Bi2S3/rGO Composite Based Electrochemical Sensor for Ascorbic Acid Detection

CeO2·ZnO@biomass-derived carbon nanocomposite-based electrochemical sensor for efficient detection of ascorbic acid

Ascorbic acid (AA), a prominent antioxidant commonly found in human blood serum, serves as a biomarker for assessing oxidative stress levels. Therefore, precise detection of AA is crucial for swiftly diagnosing conditions arising from abnormal AA levels. Consequently, the primary aim of this research is to develop a sensitive and selective electrochemical sensor for accurate AA determination. To accomplish this aim, we used a novel nanocomposite comprised of CeO2-doped ZnO adorned on biomass-derived carbon (CeO2·ZnO@BC) as the active nanomaterial, effectively fabricating a glassy carbon electrode (GCE). Various analytical techniques were employed to scrutinize the structure and morphology features of the CeO2·ZnO@BC nanocomposite, ensuring its suitability as the sensing nanomaterial. This innovative sensor is capable of quantifying a wide range of AA concentrations, spanning from 0.5 to 1925 μM in a neutral phosphate buffer solution. It exhibits a remarkable sensitivity of 0.2267 μA μM-1cm-2 and a practical detection limit of 0.022 μM. Thanks to its exceptional sensitivity and selectivity, this sensor enables highly accurate determination of AA concentrations in real samples. Moreover, its superior reproducibility, repeatability, and stability underscore its reliability and robustness for AA quantification.

Nano-palladium-decorated bismuth sulfide microspheres on a disposable electrode integrated with smartphone-based electrochemical detection of nitrite in food samples

Nitrite (NO2-) is widely used as an additive to extend the shelf life of food products. Excessive nitrite intake not only causes blood-related diseases but also has the potential risk of causing cancers. A disposable screen-printed electrode was modified with nano‑palladium decorated bismuth sulfide microspheres (nanoPd@Bi2S3MS/SPE), and integrated with a smartphone-interfaced potentiostat to develop a portable, electrochemical nitrite sensor. NanoPd@Bi2S3MS was prepared by the hydrothermal reduction of a Bi2S3MS and Pd2+ dispersion and drop cast on the SPE. The nanoPd@Bi2S3MS/SPE was coupled with a smartphone-controlled portable potentiostat and applied to determine nitrite in food samples. The linear range of the sensor was 0.01-500 μM and the limit of detection was 0.0033 μM. The proposed system showed good repeatability, reproducibility, catalytic stability, and immunity to interferences. The proposed electrode material and a smartphone-based small potentiostat created a simple, portable, fast electrochemical sensing system that accurately measured nitrite in food samples.

Nanolevel of detection of ascorbic acid using horse-radish peroxidase inhibition assay

Ascorbic acid plays a significant role in regulation of various bodily functions with high concentrations in immune cells and being involved in connective tissue maintenance. Commonly it is detected through various colorimetric methods. In this study, we propose a one-step simple method based on the inhibitory activity of ascorbic acid on horseradish peroxidase and hydrogen peroxide. The detection is observed by colorimetric changes to TMB (3,3',5,5' tetramethylbenzidine). The enzyme inhibition unit was optimized with a high level of linearity (r2 = 0.9999) and the level of detection and level of quantification were found to be 1.35 nM and 4.08 nM, respectively with higher sensitive compared to the HPLC method (11 μM). Both intra and inter-assays showed high correlations at different AA concentrations. (r2 > 0.9999). Similar results were also observed for vitamin C tablets, ascorbate salts, fruits, and market products (r2 = 0.999). There was negligible effect of interference by citric acid, lactic acid, tartaric acids, and glucose with high recoveries (>98%) at 1 mg/mL to 0.0078 mg/mL concentration ranges. The recovery error (RE%) was found to be less than 10%. Our detection method is distinguished by its simplicity, nano-level of detection, reproducibility, and potential application and adaptability as a point-of-use test.

High green index electromagnetic interference shields with semiconducting Bi2S3 fillers in a PEDOT:PSS matrix

Conventional metallic electromagnetic interference (EMI) shields, as well as the emerging 2D material-based shields, meet the shielding effectiveness (SE) needs of most applications. However, their shielding performance is dominated by the reflection of incoming radiation due to their high electrical conductivity, which leads to secondary pollution. This problem is getting exacerbated with the proliferation of electronics and communication networks in modern society. Thus, EMI shields that function dominantly by the absorption of incoming radiation are highly desirable. Such shields would be characterized by a green index, which is the ratio of absorbance over reflectance, close to or greater than one. For nonmagnetic materials, the best way to reduce the undesirable large impedance mismatch is to reduce the effective permittivity of the shield material. Here, we present a new EMI shield with a semiconductor Bi2S3 filler in a conducting PEDOT:PSS polymer matrix, instead of the conventional conductive fillers, to reduce the effective permittivity and demonstrate that even a light loading of only 10% Bi2S3 provides high SE of over 40 dB with a green index value of 0.75. Increasing the filler content to 15 wt% increases the green index close to unity while dropping the SE to 30 dB. The shielding mechanism is explained through electromagnetic parameter measurements and supplemented by density functional theory calculations. This work lays the foundation for the advancement of lightweight and ultrathin green EMI shields with minimum secondary pollution.

The "dual-layer sulfur cathode" strategy: An In2S3/Bi2S3@rGO heterostructure as an interlayer/modified separator for boosting the areal capacities of lithium-sulfur batteries

The specific energies and energy densities of lithium-sulfur (Li-S) batteries are influenced by various cell parameters, including the sulfur loading, the sulfur weight percentage in the cathode, and the electrolyte/sulfur ratio. An In2S3/Bi2S3@rGO heterostructure was obtained by growing indium sulfide nanoparticles on the surface of bismuth sulfide nanoflowers in a graphene oxide (GO) solution via a one-step solvothermal approach. This structure was introduced as a modified separator/dual-layer sulfur cathode for Li-S batteries. The Bi2S3/In2S3 heterointerfaces act as active sites to speed up interfacial electron transfer, along with the entrapment, diffusion, and transformation of lithium polysulfides. A Li-S cell containing a dual-layer sulfur cathode (thin layer of In2S3/Bi2S3@rGO sandwiched between two thick layers of sulfur) and coupled with an In2S3/Bi2S3@rGO-coated separator suppressed the polysulfide shuttle effect. The cell based on the dual-layer sulfur cathode technology and operated at a current rate of 0.3C achieved a high capacity (7.1 mAh cm-2) after the 200th cycle, giving an electrolyte/sulfur ratio (10 µL mg-1) under a high sulfur loading (11.53 mg cm-2). These results demonstrate the unique nature of the dual-layer sulfur cathode technique, which can yield high energy density Li-S batteries with high sulfur loadings and low electrolyte/sulfur ratios.

Low Overpotential Amperometric Sensor Using Yb2O3.CuO@rGO Nanocomposite for Sensitive Detection of Ascorbic Acid in Real Samples

The ultimate objective of this research work is to design a sensitive and selective electrochemical sensor for the efficient detection of ascorbic acid (AA), a vital antioxidant found in blood serum that may serve as a biomarker for oxidative stress. To achieve this, we utilized a novel Yb₂O₃.CuO@rGO nanocomposite (NC) as the active material to modify the glassy carbon working electrode (GCE). The structural properties and morphological characteristics of the Yb₂O₃.CuO@rGO NC were investigated using various techniques to ensure their suitability for the sensor. The resulting sensor electrode was able to detect a broad range of AA concentrations (0.5-1571 µM) in neutral phosphate buffer solution, with a high sensitivity of 0.4341 µAµM^-1cm^-2 and a reasonable detection limit of 0.062 µM. The sensor's great sensitivity and selectivity allowed it to accurately determine the levels of AA in human blood serum and commercial vitamin C tablets. It demonstrated high levels of reproducibility, repeatability, and stability, making it a reliable and robust sensor for the measurement of AA at low overpotential. Overall, the Yb₂O₃.CuO@rGO/GCE sensor showed great potential in detecting AA from real samples.

Integration of Bismuth sulfide/functionalized halloysite nanotube composite: An electrochemical tool for diethofencarb analysis

Diethofencarb (DFC) is a fungicide used in agricultural fields and it's overe use makes a negative impact in the real-time environment. Here in this work, a semi-conductive urchin like Bismuth sulfide (Bi₂S₃) anchored with tubular structure functionalized halloysite nanotube (F-HNT) was hydrothermally synthesized and used for the electrochemical detection of DFC. Various analytical and microscopic techniques were used to analyze the structure, crystalline nature, and purity of the as-prepared F-HNT@Bi₂S₃. Moreover, the cyclic voltammetry technique was used to analyze the electrochemical studies of the F-HNT@Bi₂S₃ modified glassy carbon electrode (GCE). A high synergetic relationship between the Bi₂S₃ and F-HNT provides a large surface area and better detection of DFC. The amperometry i-t technique result shows that the prepared composite exhibits a wide linear range of 0.0053-526.62 μg L^-1, a low detection limit of 0.0032 μg L^-1, and very good stability over 2000 s. Notably, our proposed sensor can determine the DFC spiked tomato and water samples with a high recovery range and proven the viability for real-time analysis. Finally, all the above-mentioned study results prove that the F-HNT@Bi₂S₃ could be used as an electrochemical probe for the detection of DFC.

Colorimetric/photothermal dual-mode sensing detection of ascorbic acid based on a Ag[i] ion/3,3',5,5'-tetramethylbenzidine (TMB) system

In this work, a novel strategy of colorimetric and photothermal dual-mode sensing determination of ascorbic acid (AA) based on a Ag⁺/3,3',5,5'-tetramethylbenzidine (TMB) system was developed. In this sensing system, Ag⁺ could oxidize TMB with a distinct color change from colorless to blue color, strong absorbance at 652 nm and a photothermal effect under 808 nm laser irradiation due to the formation of oxidized TMB (oxTMB). When AA was present, oxTMB was reduced accompanied by a change from blue to colorless, and a decrease in absorption peak intensity and the photothermal effect. AA concentration showed a negative linear correlation with the value of both the absorbance intensity at 652 nm and temperature in the range of 0.2-10 μM (A = -0.03C + 0.343 (R ², 0.9887; LOD, 50 nM); ΔT = -0.57C + 8.453 (R ², 0.997; LOD, 7.8 nM)). Based on this, a sensing approach for detection of AA was proposed with dual-mode and without the complicated synthesis of nanomaterials. The photothermal effect and colorimetric signal provided a dual-mode detection strategy for AA, overcoming the limitations of any single mode. This colorimetric and photothermal dual-mode detection has great potential in the detection of AA in clinical pharmaceuticals and the construction of portable and highly sensitive sensors.

New Formulation to Synthetize Semiconductor Bi2S3 Thin Films Using Chemical Bath Deposition for Optoelectronic Applications

Anisotropic materials possess direction dependent properties as a result of symmetry within their structure. Bismuth sulfide (Bi2S3) is an important semiconductor exhibiting anisotropy due to its crystalline and stratified structure. In this manuscript we present a new and straightforward procedure to deposit Bi2S3 thin films on soda lime glass substrates by the chemical bath deposition (CBD) technique. We studied two fundamental parameters, the time to deposit a single layer and the total number of layers deposited. The single layer deposition time was varied between 70 and 100 min and samples were coated with a total of 1, 2, or 3 layers. It is important to note that a fresh aqueous solution was used for every layer. Visible and near infra-red spectroscopy, scanning electron microscopy, X-ray photoelectrons spectroscopy, and X-ray diffraction were the characterization techniques used to study the resulting films. The calculated band gap values were found to be between 1.56 and 2.1 eV. The resulting Bi2S3 deposited films with the new formulation showed uniform morphology and orthorhombic crystalline structure with an average crystallite size of 19 nm. The thickness of the films varied from 190 to 600 nm in direct correlation to the deposition time and in agreement with the number of layers. The XPS results showed the characteristic bismuth doublet centered around 164.11 and 158.8 eV corresponding with the presence of Bi2S3. The symmetry within the Bi2S3 structure makes it a strong anisotropic crystal with potential applications in optoelectronic and photovoltaic devices, catalysis, and photoconductors among others.

Efficiency of zero-dimensional and two-dimensional graphene architectural nanocomposites for organic transformations in the contemporary environment: a review

Graphene derivatives-based nanocatalyst finds increasing utilisation in the catalysis field for organic transformations. Researchers have been working on the development of graphene oxide, reduced graphene oxide, and graphene quantum dots with metal or metal oxide nanocomposites over the last few years. These materials exhibit excellent electrical, catalytic, optical, thermal, and magnetic properties. In particular, GO/rGO/GQDs composites assisted by metal or metal oxides have attracted broad attention for their possible applications in organic compound synthesis, drug delivery, sensors, devices, and the related areas of the environment. In this review, we have summarised GO/rGO/GQDs-metal or metal oxide composites using catalyst for organic conversions and synthesis of organic compounds in accordance with the discussion on the key problems and prospects for future study. Furthermore, there is a significant function for the catalytic efficiency of composites assisted by metal or metal oxide nanocatalyst which is categorised by graphene derivatives bases.

Amino-Functionalized Perylenediimide Derivative with Dual Fluorescence Emission for the Detection of Ascorbic Acid in Vivo and Vitro

The rapid, sensitive, and selective detection of ascorbic acid (AA) is of significance in medical assays and diagnostics. In this work, a new amino perylenediimide derived (APDI) ratiometric fluorescent probe based on the specific redox reaction of cobalt oxyhydroxide (CoOOH) and AA was constructed. APDI exhibited dual fluorescence emission peaks at 549 and 596 nm with an excitation wavelength of 494 nm. In the presence of CoOOH, the dual fluorescence could be quenched. The dominant fluorescence quenching mechanism was caused by the inner filter effect. Using the red emission as a reference, the fluorescence intensity ratio (F₅₄₉ /F₅₉₆ ) was linearly correlated with the concentration of AA over a range of 0.05 to 1 μM. The limit of detection for AA was found to be 17 nM. Importantly, the probe was successfully used to detect AA in living cells. Therefore, this high sensitivity and selectivity strategy could directly survey the AA levels in real samples.

An Enzyme-Free Photoelectrochemical Sensor Platform for Ascorbic Acid Detection in Human Urine

A novel enzyme-free photoelectrochemical (PEC) potential measurement system based on Dy-OSCN was designed for ascorbic acid (AA) detection. The separation and transmission of internal carriers were accelerated and the chemical properties became more stable under light excitation due to the regular microstructure of the prepared Dy-OSCN monocrystal. More importantly, the PEC potential method (OCPT, open circuit potential-time) used in this work was conducive to the reduction of photoelectric corrosion and less interference introduced during the detection process, which effectively ensured the repeatability and stability of the electrode. Under optimal conditions, the monocrystal successfully served as a matrix for the detection of AA, and the prepared PEC sensor exhibited a wide linear range from 7.94 × 10−6 mol/L to 1.113 × 10−2 mol/L and a sensitive detection limit of 3.35 μM. Practical human urine sample analysis further revealed the accuracy and feasibility of the Dy-OSCN-based PEC platform. It is expected that such a PEC sensor would provide a new way for rapid and non-invasive AA level assessment in human body constitution monitoring and lays a foundation for the further development of practical products.

Electrochemical Biosensor Employing Bi2S3 Nanocrystals-Modified Electrode for Bladder Cancer Biomarker Detection

Bladder cancer is a kind of malignant tumor with high incidence in the urinary system, complex pathogenic causes, and the high recurrence rate. Biosensors capable of rapid, on site, and accurate bladder cancer diagnosis method continue to be lacking. Here, the electrochemical biosensor for detecting cytokeratin 18 (CK18, bladder cancer biomarker) was constructed based on the chemically modified electrode (CME). The work electrode (WE) was modified by bismuth sulfide semiconductor nanocrystals (Bi2S3 NCs), and then immobilized with CK18 antibodies and blocking agents to complete the electrode preparation. The results indicated that the interface of a flexible carbon electrode with Bi2S3 NCs film was steady with reliable charge transfer capability. With the large specific area and quantum size effect, the proposed sensor could detect CK18 antigen protein with an ultralow detection limit of 1.87 fM (fmol L−1) and wide linear dynamic range of 1–1000 pg mL−1, respectively. Detecting results could be read in less than 30 s with the portable, planar flexible CME. The sensitive and specific electrochemical biosensor possessed the characteristics of rapidity, ease-of-use, and non-invasive detection, indicating the application prospect in the early screening of bladder cancer and other diseases.