Individual and Combined Coatings of Chitosan and Carnauba Wax with Oregano Essential Oil to Avoid Water Loss and Microbial Decay of Fresh Cucumber

Chitosan-based nanocomposite films with carnauba wax, rosin resin, and zinc oxide nanoparticles

This work aimed to develop edible emulsion-based barriers in the form of chitosan composite films, with a focus on assessing the impacts of carnauba wax, rosin resin, and zinc oxide nanoparticles on their properties. Six films were produced by casting using chitosan as polymer base and glycerol as plasticizer. Acetic acid and polysorbate 80 were also used to facilitate the dissolution and mixing of the components. The six filmogenic solutions contained chitosan at 1.2% w/v, wax or resin content with 0 or 0.6% m/v and ZnO with 0 or 0.05% m/v. The dried films were characterized according to their chemical, barrier, mechanical, thermal and optical properties. All treatments resulted in flexible films. Chitosan films appeared smoother and more uniform under SEM imaging, while carnauba wax films displayed roughness due to their hydrophobic nature. Wax and resin films were less transparent and water soluble than the chitosan-only films. On the other hand, the addition of ZnO in the formulations increased the solubility of the films. The sorption degree was in line with the solubility results, i.e., films with ZnO presented higher sorption degree and solubility values. All treatments showed low or non-light UV transmission, indicating that the films provide good barrier to UV light. In the visible light region, films of resin with ZnO showed the lowest transmittance values, hence offering a good barrier to visible light. Among the evaluated films, chitosan, and resin films with ZnO nanoparticles were more rigid and resistant to deformation. Overall, films produced with rosin resin and ZnO nanoparticles showed potential improvements in barrier, mechanical, thermal, and optical properties, mainly due to their low water solubility, good UV protection and low permeability to water vapor and oxygen, which are suitable for using in formulations, intended to produce edible films and coatings.

Microstructural and physicochemical quality maintenance in green bell pepper infected with Botrytis cinerea and treated with thyme essential oil combined with carnauba wax

Bell pepper presents rapid weight loss and is highly susceptible to gray mold caused by the fungus Botrytis cinerea. The most employed method to control this disease is the application of synthetic fungicides such as thiabendazole (TBZ); however, its continued use causes resistance in fungi as well as environmental problems. For these reasons, natural alternatives arise as a more striking option. Currently, bell pepper fruits are coated with carnauba wax (CW) to prevent weight loss and improve appearance. Moreover, CW can be used as a carrier to incorporate essential oils, and previous studies have shown that thyme essential oil (TEO) is highly effective against B. cinerea. Therefore, this study aimed to evaluate the effect of CW combined with TEO on the development of gray mold and maintenance of microestructural and postharvest quality in bell pepper stored at 13°C. The minimal inhibitory concentration of TEO was 0.5%. TEO and TBZ provoked the leakage of intracellular components. TEO and CW + TEO treatments were equally effective to inhibit the development of gray mold. On the quality parameters, firmness and weight loss were ameliorated with CW and CW + TEO treatments; whereas lightness increased in these treatments. The structural analysis showed that CW + TEO treatment maintained the cell structure reducing the apparition of deformities. The results suggest that CW + TEO treatment could be used as a natural and effective antifungal retarding the appearance of gray mold and maintaining the postharvest quality of bell pepper. PRACTICAL APPLICATION: CW and TEO are classified as generally recognized as safe (GRAS) by the US Food and Drug Administration (FDA). This combination can be employed on the bell pepper packaging system to extend shelf life and oppose gray mold developments. Bell pepper fruits are normally coated with lipid-base coatings such as CW before commercialization; therefore, TEO addition would represent a small investment without any changes on the packaging system infrastructure.

Lipid incorporated biopolymer based edible films and coatings in food packaging: A review

In the evolving landscape of food packaging, lipid-based edible films and coatings are emerging as a sustainable and effective solution for enhancing food quality and prolonging shelf life. This critical review aims to offer a comprehensive overview of the functional properties, roles, and fabrication techniques associated with lipid-based materials in food packaging. It explores the unique advantages of lipids, including waxes, resins, and fatty acids, in providing effective water vapor, gas, and microbial barriers. When integrated with other biopolymers, such as proteins and polysaccharides, lipid-based composite films demonstrate superior thermal, mechanical, and barrier properties. The review also covers the application of these innovative coatings in preserving a wide range of fruits and vegetables, highlighting their role in reducing moisture loss, controlling respiration rates, and maintaining firmness. Furthermore, the safety aspects of lipid-based coatings are discussed to address consumer and regulatory concerns.

Efficacy of chitosan nanoparticles and wax coatings on maintaining post-harvest quality of "Murcott" mandarins

Because of its high degree of biodegradability, chitosan is widely used as a component in food packaging. However, its poor physical properties, such as permeability, limit its applicability. Consequently, applying nano chitosan is regarded as the most effective solution to this issue. In the current study, we studied the effect of using different materials in the coating process on the quality of "Murcott" mandarin during cold storage. We used different concentrations of nano chitosan (50 and 100 ppm) without wax and 100 ppm nano chitosan with wax. We investigated the impact of these compounds on the chemical composition and quality of fruits. The most successful treatment for preventing weight loss from discarded fresh fruit was a combination of wax and 100 ppm nano chitosan. This combination also prevented the deterioration of vitamin C, maintained the fruit pulp, and preserved the fruit's superior taste during cold storage and shelf life. It also maintains a better total soluble solids and total acidity level than other treatments. In addition, the activity of antioxidant enzymes and the total number of antioxidants indicates no degradation of plant tissues compared to those not coated with nano chitosan. It also reduces the microbial load on the coated fruits. Consequently, this coating combination could suggest prolonging post-harvest life and increasing the marketing period of mandarin fruits.

Advancements in coating technologies: Unveiling the potential of chitosan for the preservation of fruits and vegetables

Post-harvest losses of fruits and vegetables pose a significant challenge to the agriculture industry worldwide. To address this issue, researchers have turned to natural and eco-friendly solutions such as chitosan coatings. Chitosan, a biopolymer derived from chitin, has gained considerable attention due to its unique properties such as non-toxicity, biodegradability, biocompatibility and potential applications in post-harvest preservation. This review article provides an in-depth analysis of the current state of research on chitosan coatings for the preservation of fruits and vegetables. Moreover, it highlights the advantages of using chitosan coatings, including its antimicrobial, antifungal, and antioxidant properties, as well as its ability to enhance shelf-life and maintain the quality attributes of fresh product. Furthermore, the review discusses the mechanisms by which chitosan interacts with fruits and vegetables, elucidating its antimicrobial activity, modified gas permeability, enhanced physical barrier and induction of host defense responses. It also examines the factors influencing the effectiveness of chitosan coatings, such as concentration, molecular weight, deacetylation degree, pH, temperature, and application methods.

Fabrication, Properties, and Stability of Oregano Essential Oil and Sodium Alginate-Based Wound-Healing Hydrogels

The wound dressings fabricated by polymers and oregano essential oil (OEO) can be very effective as a hydrogel. The current study has been focused on fabricating the hydrogel membranes of oregano oil encapsulated as an antibacterial agent into sodium alginate (SA) solution by solvent casting method and then evaluated the antibacterial, antioxidant activity, and physicochemical performance of SA/OEO-based polymeric membranes. The polymeric interactions, surface morphology, water absorption capability, thermal stability, and encapsulation efficiency were investigated by FT-IR, SEM, swelling ratio, DSC, and encapsulation efficiency. The percentage encapsulation efficiency of essential oil was 40.5%. FTIR validated the presence of molecular interaction between individual components. SEM images showed a rough and porous appearance for hydrogel membranes. Moreover, DSC showed that the fabricated membranes were thermally stable. The inclusion of more content OEO decreased swelling ratios. The antioxidant test was carried out by DPPH assay and antibacterial test through disc diffusion method against microbes. The results revealed that membranes containing the highest content of OEO had more excellent antioxidant and antibacterial efficacy. Therefore, the polymeric membranes of sodium alginate loaded with oregano essential oil can be employed as an effective wound-healing candidate.

Plant Antimicrobials for Food Quality and Safety: Recent Views and Future Challenges

The increasing demand for natural, safe, and sustainable food preservation methods drove research towards the use of plant antimicrobials as an alternative to synthetic preservatives. This review article comprehensively discussed the potential applications of plant extracts, essential oils, and their compounds as antimicrobial agents in the food industry. The antimicrobial properties of several plant-derived substances against foodborne pathogens and spoilage microorganisms, along with their modes of action, factors affecting their efficacy, and potential negative sensory impacts, were presented. The review highlighted the synergistic or additive effects displayed by combinations of plant antimicrobials, as well as the successful integration of plant extracts with food technologies ensuring an improved hurdle effect, which can enhance food safety and shelf life. The review likewise emphasized the need for further research in fields such as mode of action, optimized formulations, sensory properties, safety assessment, regulatory aspects, eco-friendly production methods, and consumer education. By addressing these gaps, plant antimicrobials can pave the way for more effective, safe, and sustainable food preservation strategies in the future.

Development of water-resistant paper using chitosan and plant-based wax extracted from banana leaves

On being exposed to water, cellulose paper swells and its mechanical properties become weak. In this study, natural wax with an average particle size of 12.3 μm extracted from banana leaves was mixed with chitosan to prepare coatings applied on paper surfaces. Chitosan efficiently dispersed banana leaf-extracted wax on paper surfaces. The mixed chitosan and wax coatings considerably influenced paper properties, including yellowness, whiteness, thickness, wettability, water and oil sorption, and mechanical properties. The coating induced hydrophobicity in the paper, resulting in a significant increase in the water contact angle from 65.1 ± 7.7° (uncoated paper) to 123.2 ± 2.1°, and a decrease in water absorption by ⁓64 % to 52.6 ± 1.9 %. The coated paper demonstrated an oil sorption capacity of 212.2 ± 2.8 %, which was ⁓43 % greater than that of the uncoated paper, and the tensile strength of the coated paper improved by 43 % under wet conditions compared to the uncoated paper. Additionally, a separation of oil in water was observed for the chitosan/wax coated paper. Based on these promising results, the paper coated with chitosan and wax could be used for direct-contact packaging applications.

Investigation on the potential of applying bio-based edible coatings for horticultural products exemplified with cucumbers

Plastic packaging for fresh horticultural produce has many advantages but generates plastic waste and ecological alternatives are required. Edible coatings can retard many processes related to loss of quality. Hydrophobic lipid-based coatings are preferably applied for fresh fruits and vegetables. The approval of such coatings for products with edible peels in EU is increasingly under discussion. However, investigations on the efficiency of various edible coatings on soft-skinned fruit and vegetables are rare and it is currently unclear whether the consumer will accept them. Therefore, this study investigates (1) important characteristics of a lipid-based coating and (2) its ability to maintain the post-harvest quality of fresh cucumbers. This was evaluated by a comparative storage test under common suboptimal retail conditions (20 °C; 65% RH). The study also evaluates (3) the general perception of consumers about and their acceptance of the application of edible coatings on fresh fruit and vegetables with edible peels. The investigated coating was able to drastically reduce water loss (54-68%) and fruit respiration (approx. 33%) of fresh cucumber. The reduction of tissue stiffness was delayed by 2 days, thus, prolonged shelf life. Majority of consumer (77%) endorse the application of edible coatings as an alternative to plastic packaging, but emphasized important requirements for them.

Necrobotics: Biotic Materials as Ready-to-Use Actuators

Designs perfected through evolution have informed bioinspired animal-like robots that mimic the locomotion of cheetahs and the compliance of jellyfish; biohybrid robots go a step further by incorporating living materials directly into engineered systems. Bioinspiration and biohybridization have led to new, exciting research, but humans have relied on biotic materials-non-living materials derived from living organisms-since their early ancestors wore animal hides as clothing and used bones for tools. In this work, an inanimate spider is repurposed as a ready-to-use actuator requiring only a single facile fabrication step, initiating the area of "necrobotics" in which biotic materials are used as robotic components. The unique walking mechanism of spiders-relying on hydraulic pressure rather than antagonistic muscle pairs to extend their legs-results in a necrobotic gripper that naturally resides in its closed state and can be opened by applying pressure. The necrobotic gripper is capable of grasping objects with irregular geometries and up to 130% of its own mass. Furthermore, the gripper can serve as a handheld device and innately camouflages in outdoor environments. Necrobotics can be further extended to incorporate biotic materials derived from other creatures with similar hydraulic mechanisms for locomotion and articulation.

Nano- and micro-sized carnauba wax emulsions-based coatings incorporated with ginger essential oil and hydroxypropyl methylcellulose on papaya: Preservation of quality and delay of post-harvest fruit decay

•

Nanoemulsion with 18% carnauba wax maintained papaya quality by retarding firmness loss, color changes, and reducing respiration rates, resulting in delayed ripening.

•

Changes in flavor was not perceived by the panel in tasting samples.

•

Coatings protection level was dependent on the storage conditions.

•

GEO associated with carnauba nano-emulsions, showed a positive effect in reducing natural diseases.

Carnauba wax nano and micro-sized emulsions and hydroxypropyl methylcellulose coatings, alone or combined with ginger essential oils (GEO) were applied on papayas and evaluated under several storage conditions. In a first experiment, storage parameters were: 6 days at 22 °C, and 9 days at 13 °C followed by 5 days at 22 °C. In a second experiment, storage was: 5 days at 22 °C, and 10 days at 16 °C followed by 3 days at 22 °C. Coating effects were dependent on storage conditions. While fruits were in cold storage, there were few changes; however, at 22 °C, the differences between coatings became more evident. Nanoemulsions maintained papaya quality during storage by retarding firmness loss, color changes, and reducing respiration rates, resulting in delayed ripening. GEO exhibited some positive effect on fungal disease control. Nanoemulsion-based coatings improved shelf life by reducing weight loss, color development, and slowing ripening of papaya fruit.

Active Bionanocomposite Coating Quality Assessments of Some Cucumber Properties with Some Diverse Applications during Storage Condition by Chitosan, Nano Titanium Oxide Crystals, and Sodium Tripolyphosphate

Cucumbers have a short shelf-life of about 14 days, they are perishable due to the high moisture content. This study aimed to study the effects of nano-coating material such as titanium nanoparticles and chitosan with the addition of sodium tripolyphosphate as a crosslinker to enhance cucumber quality during storage. Some essential physical, chemical, and biological parameters were determined. CH-Nano-ST (chitosan/nano titanium oxide crystals/sodium tripolyphosphate) retained the maximum greenness, −7.99, compared to CH-Nano samples, which recorded −7.31. CH-Nano (chitosan/nano titanium oxide crystals) remained the lightest, 44.38, and CH-Nano-ST was a little darker (43.73) compared to the others treatments. The discoloration was extra severe with control (22.30), which started to spoil after the end of the first week. After 21 days of the storage period at 10 °C, the reducing sugars content reduced to reach −0.64 g/100 g and −0.21 g/100 g for CH-Nano and CH-Nano-ST treatments, respectively. The CH-Nano-ST treatment presented a lower value of toughness, followed by CH-Nano at the end of the storage period. Moreover, the highest crispness index was detected for CH-Nano (5.12%), while CH-Nano-ST treatment had a slight decline to reach 4.92%. The biological results indicated that CH-Nano-ST treatment can be applied to delay the microbial contamination of Salmonella spp. in cucumbers as it reached 0.94 log CFU/g, while the CH-Nano treatment reached 1.09 log CFU/g, at the end of the storage period. In summary, nano-coating treatments with the addition of sodium tripolyphosphate can be applied to regulator postharvest quality measurements of the biological activities in cucumbers during storage at 10 °C until 21 days.

Emerging chitosan-essential oil films and coatings for food preservation - A review of advances and applications

With the rising demand for fresh and ready-to-eat foods, antimicrobial packaging has been developed to control or prevent microbial growth as well as maintain food quality and safety. Chitosan is an advanced biomaterial for antimicrobial packaging to meet the growing needs of safe and biodegradable packaging. The application of natural essential oils as antimicrobial agents effectively controls the growth of spoilage and pathogenic microbes. Thus, chitosan edible coatings and films incorporated with essential oils have expanded the general applications of antimicrobial packaging in food products. This review summarized the effect of essential oils on modifying the physicochemical characteristics of chitosan-based films. Notably, the antimicrobial efficacy of the developed composite films or coatings was highlighted. The advances in the preparation methods and application of chitosan films were also discussed. Broadly, this review will promote the potential applications of chitosan-essential oils composite films or coatings in antimicrobial packaging for food preservation.

Disposable Food Packaging and Serving Materials-Trends and Biodegradability

Food is an integral part of everyone’s life. Disposable food serving utensils and tableware are a very convenient solution, especially when the possibility of the use of traditional dishes and cutlery is limited (e.g., takeaway meals). As a result, a whole range of products is available on the market: plates, trays, spoons, forks, knives, cups, straws, and more. Both the form of the product (adapted to the distribution and sales system) as well as its ecological aspect (biodegradability and life cycle) should be of interest to producers and consumers, especially considering the clearly growing trend of “eco-awareness”. This is particularly important in the case of single-use products. The aim of the study was to present the current trends regarding disposable utensils intended for contact with food in the context of their biodegradability. This paper has summarized not only conventional polymers but also their modern alternatives gaining the attention of manufacturers and consumers of single-use products (SUPs).

An Extensive Review of Natural Polymers Used as Coatings for Postharvest Shelf-Life Extension: Trends and Challenges

Global demand for minimally processed fruits and vegetables is increasing due to the tendency to acquire a healthy lifestyle. Losses of these foods during the chain supply reach as much as 30%; reducing them represents a challenge for the industry and scientific sectors. The use of edible packaging based on biopolymers is an alternative to mitigate the negative impact of conventional films and coatings on environmental and human health. Moreover, it has been demonstrated that natural coatings added with functional compounds reduce the post-harvest losses of fruits and vegetables without altering their sensorial and nutritive properties. Furthermore, the enhancement of their mechanical, structural, and barrier properties can be achieved through mixing two or more biopolymers to form composite coatings and adding plasticizers and/or cross-linking agents. This review shows the latest updates, tendencies, and challenges in the food industry to develop eco-friendly food packaging from diverse natural sources, added with bioactive compounds, and their effect on perishable foods. Moreover, the methods used in the food industry and the new techniques used to coat foods such as electrospinning and electrospraying are also discussed. Finally, the tendency and challenges in the development of edible films and coatings for fresh foods are reviewed.

Antimicrobial Food Packaging with Biodegradable Polymers and Bacteriocins

Innovations in food and drink packaging result mainly from the needs and requirements of consumers, which are influenced by changing global trends. Antimicrobial and active packaging are at the forefront of current research and development for food packaging. One of the few natural polymers on the market with antimicrobial properties is biodegradable and biocompatible chitosan. It is formed as a result of chitin deacetylation. Due to these properties, the production of chitosan alone or a composite film based on chitosan is of great interest to scientists and industrialists from various fields. Chitosan films have the potential to be used as a packaging material to maintain the quality and microbiological safety of food. In addition, chitosan is widely used in antimicrobial films against a wide range of pathogenic and food spoilage microbes. Polylactic acid (PLA) is considered one of the most promising and environmentally friendly polymers due to its physical and chemical properties, including renewable, biodegradability, biocompatibility, and is considered safe (GRAS). There is great interest among scientists in the study of PLA as an alternative food packaging film with improved properties to increase its usability for food packaging applications. The aim of this review article is to draw attention to the existing possibilities of using various components in combination with chitosan, PLA, or bacteriocins to improve the properties of packaging in new food packaging technologies. Consequently, they can be a promising solution to improve the quality, delay the spoilage of packaged food, as well as increase the safety and shelf life of food.

Composite Coatings of Chitosan and Alginate Emulsions with Olive Oil to Enhance Postharvest Quality and Shelf Life of Fresh Figs (Ficus carica L. cv. 'Pingo De Mel')

Fresh figs are very appreciated and have been associated with health benefits. However, these fruits are highly perishable. In this study, edible coatings were studied envisaging their positive effect in enhancing figs' shelf-life. Fig fruits cv. 'Pingo de mel' were harvested at commercial ripening stage and single emulsion-based coatings, composed of chitosan + olive oil and alginate + olive oil, were applied. After coatings application by dipping each fruit in the emulsion-based solutions at 4 °C and drying, the coated fruits were sprayed with crosslinking solutions (6% tripolyphosphate and 1% calcium chloride for chitosan and alginate-based coatings, respectively). Then, were maintained at 4 °C and analyzed after 1, 7, 14 and 19 days of storage. After each time interval, fruits were further maintained at 25 °C for 2 days. The results have shown that coatings were effective on delaying fungal decay and postharvest ripening indicators (respiration rate, mass loss, softening and total soluble solids/titratable acidity ratio). The results foresee a fruits' shelf life between 14 and 19 days under refrigeration at 4 °C that may be followed up to 2 days at ambient temperature, higher than that estimated for uncoated fruits (less than 14 days at 4 °C plus to 2 days at ambient temperature).

Characterization of Chitosan Films Incorporated with Different Substances of Konjac Glucomannan, Cassava Starch, Maltodextrin and Gelatin, and Application in Mongolian Cheese Packaging

Four kinds of edible composite films based on chitosan combined with additional substances (konjac glucomannan, cassava starch, maltodextrin and gelatin) and the addition of lysozyme were prepared and used as packaging materials for Mongolian cheese. The prepared composite films were evaluated using scanning electron microscopy and Fourier transform infrared spectroscopy. The physicochemical properties of all chitosan composite films, including thickness, viscosity, opacity, color, moisture content, water vapor permeability, tensile strength and elongation at break, were measured. The results show that Konjac glucomannan–chitosan composite film presented the strongest mechanical property and highest transparency. The cassava starch–chitosan composite film presented the highest water barrier property. The study on the storage characteristics of Mongolian cheese was evaluated at 4 °C. The results show that the cheese packaging by cassava starch–chitosan composite film presented better treatment performance in maintaining the quality, reducing weight loss and delayering microbial growth.