Osteoblasts in a Perfusion Flow Bioreactor-Tissue Engineered Constructs of TiO2 Scaffolds and Cells for Improved Clinical Performance

Impact of gravity on fluid flow and solute transport in the bone lacunar-canalicular system: a multiscale numerical simulation study

Different gravity fields have important effects on the structural morphology of bone. The fluid flow caused by loadings in the bone lacunar-canalicular system (LCS), converts mechanical signals into biological signals and regulates bone reconstruction by affecting effector cells, which ensures the efficient transport of signaling molecules, nutrients, and waste products. In this study, the fluid flow and mass transfer effects of bone lacunar-canalicular system at multi-scale were firstly investigated, and a three-dimensional axisymmetric fluid-solid coupled finite element model of the LCS within three continuous osteocytes was established. The changes in fluid pressure field, flow velocity field, and fluid shear force variation on the surface of osteocytes within the LCS were studied comparatively under different gravitational fields (0 G, 1 G, 5 G), frequencies (1 Hz, 1.5 Hz, 2 Hz) and forms of cyclic compressive loading. The results showed that different frequencies represented different exercise intensities, suggesting that high-intensity exercise may accelerate the fluid flow rate within the LCS and enhance osteocytes activity. Hypergravity enhanced the transport of solute molecules, nutrients, and signaling molecules within the LCS. Conversely, the mass transfer in the LCS may be inhibited under microgravity, which may cause bone loss and eventually lead to the onset of osteoporosis. This investigation provides theoretical guidance for rehabilitative training against osteoporosis.

Porosity and surface curvature effects on the permeability and wall shear stress of trabecular bone: Guidelines for biomimetic scaffolds for bone repair

Scaffolds are an essential component of bone tissue engineering to provide support and create a physiological environment for cells. Biomimetic scaffolds are a promising approach to fulfill the requirements. Bone allografts are widely used scaffolds due to their mechanical and structural characteristics. The scaffold geometry is well known to be an important determinant of induced mechanical stimulation felt by the cells. However, the impact of allograft geometry on permeability and wall shear stress distribution is not well understood. This information is essential for designing biomimetic scaffolds that provide a suitable environment for cells to proliferate and differentiate. The present study investigates the effect of geometry on the permeability and wall shear stress of bone allografts at both macroscopic and microscopic scales. Our results concluded that the wall shear stress was strongly correlated with the porosity of the allograft. The level of wall shear stress at a local scale was also determined by the surface curvature characteristics. The results of this study can serve as a guideline for future biomimetic scaffold designs that provide a mechanical environment favorable for osteogenesis and bone repair.

Three-dimensional (3D) polylactic acid gradient scaffold to study the behavior of osteosarcoma cells under dynamic conditions

This study adopts an in vitro method to recapitulate the behavior of Saos-2 cells, using a system composed of a perfusion bioreactor and poly-L-lactic acid (PLLA) scaffold fabricated using the low-cost thermally-induced phase separation (TIPS) technique. Four distinct scaffold morphologies with different pore sizes were fabricated, characterized by Scanning electron microscopy and micro-CT analysis and tested with osteosarcoma cells under static and dynamic environments to identify the best morphology for cellular growth. In order to accomplish this purpose, cell growth and matrix deposition of the Saos-2 osteosarcoma cell line were assessed using Picogreen and OsteoImage assays. The obtained data allowed us to identify the morphology that better promotes Saos-2 cellular activity in static and dynamic conditions. These findings provided valuable insights into scaffold design and fabrication strategies, emphasizing the importance of the dynamic culture to recreate an appropriate 3D osteosarcoma model. Remarkably, the gradient scaffold exhibits promise for osteosarcoma applications, offering the potential for targeted tissue engineering approaches.

JANUS: an open-source 3D printable perfusion bioreactor and numerical model-based design strategy for tissue engineering

Bioreactors have been employed in tissue engineering to sustain longer and larger cell cultures, managing nutrient transfer and waste removal. Multiple designs have been developed, integrating sensor and stimulation technologies to improve cellular responses, such as proliferation and differentiation. The variability in bioreactor design, stimulation protocols, and cell culture conditions hampered comparison and replicability, possibly hiding biological evidence. This work proposes an open-source 3D printable design for a perfusion bioreactor and a numerical model-driven protocol development strategy for improved cell culture control. This bioreactor can simultaneously deliver capacitive-coupled electric field and fluid-induced shear stress stimulation, both stimulation systems were validated experimentally and in agreement with numerical predictions. A preliminary in vitro validation confirmed the suitability of the developed bioreactor to sustain viable cell cultures. The outputs from this strategy, physical and virtual, are openly available and can be used to improve comparison, replicability, and control in tissue engineering applications.

Perfusion in vivo bioreactor promotes regeneration of vascularized tissue-engineered bone

Aim: This study improved the in vivo bioreactor (IVB) for bone regeneration by enhancing stem cell survival and promoting vascularized tissue-engineered bone. Methods: 12 New Zealand rabbits received β-TCP scaffolds with rabbit bone mesenchymal stem cells (BMSCs) implanted. Perfusion IVB with a perfusion electronic pump was compared with the control group using micro-CT, Microfil perfusion, histological staining and RT-PCR for gene expression. Results: Perfusion IVB demonstrated good biocompatibility, increased neoplastic bone tissue, neovascularization and upregulated osteogenic and angiogenesis-related genes in rabbits (p < 0.05). Conclusion: Perfusion IVB holds promise for bone regeneration and tissue engineering in orthopedics and maxillofacial surgery.

Flourishing tumor organoids: History, emerging technology, and application

Malignant tumors are one of the leading causes of death which impose an increasingly heavy burden on all countries. Therefore, the establishment of research models that closely resemble original tumor characteristics is crucial to further understanding the mechanisms of malignant tumor development, developing safer and more effective drugs, and formulating personalized treatment plans. Recently, organoids have been widely used in tumor research owing to their advantages including preserving the structure, heterogeneity, and cellular functions of the original tumor, together with the ease of manipulation. This review describes the history and characteristics of tumor organoids and the synergistic combination of three-dimensional (3D) culture approaches for tumor organoids with emerging technologies, including tissue-engineered cell scaffolds, microfluidic devices, 3D bioprinting, rotating wall vessels, and clustered regularly interspaced short palindromic repeats-CRISPR-associated protein 9 (CRISPR-Cas9). Additionally, the progress in research and the applications in basic and clinical research of tumor organoid models are summarized. This includes studies of the mechanism of tumor development, drug development and screening, precision medicine, immunotherapy, and simulation of the tumor microenvironment. Finally, the existing shortcomings of tumor organoids and possible future directions are discussed.

Human Bone-Marrow-Derived Stem-Cell-Seeded 3D Chitosan-Gelatin-Genipin Scaffolds Show Enhanced Extracellular Matrix Mineralization When Cultured under a Perfusion Flow in Osteogenic Medium

Tissue-engineered bone tissue grafts are a promising alternative to the more conventional use of natural donor bone grafts. However, choosing an appropriate biomaterial/scaffold to sustain cell survival, proliferation, and differentiation in a 3D environment remains one of the most critical issues in this domain. Recently, chitosan/gelatin/genipin (CGG) hybrid scaffolds have been proven as a more suitable environment to induce osteogenic commitment in undifferentiated cells when doped with graphene oxide (GO). Some concern is, however, raised towards the use of graphene and graphene-related material in medical applications. The purpose of this work was thus to check if the osteogenic potential of CGG scaffolds without added GO could be increased by improving the medium diffusion in a 3D culture of differentiating cells. To this aim, the level of extracellular matrix (ECM) mineralization was evaluated in human bone-marrow-derived stem cell (hBMSC)-seeded 3D CGG scaffolds upon culture under a perfusion flow in a dedicated custom-made bioreactor system. One week after initiating dynamic culture, histological/histochemical evaluations of CGG scaffolds were carried out to analyze the early osteogenic commitment of the culture. The analyses show the enhanced ECM mineralization of the 3D perfused culture compared to the static counterpart. The results of this investigation reveal a new perspective on more efficient clinical applications of CGG scaffolds without added GO.