Development of an Electrochemical Sensor for NADH Determination Based on a Caffeic Acid Redox Mediator Supported on Carbon Black

Polytyrosine-Coated Paper Electrode for Sensitive and Selective Sensing of NADH

Reduced nicotinamide adenine dinucleotide (NADH)-detecting electrochemical sensors are attractive in monitoring and diagnosing various physiological disorders of NADH abnormalities. The NADH detection methods using conventional electrodes are challenging due to slow electron transfer and fouling effect. Interestingly, paper-based flexible and disposable electrodes (PE) are superior for sensing biomolecules through simple detection procedures with excellent sensitivity and selectivity. Herein, to construct a conducting polypeptide-modified paper electrode, initially, polytyrosine (PTyr) is synthesized from l-tyrosine N-carboxy anhydride through ring-opening polymerization, and PTyr is drop-coated on the PE. The PTyr-modified paper electrode (PMPE) demonstrated excellent electrochemical properties and facilitated the electrooxidation of NADH at a lower potential of 576 mV. The PMPE displayed a linear detection between 25 and 145 μM of NADH concentration, with a lower detection limit of 0.340 μM. Under ideal circumstances, the sensor developed displayed an excellent NADH detection capability without interference with the most common electroactive species, ascorbic acid. The PMPE facilitates good electrocatalytic activity toward NADH, which can also be employed as a substrate material for biofuel cells.

Layer-by-Layer Combination of MWCNTs and Poly(ferulic acid) as Electrochemical Platform for Hesperidin Quantification

The electrochemical polymerization of suitable monomers is a powerful way to create voltammetric sensors with improved responses to a target analyte. Nonconductive polymers based on phenolic acids were successfully combined with carbon nanomaterials to obtain sufficient conductivity and high surface area of the electrode. Glassy carbon electrodes (GCE) modified with multi-walled carbon nanotubes (MWCNTs) and electropolymerized ferulic acid (FA) were developed for the sensitive quantification of hesperidin. The optimized conditions of FA electropolymerization in basic medium (15 cycles from -0.2 to 1.0 V at 100 mV s^-1 in 250 µmol L^-1 monomer solution in 0.1 mol L^-1 NaOH) were found using the voltammetric response of hesperidin. The polymer-modified electrode exhibited a high electroactive surface area (1.14 ± 0.05 cm² vs. 0.75 ± 0.03 and 0.089 ± 0.003 cm² for MWCNTs/GCE and bare GCE, respectively) and decreased in the charge transfer resistance (21.4 ± 0.9 kΩ vs. 72 ± 3 kΩ for bare GCE). Under optimized conditions, hesperidin linear dynamic ranges of 0.025-1.0 and 1.0-10 µmol L^-1 with a detection limit of 7.0 nmol L^-1 were achieved, which were the best ones among those reported to date. The developed electrode was tested on orange juice and compared with chromatography.

Using nanostructured carbon black-based electrochemical (bio)sensors for pharmaceutical and biomedical analyses: A comprehensive review

The outstanding electronic properties of carbon black (CB) and its economic advantages have fueled its application as nanostructured electrode material for the development of new electrochemical sensors and biosensors. CB-based electrochemical sensing devices have been found to exhibit high surface area, fast charge transfer kinetics, and excellent functionalization. In the present work, we set forth a comprehensive review of the recent advances made in the development and application of CB-based electrochemical devices for pharmaceutical and biomedical analyses - from quantitative monitoring of drug formulations to clinical diagnoses - and the underlying challenges and constraints that need to be overcome. We also present a thorough discussion about the strategies and techniques employed in the development of new electrochemical sensing platforms and in the enhancement of their analytical properties and biocompatibility for anchoring active biomolecules, as well as the combination of these sensing devices with other materials aiming at boosting the performance and efficiency of the sensors.

Modular graphene mediator film-based electrochemical pocket device for chlorpyrifos determination

In this work, a redox-graphene (Rx-Gr) film with electron-mediating ability has been integrated into a modular flexible pocket device, giving rise to a reusable biosensing platform. The Rx-Gr has been obtained in water from graphite taking advantage of catechin, a redox-antioxidant, able to assist the sonochemical layered-material exfoliation, conferring electron mediating feature. A film composed exclusively of Rx-Gr has been transferred via thermal rolling onto a flexible PET-support that was used as the biosensor base. The biosensing platform, composed of office-grade materials, was then fabricated using a cutter-plotter and assembled by thermal lamination; an interchangeable paper-based strip was used to host the enzymatic reaction and drive the capillary flow. An acetylcholinesterase-based inhibition assay has been optimized onboard the pocket device to determine chlorpyriphos, a widespread environmental pesticide. The proposed set-up allows the determination of chlorpyriphos at low overpotential (0.2 V) with satisfactory sensitivity (LOD = 0.2 ppb), thanks to the straightforward electroactivity of the Rx-Gr film towards thiocholine (enzymatic product). The modular design allows 5 consecutive complete inhibition assays (control + inhibition measure) retaining the performance (RSD = 5.4%; n = 5). The coupling of bench-top technologies and a new functional graphene film resulted in the development of a cost-effective, reusable, transportable, and within everyone's reach biosensing platform.

Electrochemical Sensors Based on the Electropolymerized Natural Phenolic Antioxidants and Their Analytical Application

The design and fabrication of novel electrochemical sensors with high analytical and operational characteristics are one of the sustainable trends in modern analytical chemistry. Polymeric film formation by the electropolymerization of suitable monomers is one of the methods of sensors fabrication. Among a wide range of the substances able to polymerize, the phenolic ones are of theoretical and practical interest. The attention is focused on the sensors based on the electropolymerized natural phenolic antioxidants and their analytical application. The typical electropolymerization reaction schemes are discussed. Phenol electropolymerization leads to insulating coverage formation. Therefore, a combination of electropolymerized natural phenolic antioxidants and carbon nanomaterials as modifiers is of special interest. Carbon nanomaterials provide conductivity and a high working surface area of the electrode, while the polymeric film properties affect the selectivity and sensitivity of the sensor response for the target analyte or the group of structurally related compounds. The possibility of guided changes in the electrochemical response for the improvement of target compounds' analytical characteristics has appeared. The analytical capabilities of sensors based on electropolymerized natural phenolic antioxidants and their future development in this field are discussed.

(+)-Catechin-assisted graphene production by sonochemical exfoliation in water. A new redox-active nanomaterial for electromediated sensing

A new green and effective sonochemical liquid-phase exfoliation (LPE) is proposed wherein a flavonoid compound, catechin (CT), promotes the formation of conductive, redox-active, water-phase stable graphene nanoflakes (GF). To maximize the GF-CT redox activity, the CT concentration and sonication time have been studied, and the best performing nanomaterial-fraction selected. Physicochemical and electrochemical methods have been employed to characterize the morphological, structural, and electrochemical features of the GF-CT nanoflakes. The obtained GF intercalated with CT exhibits fully reversible electrochemistry (ΔEp = 28 mV, ipa/ipc = ⁓1) because of the catecholic adducts. GF-CT-integrated electrochemistry was generated directly during LPE of graphite, with no need of graphene oxide production, nor activation steps, electropolymerization, or ex-post functionalization. The GF-CT electro-mediator ability has been proven towards hydrazine (HY) and β-nicotinamide adenine dinucleotide (NADH) by simply drop-casting the redox-material onto screen-printed electrodes. GF-CT-based electrodes by using amperometry exhibited high sensitivity and extended linear ranges (HY: LOD = 0.1 µM, L.R. 0.5-150 µM; NADH: LOD = 0.6 µM, L.R. 2.5-200 µM) at low overpotential (+ 0.15 V) with no electrode fouling. The GF-CT electrodes are performing significantly better than commercial graphite electrodes and graphene nanoflakes exfoliated with a conventional surfactant, such as sodium cholate. Recoveries of 94-107% with RSD ≤ 8% (n = 3) for determination of HY and NADH in environmental and biological samples were achieved, proving the material functionality also in challenging analytical media. The presented GF-CT is a new functional redox-active material obtainable with a single-pot sustainable strategy, exhibiting standout properties particularly prone to (bio)sensors and cutting-edge device development.

Voltamperometric Sensors and Biosensors Based on Carbon Nanomaterials Used for Detecting Caffeic Acid-A Review

Caffeic acid is one of the most important hydroxycinnamic acids found in various foods and plant products. It has multiple beneficial effects in the human body such as antioxidant, antibacterial, anti-inflammatory, and antineoplastic. Since overdoses of caffeic acid may have negative effects, the quality and quantity of this acid in foods, pharmaceuticals, food supplements, etc., needs to be accurately determined. The present paper analyzes the most representative scientific papers published mostly in the last 10 years which describe the development and characterization of voltamperometric sensors or biosensors based on carbon nanomaterials and/or enzyme commonly used for detecting caffeic acid and a series of methods which may improve the performance characteristics of such sensors.

Carbon nanohorn modified platinum electrodes for improved immobilisation of enzyme in the design of glutamate biosensors

Electrochemical enzymatic biosensors are the subject of research due to their potential for in vivo monitoring of glutamate, which is a key neurotransmitter whose concentration is related to healthy brain function. This study reports the use of biocompatible oxidised carbon nanohorns (o-CNH) with a high surface area, to enhance the immobilization of glutamate oxidase (GluOx) for improved biosensor performance. Two families of biosensors were designed to interact with the anionic GluOx. Family-1 consists of covalently functionalised o-CNH possessing hydrazide (HYZ) and amine (PEG-NH2) terminated surfaces and Family-2 comprised non-covalently functionalised o-CNH with different loadings of polyethyleneimine (PEI) to form a cationic hybrid. Amperometric detection of H2O2 formed by enzymatic oxidation of glutamate revealed a good performance from all designs with the most improved performance by the PEI hybrid systems. The best response was from a o-CNH : PEI ratio of 1 : 10 mg mL-1, which yielded a glutamate calibration plateau, JMAX, of 55 ± 9 μA cm-2 and sensitivity of 111 ± 34 μA mM-1 cm-2. The low KM of 0.31 ± 0.05 mM indicated the retention of the enzyme function, and a limit of detection of 0.02 ± 0.004 μM and a response time of 0.88 ± 0.13 s was determined. The results demonstrate the high sensitivity of these biosensors and their potential for future use for the detection of glutamate in vivo.

Single-Walled Carbon Nanotubes as Enhancing Substrates for PNA-Based Amperometric Genosensors

A new amperometric sandwich-format genosensor has been implemented on single-walled carbon nanotubes screen printed electrodes (SWCNT-SPEs) and compared in terms of performance with analogous genoassays developed using the same methodology on non-nanostructured glassy carbon platforms (GC-SPE). The working principle of the genosensors is based on the covalent immobilization of Peptide Nucleic Acid (PNA) capture probes (CP) on the electrode surface, carried out through the carboxylic functions present on SWCNT-SPEs (carboxylated SWCNT) or electrochemically induced on GC-SPEs. The sequence of the CP was complementary to a 20-mer portion of the target DNA; a second biotin-tagged PNA signalling probe (SP), with sequence complementary to a different contiguous portion of the target DNA, was used to obtain a sandwich hybrid with an Alkaline Phosphatase-streptavidin conjugate (ALP-Strp). Comparison of the responses obtained from the SWCNT-SPEs with those produced from the non-nanostructured substrates evidenced the remarkable enhancement effect given by the nanostructured electrode platforms, achieved both in terms of loading capability of PNA probes and amplification of the electron transfer phenomena exploited for the signal transduction, giving rise to more than four-fold higher sensitivity when using SWCNT-SPEs. The nanostructured substrate allowed to reach limit of detection (LOD) of 71 pM and limit of quantitation (LOQ) of 256 pM, while the corresponding values obtained with GC-SPEs were 430 pM and 1.43 nM, respectively.

A Flexible Platform of Electrochemically Functionalized Carbon Nanotubes for NADH Sensors

A flexible electrode system entirely constituted by single-walled carbon nanotubes (SWCNTs) has been proposed as the sensor platform for β-nicotinamide adenine dinucleotide (NADH) detection. The performance of the device, in terms of potential at which the electrochemical process takes place, significantly improves by electrochemical functionalization of the carbon-based material with a molecule possessing an o-hydroquinone residue, namely caffeic acid. Both the processes of SWCNT functionalization and NADH detection have been studied by combining electrochemical and spectroelectrochemical experiments, in order to achieve direct evidence of the electrode modification by the organic residues and to study the electrocatalytic activity of the resulting material in respect to functional groups present at the electrode/solution interface. Electrochemical measurements performed at the fixed potential of +0.30 V let us envision the possible use of the device as an amperometric sensor for NADH detection. Spectroelectrochemistry also demonstrates the effectiveness of the device in acting as a voltabsorptometric sensor for the detection of this same analyte by exploiting this different transduction mechanism, potentially less prone to the possible presence of interfering species.

Single-walled carbon nanotubes covalently functionalized with polytyrosine: A new material for the development of NADH-based biosensors

We report for the first time the use of single-walled carbon nanotubes (SWCNT) covalently functionalized with polytyrosine (Polytyr) (SWCNT-Polytyr) as a new electrode material for the development of nicotinamide adenine dinucleotide (NADH)-based biosensors. The oxidation of glassy carbon electrodes (GCE) modified with SWCNT-Polytyr at potentials high enough to oxidize the tyrosine residues have allowed the electrooxidation of NADH at low potentials due to the catalytic activity of the quinones generated from the primary oxidation of tyrosine without any additional redox mediator. The amperometric detection of NADH at 0.200V showed a sensitivity of (217±3)µAmM(-1)cm(-2) and a detection limit of 7.9nM. The excellent electrocatalytic activity of SWCNT-Polytyr towards NADH oxidation has also made possible the development of a sensitive ethanol biosensor through the immobilization of alcohol dehydrogenase (ADH) via Nafion entrapment, with excellent analytical characteristics (sensitivity of (5.8±0.1)µAmM(-1)cm(-2), detection limit of 0.67µM) and very successful application for the quantification of ethanol in different commercial beverages.

Conducting polymer and its composite materials based electrochemical sensor for Nicotinamide Adenine Dinucleotide (NADH)

Nicotinamide Adenine Dinucleotide (NADH) is an important coenzyme in the human body that participates in many metabolic reactions. The impact of abnormal concentrations of NADH significantly causes different diseases in human body. Electrochemical detection of NADH using bare electrode is a challenging task especially in the presence of main electroactive interferences such as ascorbic acid (AA), uric acid (UA) and dopamine (DA). Modified electrodes have been widely explored to overcome the problems of poor sensitivity and selectivity occurred from bare electrodes. This review gives an overview on the progress of using conducting polymers, polyelectrolyte and its composites (co-polymer, carbonaceous, metal, metal oxide and clay) based modified electrodes for the sensing of NADH. In addition, developments on the fabrication of numerous conducting polymer composites based modified electrodes are clearly described.