Raman Spectroscopy as an Assay to Disentangle Zinc Oxide Carbon Nanotube Composites for Optimized Uric Acid Detection

Asterias forbesi-Inspired SERS Substrates for Wide-Range Detection of Uric Acid

Uric acid (UA), the final metabolite of purine, is primarily excreted through urine to maintain an appropriate concentration in the bloodstream. However, any malfunction in this process can lead to complications due to either deficiency or excess amount of UA. Hence, the development of a sensor platform with a wide-range detection is crucial. To realize this, we fabricated a surface-enhanced Raman spectroscopy (SERS) substrate inspired by a type of starfish with numerous protrusions, Asterias forbesi. The Asterias forbesi-inspired SERS (AF-SERS) substrate utilized an Au@Ag nanostructure and gold nanoparticles to mimic the leg and protrusion morphology of the starfish. This substrate exhibited excellent Raman performance due to numerous hotspots, demonstrating outstanding stability, reproducibility, and repeatability. In laboratory settings, we successfully detected UA down to a concentration of 1.16 nM (limit of detection) and demonstrated selectivity against various metabolites. In the experiments designed for real-world application, the AF-SERS substrate detected a broad range of UA concentrations, covering deficiencies and excesses, in both serum and urine samples. These results underscore the potential of the developed AF-SERS substrate as a practical detection platform for UA in real-world applications.

ZnO and AZO Film Potentiometric pH Sensors Based on Flexible Printed Circuit Board

In this study, we deposited zinc oxide (ZnO) and aluminum-doped zinc oxide (AZO) on the electroless nickel immersion gold (ENIG) of a flexible printed circuit board (FPCB) as a potentiometric pH sensor. The sensing films of the pH sensor were fabricated by a radio frequency (RF) sputtering system and analyzed by field emission scanning electron microscope (FE-SEM) and X-ray photoelectron spectroscopy (XPS). In the pH 2 to 10 buffer solutions, it was observed that the characteristics of the pH sensor through the voltage–time (V-T) measurement system include average sensitivity and linearity, drift effect, and repeatability. According to the experimental results, the pH sensors in this study could exhibit good characteristics.

Carbon Nanotubes, Graphene, and Carbon Dots as Electrochemical Biosensing Composites

Carbon nanomaterials (CNMs) have been extensively used as electrochemical sensing composites due to their interesting chemical, electronic, and mechanical properties giving rise to increased performance. Due to these materials' unknown long-term ecological fate, care must be given to make their use tractable. In this review, the design and use of carbon nanotubes (CNTs), graphene, and carbon dots (CDs) as electrochemical sensing electrocatalysts applied to the working electrode surface are surveyed for various biosensing applications. Graphene and CDs are readily biodegradable as compared to CNTs. Design elements for CNTs that carry over to graphene and CDs include Coulombic attraction of components and using O or N atoms that serve as tethering points for attaching electrocatalytically active nanoparticles (NPs) and/or other additives.

Antioxidant Determination with the Use of Carbon-Based Electrodes

Antioxidants are compounds that prevent or delay the oxidation process, acting at a much smaller concentration, in comparison to that of the preserved substrate. Primary antioxidants act as scavenging or chain breaking antioxidants, delaying initiation or interrupting propagation step. Secondary antioxidants quench singlet oxygen, decompose peroxides in non-radical species, chelate prooxidative metal ions, inhibit oxidative enzymes. Based on antioxidants’ reactivity, four lines of defense have been described: Preventative antioxidants, radical scavengers, repair antioxidants, and antioxidants relying on adaptation mechanisms. Carbon-based electrodes are largely employed in electroanalysis given their special features, that encompass large surface area, high electroconductivity, chemical stability, nanostructuring possibilities, facility of manufacturing at low cost, and easiness of surface modification. Largely employed methods encompass voltammetry, amperometry, biamperometry and potentiometry. Determination of key endogenous and exogenous individual antioxidants, as well as of antioxidant activity and its main contributors relied on unmodified or modified carbon electrodes, whose analytical parameters are detailed. Recent advances based on modifications with carbon-nanotubes or the use of hybrid nanocomposite materials are described. Large effective surface area, increased mass transport, electrocatalytical effects, improved sensitivity, and low detection limits in the nanomolar range were reported, with applications validated in complex media such as foodstuffs and biological samples.

A Cobalt (II) Oxide Carbon Nanotube Composite to Assay Dopamine

A cobalt (II) oxide/carboxylic acid functionalized multiwalled carbon nanotube (CoO/COOH-MWNT) composite was fabricated for the biochemical detection of dopamine (DA). CoO particles were tethered to COOH-MWNTs by sonication. The current response versus different concentration was measured using cyclic voltammetry. Various parameters, including sonication time, pH, and loading were varied for the best current response. The composite with optimum current response was formed using a 30-min sonication time, at pH 5.0 and a 0.89 µg/mm2 loading onto the glassy carbon electrode surface. Good sensitivity with a limit of detection of 0.61 ± 0.03 μM, and dynamic range of 10–100 µM for DA is shown, applicable for neuroblastoma screening. The sensor was selective against ascorbic and uric acids.

A Prussian Blue ZnO Carbon Nanotube Composite for Chronoamperometrically Assaying H2O2 in BT20 and 4T1 Breast Cancer Cells

A Prussian Blue (PB) zinc oxide carbon nanotube sensing composite was developed for the rapid assaying of H₂O₂ generated from BT20 and 4T1 breast cancer cells, important for elucidating mechanisms governing apoptosis of these cell lines. The combination of H₂O₂'s transient nature along with matrix effects makes monitoring this molecule in biological samples a challenge. The standard addition method (SAM) was coupled with chronoamperometric sensing (CA) to overcome these obstacles. An electrocatalyst composite consisting of refluxed zinc oxide nanoparticles (NPs) tethered to carboxylic acid-functionalized multiwalled carbon nanotubes (ZnO/COOH-MWNTs) was electrostatically attached to PB for signal enhancement. Optimization of the sensor was achieved via adjusting solution pH and stirring time to optimize PB electrostatic attachment to ZnO/COOH-MWNTs prior to its deposition onto the working glassy carbon electrode (GCE) surface. CA SAM showed the ability to accurately measure H₂O₂ within the 1-21 μM range, suitable for monitoring cancer cell line apoptosis resistance scenarios and offering analytical advantages over standard enzyme-linked immunosorbent assays (ELISA) for rapid, matrix-effect-free analysis.