Research Progress of High Dielectric Constant Zirconia-Based Materials for Gate Dielectric Application

Preparation of High-Performance Transparent Al2O3 Dielectric Films via Self-Exothermic Reaction Based on Solution Method and Applications

As the competition intensifies in enhancing the integration and performance of integrated circuits, in accordance with the famous Moore's Law, higher performance and smaller size requirements are imposed on the dielectric layers in electronic devices. Compared to vacuum methods, the production cost of preparing dielectric layers via solution methods is lower, and the preparation cycle is shorter. This paper utilizes a low-temperature self-exothermic reaction based on the solution method to prepare high-performance Al2O3 dielectric thin films that are compatible with flexible substrates. In this paper, we first established two non-self-exothermic systems: one with pure aluminum nitrate and one with pure aluminum acetylacetonate. Additionally, we set up one self-exothermic system where aluminum nitrate and aluminum acetylacetonate were mixed in a 1:1 ratio. Tests revealed that the leakage current density and dielectric constant of the self-exothermic system devices were significantly optimized compared to the two non-self-exothermic system devices, indicating that the self-exothermic reaction can effectively improve the quality of the dielectric film. This paper further established two self-exothermic systems with aluminum nitrate and aluminum acetylacetonate mixed in 2:1 and 1:2 ratios, respectively, for comparison. The results indicate that as the proportion of aluminum nitrate increases, the overall dielectric performance of the devices improves. The best overall performance occurs when aluminum nitrate and aluminum acetylacetonate are mixed in a ratio of 2:1: The film surface is smooth without cracks; the surface roughness is 0.747 ± 0.045 nm; the visible light transmittance reaches up to 98%; on the basis of this film, MIM devices were fabricated, with tested leakage current density as low as 1.08 × 10-8 A/cm2 @1 MV and a relative dielectric constant as high as 8.61 ± 0.06, demonstrating excellent electrical performance.

Structure and Electrical Properties of Zirconium-Aluminum-Oxide Films Engineered by Atomic Layer Deposition

Thin films containing either multilayer ZrO2:Al2O3 structures or ZrO2 deposited on ZrxAlyOz buffer layers were characterized. The films were grown by atomic layer deposition (ALD) at 300 °C from ZrCl4, Al(CH3)3, and H2O. The multilayer ZrO2:Al2O3 structures were grown repeating different combinations of ZrO2 and Al2O3 ALD cycles while the ZrxAlyOz layers were obtained in a novel process using ALD cycles based on successive adsorption of ZrCl4 and Al(CH3)3, followed by surface reaction with H2O. The films were grown on TiN electrodes, and supplied with Ti top electrodes, whereby ZrxAlyOz films were exploited as thin buffer layers between TiN and ZrO2. The as-deposited ZrO2 films and ZrO2:Al2O3 structures with sufficiently low concentrations of Al2O3 were crystallized in the form of cubic or tetragonal ZrO2 polymorph possessing relative permittivities reaching 35. Notably, multilayered ZrO2:Al2O3 films could exhibit resistive switching behavior with ratios between low- and high-resistive-state current values, extending up to five orders of magnitude. Implications of multilevel switching were recorded. In the double-layered ZrxAlyOz-ZrO2 stacks, the ON/OFF current ratios remained below 40, but the endurance could become extended over 3000 cycles. Remarkably, instabilities, when detected in endurance behavior expressed by reduction in an ON/OFF current ratio could be compensated and the current values restored by real time readjustment of the programming voltage amplitude.

Gd3+ and Bi3+ co-substituted cubic zirconia; (Zr1−x−yGdxBiyO2−δ): a novel high κ relaxor dielectric and superior oxide-ion conductor

The high polarizability of the Bi3+ ion coupled with synergistic interaction of Bi and Gd in the host ZrO2 lattice seems to create the more labile oxide ion vacancies that enable high oxide ion conductivity at lower temperatures.