Current Progress of Magnetoresistance Sensors

Determinants of Maximum Magnetic Anomaly Detection Distance

The maximum detection distance is usually the primary concern of magnetic anomaly detection (MAD). Intuition tells us that larger object size, stronger magnetization and finer measurement resolution guarantee a further detectable distance. However, the quantitative relationship between detection distance and the above determinants is seldom studied. In this work, unmanned aerial vehicle-based MAD field experiments are conducted on cargo vessels and NdFeB magnets as typical magnetic objects to give a set of visualized magnetic field flux density images. Isometric finite element models are established, calibrated and analyzed according to the experiment configuration. A maximum detectable distance map as a function of target size and measurement resolution is then obtained from parametric sweeping on an experimentally calibrated finite element analysis model. We find that the logarithm of detectable distance is positively proportional to the logarithm of object size while negatively proportional to the logarithm of resolution, within the ranges of 1 m~500 m and 1 pT~1 μT, respectively. A three-parameter empirical formula (namely distance-size-resolution logarithmic relationship) is firstly developed to determine the most economic sensor configuration for a given detection task, to estimate the maximum detection distance for a given magnetic sensor and object, or to evaluate minimum detectable object size at a given magnetic anomaly detection scenario.

Control of Magnetic Shape Anisotropy by Nanopillar Dimensionality in Vertically Aligned Nanocomposites

Perpendicular magnetic anisotropy forms the foundation of the current data storage technology. However, there is an ever-increasing demand for higher density data storage, faster read-write access times, and lower power consuming storage devices, which requires new materials to reduce the switching current, improve bit-to-bit distributions, and improve reliability of writing with scalability below 10 nm. Here, vertically aligned nanocomposites (VANs) composed of self-assembled ferromagnetic La0.7Sr0.3MnO3 (LSMO) nanopillars in a surrounding ZnO matrix are investigated for controllable magnetic anisotropy. Confinement of LSMO into nanopillar dimensions down to 15 nm in such VAN films aligns the magnetic easy axis along the out-of-plane (i.e., perpendicular) direction, in strong contrast to the typical in-plane easy axis for strained, phase pure LSMO thin films. The dominant contribution to the magnetic anisotropy in these (LSMO)0.1(ZnO)0.9 VAN films comes from the shape of the nanopillars, while the epitaxial strain at the vertical LSMO:ZnO interfaces exhibits a negligible effect. These VAN films with their large, out-of-plane remnant magnetization of 2.6 μB/Mn and bit density of 0.77 Tbits/inch2 offer an interesting strategy for enhanced data storage applications.

Giant impurity effect on anomalous Hall effect of Mn3Sn

Mn3Sn is an anomalous Hall effect (AHE) antiferromagnet that exhibits the hysteretic AHE in antiferromagnetic (AFM) phase at room temperature. We report that whisker Mn3Sn crystals grown by the flux method exhibit a non-hysteretic AHE at mid-to-low temperatures when the whisker Mn3Sn is surrounded by a thin layer of ferromagnetic Mn2-xSn. These crystals exhibit a hysteretic AHE above 275 K due to the spin alignment of the inverse triangular lattice, which is similar to other crystals. However, upon cooling the crystal, it exhibits a non-hysteretic AHE with a spiral AFM spin structure at 100-200 K. We concluded that the non-hysteretic AHE is induced at the interface of Mn2-xSn/Mn3Sn. We believe that the scalar-spin chirality in the spiral AFM phase of Mn3Sn, modulated by Mn2-xSn through the magnetic proximity effect, produces the AHE. This discovery opens a new avenue for tailoring the AHE by magnetic layers.

A Comparative Analysis of the Magnetization Methods Used in the Magnetic Nondestructive Testing of Reinforced Concrete Structures

This work presents how significantly the proper selection of the magnetization method can improve almost all parameters of the magnetic method and affect the effectiveness of the evaluation of reinforced concrete (RC) structures. Three magnetization methods are considered in this paper: opposite pole magnetization (typical solution), same pole magnetization, and (as a reference point) no magnetization. The experiments are carried out in a three-dimensional (XYZ) space. Measurements along each of the axes are discussed in a separate section. The results show that the appropriate selection of the magnetization method can affect noise reduction, signal strength, and the separation of measurements carried out on different samples. This paper also discusses the situations when the magnetization may change the shape, cause deformations of waveforms, affect the area testing, and be used to significantly increase the efficiency of simultaneous evaluation of three basic parameters of RC structure. Experiments and simulations have proven that properly applied magnetization may strongly affect the evaluation's effectiveness, making the magnetic method one of the most promising techniques in testing RC constructions.

Hydrogenation Effect on Interlayer Coupling and Magneto-Transport Properties of Pd/Co/Mg/Fe Multilayers

Hydrogenation-induced modification of magnetic properties has been widely studied. A Mg spacer layer with high hydrogen storage stability was clamped in a Pd/Co/Mg/Fe multilayer structure to enhance its hydrogen storage stability and explore the structure's magneto-transport properties. After 1 bar hydrogen exposure, the formation of a stable MgH2 phase was demonstrated in an ambient environment at room temperature through X-ray diffraction. Lower magnetic coupling and enhanced magnetoresistance, compared to those of the as-grown sample, were observed using the longitudinal magneto-optical Kerr effect and a four-probe measurement. In this study, the hydrogenation stability of ferromagnetic multilayers was improved, and the concept of a hydrogenation-based spintronic device was developed.

Magnetic nanoprobe-enabled lateral flow assays: recent advances

In recent years, magnetic nanoparticle sensor technologies have attracted considerable interest in the point-of-care-testing (POCT) field, especially in lateral flow immunoassays (LFIAs). Although the visual signal of magnetic nanoparticles is reduced during an inspection, it can be compensated for by magnetic induction, and detection results can be quantified by magnetic sensors. Sensors that use magnetic nanoparticles (MNPs) as markers can overcome the high background noise of complex samples. In this study, MNP signal detection strategies are described from the perspectives of magnetoresistance, magnetic flux, frequency mixing technology, and magnetic permeability, and the principles and development of each technology are introduced in detail. Typical applications of magnetic nanoparticle sensor technologies are introduced. By describing the advantages and limitations of different sensing strategies, we highlight the development and improvement directions of different sensing strategies. In general, the future development of magnetic nanoparticle sensor technologies will be toward intelligent, convenient, and mobile high-performance detection equipment.

Engineering of Advanced Materials for High Magnetic Field Sensing: A Review

Advanced scientific and industrial equipment requires magnetic field sensors with decreased dimensions while keeping high sensitivity in a wide range of magnetic fields and temperatures. However, there is a lack of commercial sensors for measurements of high magnetic fields, from ∼1 T up to megagauss. Therefore, the search for advanced materials and the engineering of nanostructures exhibiting extraordinary properties or new phenomena for high magnetic field sensing applications is of great importance. The main focus of this review is the investigation of thin films, nanostructures and two-dimensional (2D) materials exhibiting non-saturating magnetoresistance up to high magnetic fields. Results of the review showed how tuning of the nanostructure and chemical composition of thin polycrystalline ferromagnetic oxide films (manganites) can result in a remarkable colossal magnetoresistance up to megagauss. Moreover, by introducing some structural disorder in different classes of materials, such as non-stoichiometric silver chalcogenides, narrow band gap semiconductors, and 2D materials such as graphene and transition metal dichalcogenides, the possibility to increase the linear magnetoresistive response range up to very strong magnetic fields (50 T and more) and over a large range of temperatures was demonstrated. Approaches for the tailoring of the magnetoresistive properties of these materials and nanostructures for high magnetic field sensor applications were discussed and future perspectives were outlined.

Heterojunctions of rGO/Metal Oxide Nanocomposites as Promising Gas-Sensing Materials—A Review

Monitoring environmental hazards and pollution control is vital for the detection of harmful toxic gases from industrial activities and natural processes in the environment, such as nitrogen dioxide (NO₂), ammonia (NH₃), hydrogen (H₂), hydrogen sulfide (H₂S), carbon dioxide (CO₂), and sulfur dioxide (SO₂). This is to ensure the preservation of public health and promote workplace safety. Graphene and its derivatives, especially reduced graphene oxide (rGO), have been designated as ideal materials in gas-sensing devices as their electronic properties highly influence the potential to adsorb specified toxic gas molecules. Despite its exceptional sensitivity at low gas concentrations, the sensor selectivity of pristine graphene is relatively weak, which limits its utility in many practical gas sensor applications. In view of this, the hybridization technique through heterojunction configurations of rGO with metal oxides has been explored, which showed promising improvement and a synergistic effect on the gas-sensing capacity, particularly at room temperature sensitivity and selectivity, even at low concentrations of the target gas. The unique features of graphene as a preferential gas sensor material are first highlighted, followed by a brief discussion on the basic working mechanism, fabrication, and performance of hybridized rGO/metal oxide-based gas sensors for various toxic gases, including NO₂, NH₃, H₂, H₂S, CO₂, and SO₂. The challenges and prospects of the graphene/metal oxide-based based gas sensors are presented at the end of the review.

Biological sensing using anomalous hall effect devices

This paper outlines an approach to biological sensing involving the use of spintronic devices to sense magnetic particles attached to biological carriers. We developed an enzyme-linked immunosorbent assay (ELISA)-based Anomalous Hall Effect magnetic sensor via surface functionalization using Triethoxysilylundecanal (TESUD). The proposed sensor uses a CoFeB/MgO heterostructure with a perpendicular magnetic anisotropy. Through several sets of magnetic layer thickness, this work also explored the optimization process of ferromagnetic layer used. Our spintronics-based biosensor is compatible with semiconductor fabrication technology and can be effectively miniaturized to integrate with semiconductor chips, which has the advantage of reduced manufacturing cost and reduced power consumption. The proposed sensor provides real-time measurement results and it is competitive to conventional biological colorimetric measurement systems in terms of accuracy and immediacy.

Impact of Magnetization on the Evaluation of Reinforced Concrete Structures Using DC Magnetic Methods

The magnetic method is the most promising method that can be used to inspect large areas of reinforced concrete (RC) structures. Magnetization is a crucial process in this method. The paper aims to present the impact of the magnetization method on the results in the detection of reinforced bars (rebars) and the evaluation of concrete cover thickness in reinforced concrete (RC) structures. Three cases (without magnetization, same pole magnetization, and opposite pole magnetization) were considered in the experiments. Results achieved in all the methods are presented and evaluated. Two different sensing elements were used in the measurements: a magneto-optical (MO) sensor and an AMR sensor. The advantages and disadvantages of both mentioned transducers are presented and discussed in the context of a large areas inspection. The new approach involves using various magnetization methods to improve measurement results for complex structures.