Improved Corrosion Protection of Acrylic Waterborne Coating by Doping with Microencapsulated Corrosion Inhibitors

Durability and Corrosion Properties of Waterborne Coating Systems on Mild Steel Dried under Atmospheric Conditions and by Infrared Radiation

Increasing attention is given to waterborne coatings for corrosion protection due to the lower ecological impact on the environment. It has been found that by using waterborne coatings, the emission of harmful volatile organic compounds (VOCs) is reduced by more than 50 g/L. However, they require longer drying time, their anti-corrosion performance is not as good as solvent-borne coatings and they still have not been developed for all corrosion environments. Another way to reduce VOCs is by using infrared (IR) drying technology. With catalytic infrared radiation, it is possible to cure all surfaces at notably reduced costs compared to traditional systems and in total respect for the environment, thanks to significant energy savings and minimal CO₂ emissions. The aim of this paper was to evaluate corrosion protective properties of waterborne coatings which were dried with traditional and accelerated drying techniques, i.e., under atmospheric conditions and by using IR technology. Two different coating systems were applied, with and without Zn in the primer. To achieve this goal, the test samples were subjected to electrochemical, corrosion, and physical tests. It was shown that infrared technology does not affect the quality of the coating and it drastically reduces the intercoating interval. A coating system with zinc in the primer showed better overall protection properties after being subjected to impedance and salt spray testing, but generally, solvent-borne coatings still have higher durability than waterborne in extreme marine conditions according to recent research. Microstructure and porosity remained intact and the atomic force microscope confirmed that the flash-off was conducted correctly since there were no pinholes and blisters detected on the coating's surface. This study can serve as a foundation for further investigations of IC-dried waterborne coatings because there are not many at the moment.

Electrochemical and DFT Study of NaNO2/NaNO3 Corrosion Inhibitor Blends for Rebar in Simulated Concrete Pore Solution

The use of nitrite- and nitrate-based inhibitors provides corrosion protection by the development of passive oxide film on the metal surface in reinforced concrete applications. However, the impact of the nitrite and nitrate ratio in the mixture has not been widely studied. In this study, the corrosion protection provided by NaNO2:NaNO3 inhibitor blends with ratios of 0.5:1, 1:1, and 1:0.5 were studied to maximize corrosion inhibition efficiency. The nitrite species imparted higher corrosion protection, as shown by cyclic potentiodynamic polarization, with an icorr of 1.16 × 10–7 A/cm2 for the 1:0.5 mixture, lower than for both the 1:1 and 0.5:1 mixtures. Electrochemical impedance spectroscopy was also performed, with the 1:0.5 mixture consistently displaying high resistance values, showing an Rct of 1.31 × 105 Ω cm2. The effect of temperature was also assessed; the Ea’s of the corrosion reaction were calculated to be 12.1, 9.2, and 4.9 kJ/mol for the 0.5:1, 1:1, and 1:0.5 (NO2−:NO3−) mixtures, respectively. Density functional theory was applied to analyze the molecular properties and to determine the relationship between the quantum properties and corrosion inhibition. The ΔE of NO2− was found to be −5.74 eV, lower than that of NO3− (−5.45 eV), corroborating the experimental results. Lastly, commercially available inhibitor mixtures were investigated and nitrite/nitrate concentrations determined to evaluate their corrosion protection performance; amongst the two inhibitor blends tested, Sika was found to outperform Yara due to its greater NO2− concentration.

Nanostructured Coatings: Review on Processing Techniques, Corrosion Behaviour and Tribological Performance

Corrosion and tribology are surface phenomena. Modifying surfaces of materials without resorting to altering their bulk properties is an effective route to alleviate corrosion, friction and wear, encountered in engineering applications. With the advancements in the field of nanotechnology, surface protective coatings with nanomaterials can be readily developed to explore their functionality in mitigating chemical/physical damage of surfaces. Surface protection enhances performance and operating lifetimes of industrial machinery components. This review presents insights on various types of recently developed nanostructured coatings, their synthesis routes, corrosion behaviour and tribological performance. It provides the state-of-the-art information on the development of nanostructured coatings, namely, ceramic coatings, metallic coatings and nanocomposite coatings with metal and polymer matrices. Biomimetic approaches in making nanostructured coatings and challenges encountered in the development of nanostructured coatings are highlighted.