spectral distance between red edge of TiO₂-NAA-BDBRs' PSB, electronic bandgap, and absorbance band of model organics in harnessing visible photons for photocatalysis. Photodegradation reaction efficiency is optimal when the PSB's red edge is spectrally close to the electronic bandgap of the functional semiconductor coating. Photocatalytic performance decreases dramatically when the red edge of the PSB is shifted toward visible wavelengths. However, a photocatalytic recovery is observed when the PSB's red edge is judiciously positioned within the proximity of the absorption band of model organics, indicating that TiO₂-NAA-BDBRs can harness visible electromagnetic waves to speed up photocatalytic reactions by drastically slowing the group velocity of incident photons at specific spectral regions. Our advances provide new opportunities to better understand and engineer light-matter interactions for photocatalysis, using TiO₂-NAA-BDBRs as model nanoporous semiconductor platforms. These high-performing photocatalysts could find broad applicability in visible-NIR light harvesting for environmental remediation, green energy generation, and chemical synthesis.

A review of the α-Fe2O3 (hematite) nanotube structure: recent advances in synthesis, characterization, and applications

α-Fe2O3 nanotubes are exceptional one-dimensional transition metal oxide materials with low density, large surface area, promising electrochemical and photoelectrochemical properties, which are widely investigated in lithium-ion batteries, photoelectrochemical devices, gas sensors, and catalysis. They have drawn significant attention to the fields of energy storage and conversion, and environmental sensing and remediation due to the increase in the global energy crisis and environmental pollution. Many efforts have been made toward controlling the morphology or impurity doping to improve the intrinsic properties of α-Fe2O3 nanotubes. In this review, we introduce the synthesis methods and physicochemical properties of α-Fe2O3 nanotubes. The fabrication conditions, which are important for the physicochemical properties of materials, are also listed to describe the synthesis processes. Furthermore, the development and breakthrough of various applications in batteries, supercapacitors, photoelectrochemical devices, environmental remediation, and sensors are systematically reviewed. Finally, some of the current challenges and future perspectives for α-Fe2O3 nanotubes are discussed. We believe that this timely and critical mini-review will stimulate extensive studies and attract more attention, further improving the development of the α-Fe2O3 (hematite) nanotube structure.