Solar Fuels by Heterogeneous Photocatalysis: From Understanding Chemical Bases to Process Development

Biocompatible PANI-Encapsulated Chemically Modified Nano-TiO2 Particles for Visible-Light Photocatalytic Applications

Polyaniline (PANI) constitutes a very propitious conductive polymer utilized in several biomedical, as well as environmental applications, including tissue engineering, catalysis, and photocatalysis, due to its unique properties. In this study, nano-PANI/N-TiO2 and nano-PANI/Ag-TiO2 photocatalytic composites were fabricated via aniline's oxidative polymerization, while the Ag-and N-chemically modified TiO2 nanopowders were synthesized through the sol-gel approach. All produced materials were fully characterized. Through micro-Raman and FT-IR analysis, the co-existence of PANI and chemically modified TiO2 particles was confirmed, while via XRD analysis the composites' average crystallite size was determined as ≈20 nm. The semi-crystal structure of polyaniline exhibits higher photocatalytic efficiency compared to that of other less crystalline forms. The spherical-shaped developed materials are innovative, stable (zeta potential in the range from -26 to -37 mV), and cost-effective, characterized by enhanced photocatalytic efficiency under visible light (energy band gaps ≈ 2 eV), and synthesized with relatively simple methods, with the possibility of recycling and reusing them in potential future applications in industry, in wastewater treatment as well as in biomedicine. Thus, the PANI-encapsulated Ag and N chemically modified TiO2 nanocomposites exhibit high degradation efficiency towards Rhodamine B dye upon visible-light irradiation, presenting simultaneously high biocompatibility in different normal cell lines.

Depolymerization of lignin: Recent progress towards value-added chemicals and biohydrogen production

The need for alternative sources of energy became increasingly urgent as demand for energy and the use of fossil fuels both soared. When processed into aromatic compounds, lignin can be utilized as an alternative to fossil fuels, however, lignin's complex structure and recalcitrance make depolymerization impractical. This article presented an overview of the most recent advances in lignin conversion, including process technology, catalyst advancement, and case study-based end products. In addition to the three established methods (thermochemical, biochemical, and catalytic depolymerization), a lignin-first strategy was presented. Depolymerizing different forms of lignin into smaller phenolic molecules has been suggested using homogeneous and heterogeneous catalysts for oxidation or reduction. Limitations and future prospects of lignin depolymerization have been discussed which suggests that solar-driven catalytic depolymerization through photocatalysts including quantum dots offers a unique pathway to obtain the highly catalytic conversion of lignin.

Structural and Functional Behaviour of Ce-Doped Wide-Bandgap Semiconductors for Photo-Catalytic Applications

Increasing the photocatalytic efficiency of earth-abundant wide-bandgap semiconductors is of high interest for the development of cheap but effective light-driven chemical conversion processes. In this study, the coupling of ZnO and TiO2 with low contents of the rare-earth Ce species aimed to assess the photo-catalytic performance of the two semiconductors (SC). Structural and optical characterizations were performed to estimate the effect of the different interactions between Zn2+, Ti4+ and Ce4+ ions, and how the photo-responsive behaviour of Ce-Ti and Ce-Zn composites was affected. Therefore, photo-catalytic tests were performed for all Ce-modified SC to assess both their photo-oxidative and photo-reductive properties. Amongst all the tested materials, only Zn-based samples resulted in being suitable for the photo-oxidation of the methylene blue (MB) organic pollutant in a synthetic-dependent fashion.

Heterogeneous Photocatalysis

Heterogeneous photocatalysis is a subtype of catalysis that refers to chemical processes catalysed by a semiconductor solid under proper illumination conditions [...]

Photoreforming of Glucose over CuO/TiO2

Hydrogen production has been investigated through the photoreforming of glucose, as model molecule representative for biomass hydrolysis. Different copper- or nickel-loaded titania photocatalysts have been compared. The samples were prepared starting from three titania samples, prepared by precipitation and characterized by pure Anatase with high surface area, or prepared through flame synthesis, i.e., flame pyrolysis and the commercial P25, leading to mixed Rutile and Anatase phases with lower surface area. The metal was added in different loading up to 1 wt % following three procedures that induced different dispersion and reducibility to the catalyst. The highest activity among the bare semiconductors was exhibited by the commercial P25 titania, while the addition of 1 wt % CuO through precipitation with complexes led to the best hydrogen productivity, i.e., 9.7 mol H2/h kgcat. Finally, a basic economic analysis considering only the costs of the catalyst and testing was performed, suggesting CuO promoted samples as promising and almost feasible for this application.

Titanium Dioxide-Based Nanocomposites for Enhanced Gas-Phase Photodehydrogenation

Light-driven processes can be regarded as a promising technology for chemical production within the bio-refinery concept, due to the very mild operative conditions and high selectivity of some reactions. In this work, we report copper oxide (CuO)-titanium dioxide (TiO₂) nanocomposites to be efficient and selective photocatalysts for ethanol photodehydrogenation under gas phase conditions, affording 12-fold activity improvement compared to bare TiO₂. In particular, the insertion method of the CuO co-catalyst in different TiO₂ materials and its effects on the photocatalytic activity were studied. The most active CuO co-catalyst was observed to be highly dispersed on titania surface, and highly reducible. Moreover, such high dispersion was observed to passivate some surface sites where ethanol is strongly adsorbed, thus improving the activity. This kind of material can be obtained by the proper selection of loading technique for both co-catalysts, allowing a higher coverage of photocatalyst surface (complex-precipitation in the present work), and the choice of titania material itself. Loading copper on a high surface area titania was observed to afford a limited ethanol conversion, due to its intrinsically higher reactivity affording to a strong interaction with the co-catalyst.

Systematic study of TiO2/ZnO mixed metal oxides for CO2 photoreduction

A novel example using a systematic design of experiments mixture design for developing mixed metal oxide photocatalysts for CO₂ photoreduction.