Glassy Polymers—Diffusion, Sorption, Ageing and Applications

Interfacial Reactions in Chemical Recycling and Upcycling of Plastics

Depolymerization of plastics is a leading strategy to combat the escalating global plastic waste crisis through chemical recycling, upcycling, and remediation of micro-/nanoplastics. However, critical processes necessary for polymer chain scission, occurring at the polymer-catalyst or polymer-fluid interfaces, remain largely overlooked. Herein, we spotlight the importance of understanding these interfacial chemical processes as a critical necessity for optimizing kinetics and reactivity in plastics recycling and upcycling, controlling reaction outcomes, product distributions, as well as improving the environmental sustainability of these processes. Several examples are highlighted in heterogeneous processes such as hydrogenation over solid catalysts, reaction of plastics in immiscible media, and biocatalysis. Ultimately, judicious exploitation of interfacial reactivity has practical implications in developing practical, robust, and cost-effective processes to reduce plastic waste and enable a viable post-use circular plastics economy.

All-atom molecular dynamics simulation of solvent diffusion in an unentangled polystyrene film

The diffusion behavior of low molecular weight solvents within an unentangled polystyrene film below and above its glass transition temperature is investigated. The diffusion behavior in the glassy state exhibits a distinct behavior known as case II or class II diffusion, noticeably diverging from conventional Fickian diffusion observed above the glass transition temperature of the polymer film. In the context of case II diffusion, the primary experimental observation entails the emergence of a well-defined concentration front moving at a constant speed, delineating a swollen, rubbery region from a glassy region within the polymer system. Despite the prevalence of this phenomenon in experimental settings, simulating case II diffusion has posed a significant challenge, primarily due to the computationally intensive nature of the diffusion process. To address this, we have developed an all-atom molecular dynamics simulation approach for the observation of case II diffusion in glassy polymers. This method aims to unravel the intricacies of the diffusion process, providing valuable insights into the dynamic interactions between solvents and the polymer matrix.

Molecular Characterization of Membrane Gas Separation under Very High Temperatures and Pressure: Single- and Mixed-Gas CO2/CH4 and CO2/N2 Permselectivities in Hybrid Networks

This work illustrates the potential of using atomistic molecular dynamics (MD) and grand-canonical Monte Carlo (GCMC) simulations prior to experiments in order to pre-screen candidate membrane structures for gas separation, under harsh conditions of temperature and pressure. It compares at 300 °C and 400 °C the CO₂/CH₄ and CO₂/N₂ sieving properties of a series of hybrid networks based on inorganic silsesquioxanes hyper-cross-linked with small organic PMDA or 6FDA imides. The inorganic precursors are the octa(aminopropyl)silsesquioxane (POSS), which degrades above 300 °C, and the octa(aminophenyl)silsesquioxane (OAPS), which has three possible meta, para or ortho isomers and is expected to resist well above 400 °C. As such, the polyPOSS-imide networks were tested at 300 °C only, while the polyOAPS-imide networks were tested at both 300 °C and 400 °C. The feed gas pressure was set to 60 bar in all the simulations. The morphologies and densities of the pure model networks at 300 °C and 400 °C are strongly dependent on their precursors, with the amount of significant free volume ranging from ~2% to ~20%. Since measurements at high temperatures and pressures are difficult to carry out in a laboratory, six isomer-specific polyOAPS-imides and two polyPOSS-imides were simulated in order to assess their N₂, CH₄ and CO₂ permselectivities under such harsh conditions. The models were first analyzed under single-gas conditions, but to be closer to the real processes, the networks that maintained CO₂/CH₄ and CO₂/N₂ ideal permselectivities above 2 were also tested with binary-gas 90%/10% CH₄/CO₂ and N₂/CO₂ feeds. At very high temperatures, the single-gas solubility coefficients vary in the same order as their critical temperatures, but the differences between the penetrants are attenuated and the plasticizing effect of CO₂ is strongly reduced. The single-gas diffusion coefficients correlate well with the amount of available free volume in the matrices. Some OAPS-based networks exhibit a nanoporous behavior, while the others are less permeable and show higher ideal permselectivities. Four of the networks were further tested under mixed-gas conditions. The solubility coefficient improved for CO₂, while the diffusion selectivity remained similar for the CO₂/CH₄ pair and disappeared for the CO₂/N₂ pair. The real separation factor is, thus, mostly governed by the solubility. Two polyOAPS-imide networks, i.e., the polyorthoOAPS-PMDA and the polymetaOAPS-6FDA, seem to be able to maintain their CO₂/CH₄ and CO₂/N₂ sieving abilities above 2 at 400 °C. These are outstanding performances for polymer-based membranes, and consequently, it is important to be able to produce isomer-specific polyOAPS-imides for use as gas separation membranes under harsh conditions.