A Review of Recent Developments in Preparation Methods for Large-Area Perovskite Solar Cells

Innovative Approaches to Large-Area Perovskite Solar Cell Fabrication Using Slit Coating

Perovskite solar cells (PSCs) are gaining prominence in the photovoltaic industry due to their exceptional photoelectric performance and low manufacturing costs, achieving a significant power conversion efficiency of 26.4%, which closely rivals that of silicon solar cells. Despite substantial advancements, the effective area of high-efficiency PSCs is typically limited to about 0.1 cm2 in laboratory settings, with efficiency decreasing as the area increases. The limitation poses a major obstacle to commercialization, as large-area, high-quality perovskite films are crucial for commercial applications. This paper reviews current techniques for producing large-area perovskites, focusing on slot-die coating, a method that has attracted attention for its revolutionary potential in PSC manufacturing. Slot-die coating allows for precise control over film thickness and is compatible with roll-to-roll systems, making it suitable for large-scale applications. The paper systematically outlines the characteristics of slot-die coating, along with its advantages and disadvantages in commercial applications, suggests corresponding optimization strategies, and discusses future development directions to enhance the scalability and efficiency of PSCs, paving the way for broader commercial deployment.

Efficient and Stable Perovskite Solar Cells and Modules Enabled by Tailoring Additive Distribution According to the Film Growth Dynamics

Gas quenching and vacuum quenching process are widely applied to accelerate solvent volatilization to induce nucleation of perovskites in blade-coating method. In this work, we found these two pre-crystallization processes lead to different order of crystallization dynamics within the perovskite thin film, resulting in the differences of additive distribution. We then tailor-designed an additive molecule named 1,3-bis(4-methoxyphenyl)thiourea to obtain films with fewer defects and holes at the buried interface, and prepared perovskite solar cells with a certified efficiency of 23.75%. Furthermore, this work also demonstrates an efficiency of 20.18% for the large-area perovskite solar module (PSM) with an aperture area of 60.84 cm2. The PSM possesses remarkable continuous operation stability for maximum power point tracking of T90 > 1000 h in ambient air.

A Functional Biological Molecule Restores the PbI2 Residue-Induced Defects in Two-Step Fabricated Perovskites

Coating the perovskite layer via a two-step method is an adaptable solution for industries compared to the anti-solvent process. But what about the impact of unreacted PbI2? Usually, it is generated during perovskite conversion in a two-step method and considered beneficial within the grain boundaries, while also being accused of enhancing the interface defects and nonradiative recombination. Several additives are mixed in PbI2 precursors for the purpose of improving the perovskite crystallinity and hindering the Pb2+ defects. Herein, in lieu of adding additives to the PbI2, the effects of the PbI2 residue via the electron transport layer/perovskite interface modification are explored. Consequently, by introducing artemisinin decorated with hydrophobic alkyl units and a ketone group, it reduces the residual PbI2 and improves the perovskites' crystallinity by coordinating with Pb2+. In addition, artemisinin-deposited perovskite enhances both the stability and efficiency of perovskite solar cells by suppressing nonradiative recombination.

Wide-field-of-view optical detectors for deep ultraviolet light communication using all-inorganic CsPbBr3 perovskite nanocrystals

Optical wireless communication (OWC) links suffer from strict requirements of pointing, acquisition, and tracking (PAT) between the transmitter and receiver. Extending the narrow field-of-view (FoV) of conventional light-focusing elements at the receiver side can relax the PAT requirements. Herein, we use all-inorganic CsPbBr3 nanocrystals (NCs) to extend various optical concentrators' FOV to 60°, regardless of the original FOV values of the concentrators. Given the robustness of UV light against communication channel misalignment, the used CsPbBr3 NCs provide another advantage of converting transmitted UVC light into a green color that matches the peak absorption of the widely available Si-based detectors. We evaluated the feasibility of the reported wide FoV optical detectors by including them in deep UV OWC systems, deploying non-return-to-zero on-off keying (NRZ-OOK) and orthogonal-frequency division multiplexing (OFDM) modulation schemes. The NRZ-OOK and OFDM schemes exhibit stable communication over the 60° FoV, providing data transmission rates of 100 Mb/s and 71.6 Mb/s, respectively, a unique capability to the reported design.

Highly effective direct decomposition of organic pollutants via Ag-Zn co-doped In2S3/rGO photocatalyst

Currently, novel photocatalysts have attracted increasing attention to effectively utilizing abundant solar energy to meet the energy demands of humans and mitigate environmental burdens. In this work, we developed a novel and highly efficient photocatalyst consisting of In₂S₃ doped with two elements (Ag and Zn) and decorated with reduced graphene oxide (rGO) sheets. The crystal structure, morphology, electrical properties, and optical properties of the prepared materials were studied using various analytical techniques, and their photocatalytic activity was thoroughly investigated. It was confirmed that within 10 min, over 97% decomposition of organic dyes was achieved by using Ag-Zn co-doped In₂S₃/rGO catalyst, while only 50 and 60% decompositions were achieved by conventional pure In₂S₃ and In₂S₃/rGO nanocomposite, respectively. Its photoelectrochemical (PEC) water-splitting performance was also significantly improved (∼120%) compared with pure In₂S₃ nanoparticles. This study provides a new vision of using Ag-Zn:In₂S₃ decorated on rGO sheets as an efficient photocatalyst under solar light irradiation for environmental remediation and hydrogen production.

Evolution of Structure and Optoelectronic Properties During Halide Perovskite Vapor Deposition

The efficiency of perovskite-based solar cells has increased dramatically over the past decade to as high as 25%, making them very attractive for commercial use. Vapor deposition is a promising technique that potentially enables fabrication of perovskite solar cells on large areas. However, to implement a large-scale deposition method, understanding and controlling the specific growth mechanisms are essential for the reproducible fabrication of high-quality layers. Here, we study the structural and optoelectronic kinetics of MAPbI₃, employing in-situ photoluminescence (PL) spectroscopy and grazing-incidence small/wide-angle X-ray scattering (GI-SAXS/WAXS) simultaneously during perovskite vapor deposition. Such a unique combination of techniques reveals MAPbI₃ formation from the early stages and uncovers the morphology, crystallographic structure, and defect density evolution. Furthermore, we show that the nonmonotonous character of PL intensity contrasts with the increasing volume of the perovskite phase during the growth, although bringing valuable information about the presence of defect states.

Potassium Iodide-Modified Lead-Free Cs3Bi2I9 Perovskites for Enhanced High-Efficiency Solar Cells

Lead-free, bismuth-based perovskite solar cells (PSCs) are promising, non-toxic, and stable alternatives to lead-based PSCs, which are environmentally harmful and highly unstable under deprived air conditions. However, bismuth-based PSCs still suffer from low-power-conversion efficiency (PCE) due to their large bandgap and poor film morphology. Their poor film-forming ability is the greatest obstacle to Cs₃Bi₂I₉ progress in thin-film solar cell technology. This study synthesizes novel, lead-free perovskites with a small bandgap, excellent stability, and highly improved photovoltaic performance by integrating different amounts of potassium iodide (KI) into a perovskite precursor solution. KI incorporation improves the crystallinity of the perovskite, increases the grain size, and decreases the potential contact distribution, which is demonstrated by X-ray diffraction, electronic scanning microscopy, atomic force microscopy, and ultraviolet-visible spectroscopy. The Cs₃Bi₂I₉ PSC device with 2 vol. % incorporation of KI shows the highest PCE of 2.81% and Voc of 1.01 V as far as all the Bi-based cells fabricated for this study are concerned. The study demonstrates that incorporating KI in the Cs₃Bi₂I₉ perovskite layer highly stabilizes the resultant PSC device against humidity to the extent that it maintains 98% of the initial PCE after 90 days, which is suitable for solar cell applications. The devices also demonstrate greater resistance to airborne contaminants and high temperatures without encapsulation, opening up new possibilities for lead-free Cs₃Bi₂I₉ PSCs in future commercialization.

Roles of Inorganic Oxide Based HTMs towards Highly Efficient and Long-Term Stable PSC-A Review

In just a few years, the efficiency of perovskite-based solar cells (PSCs) has risen to 25.8%, making them competitive with current commercial technology. Due to the inherent advantage of perovskite thin films that can be fabricated using simple solution techniques at low temperatures, PSCs are regarded as one of the most important low-cost and mass-production prospects. The lack of stability, on the other hand, is one of the major barriers to PSC commercialization. The goal of this review is to highlight the most important aspects of recent improvements in PSCs, such as structural modification and fabrication procedures, which have resulted in increased device stability. The role of different types of hole transport layers (HTL) and the evolution of inorganic HTL including their fabrication techniques have been reviewed in detail in this review. We eloquently emphasized the variables that are critical for the successful commercialization of perovskite devices in the final section. To enhance perovskite solar cell commercialization, we also aimed to obtain insight into the operational stability of PSCs, as well as practical information on how to increase their stability through rational materials and device fabrication.

Photocatalytic Deposition of Nanostructured CsPbBr3 Perovskite Quantum Dot Films on Mesoporous TiO2 and Their Enhanced Visible-Light Photodegradation Properties

Herein, we report the in situ photocatalytic deposition of cesium lead bromide (CsPbBr₃) perovskite quantum dots on mesoporous TiO₂-coated fluorine-doped tin oxide (FTO/TiO₂) electrodes. The mesoporous TiO₂ layer is used as a photocatalyst to promote the following: (1) the Pb deposition from a Pb²⁺ aqueous solution and (2) the in situ Pb conversion into CsPbBr₃ perovskite in the presence of a CsBr methanolic solution without any organic capping agent. Both steps are carried out under ultraviolet light irradiation under ambient conditions without any post-treatment. The obtained FTO/TiO₂/CsPbBr₃ film was characterized by UV-vis diffuse reflectance spectroscopy, X-ray diffraction, photoluminescence spectroscopy, scanning electron microscopy, and transmission electron microscopy. The FTO/TiO₂/CsPbBr₃ heterojunction exhibited enhanced visible-light photodegradation activity demonstrated for the oxidation of curcumin organic dye as a model system. The novel and simple approach to fabricating a supported photocatalyst represents a scalable general method to use semiconductors as a platform to incorporate different perovskites, either all-inorganic or hybrid, for optoelectronic applications. The perovskite deposition method mediated by the UV light at room temperature could be further applied to flexible and wearable solar power electronics.

Layer-by-Layer Fabrication of PAH/PAMAM/Nano-CaCO3 Composite Films and Characterization for Enhanced Biocompatibility

Nanoparticle production and functionalization for various biomedical uses are still challenging. Polymer composites constituted of poly(amidoamine) (PAMAM), polyallylamine hydrochloride (PAH), and calcium carbonate (CaCO₃) nanoparticles have good biocompatibility with physiological tissue and fluids, making them excellent candidates for biomedical applications. This study investigated the characteristics of polymeric/nano-CaCO₃ composite films based on a PAH/PAMAM matrix, which were fabricated through layer-by-layer synthesis on quartz glass substrates. It was found that the as-prepared elastic moduli of the resultant (PAH/PAMAM)_n-CaCO₃ (where n represents the number of bilayers) composite films varied from 1.40 to 23.70 GPa for different degrees of cross-linking when 0.1 M nano-CaCO₃ particles were incorporated into the polymer matrix. The highly cross-linked (PAH/PAMAM)₁₅-CaCO₃ composite film had the highest recorded elastic modulus of 23.70 GPa, while it was observed that for all the composite films fabricated for the present study, the addition of the nano-CaCO₃ particles approximately doubled the elastic modulus regardless of the degree of polymerization. Live/Dead assays were used to determine whether the produced composite films were compatible with human lung fibroblast cells. The findings indicate that the (PAH/PAMAM)_7.5-CaCO₃ composite film had the most positive effect on cell growth and proliferation, with the (PAH/PAMAM)₁₅-CaCO₃ composite film demonstrating significant ion transport behavior with low impedance, which was considered good for in vivo rapid cell-to-cell communication. Therefore, the (PAH/PAMAM)_7.5-CaCO₃ and (PAH/PAMAM)₁₅-CaCO₃ composite films are potential tissue engineering biomaterials, but further studies are essential to generate more data to evaluate the suitability of these composites for this and other biomedical functions.

Perovskite Solar Cells: A Review of the Recent Advances

Perovskite solar cells (PSC) have been identified as a game-changer in the world of photovoltaics. This is owing to their rapid development in performance efficiency, increasing from 3.5% to 25.8% in a decade. Further advantages of PSCs include low fabrication costs and high tunability compared to conventional silicon-based solar cells. This paper reviews existing literature to discuss the structural and fundamental features of PSCs that have resulted in significant performance gains. Key electronic and optical properties include high electron mobility (800 cm2/Vs), long diffusion wavelength (>1 μm), and high absorption coefficient (105 cm−1). Synthesis methods of PSCs are considered, with solution-based manufacturing being the most cost-effective and common industrial method. Furthermore, this review identifies the issues impeding PSCs from large-scale commercialisation and the actions needed to resolve them. The main issue is stability as PSCs are particularly vulnerable to moisture, caused by the inherently weak bonds in the perovskite structure. Scalability of manufacturing is also a big issue as the spin-coating technique used for most laboratory-scale tests is not appropriate for large-scale production. This highlights the need for a transition to manufacturing techniques that are compatible with roll-to-roll processing to achieve high throughput. Finally, this review discusses future innovations, with the development of more environmentally friendly lead-free PSCs and high-efficiency multi-junction cells. Overall, this review provides a critical evaluation of the advances, opportunities and challenges of PSCs.

Review on Perovskite Semiconductor Field-Effect Transistors and Their Applications

Perovskite materials are considered as the most alluring successor to the conventional semiconductor materials to fabricate solar cells, light emitting diodes and electronic displays. However, the use of the perovskite semiconductors as a channel material in field effect transistors (FET) are much lower than expected due to the poor performance of the devices. Despite low attention, the perovskite FETs are used in widespread applications on account of their unique opto-electrical properties. This review focuses on the previous works on perovskite FETs which are summarized into tables based on their structures and electrical properties. Further, this review focuses on the applications of perovskite FETs in photodetectors, phototransistors, light emitting FETs and memory devices. Moreover, this review highlights the challenges faced by the perovskite FETs to meet the current standards along with the future directions of these FETs. Overall, the review summarizes all the available information on existing perovskite FET works and their applications reported so far.

Instantaneous Photocarrier Transport at the Interface in Perovskite Solar Cells to Generate Photovoltage

The instantaneous photocarrier transport of perovskite solar cells was evaluated by assessing laser-induced terahertz (THz) emission to understand carrier dynamics in perovskite solar cells. The waveform of laser-induced THz radiation from an interface between the TiO2 electron transport layer and perovskite active layer of an n-i-p perovskite solar cell with varying external bias was measured using THz-time domain spectroscopy. The amplitude of the THz radiation decreased with increasing reverse bias voltage. The waveform of the THz radiation was inverted at a strong reverse bias. The measured bias voltage dependence suggests that the transient current generated at the interface between perovskite and TiO2 owing to the higher mobility of electrons than that of holes, namely the photo-Dember effect, is the dominant source of THz radiation and the destructive contribution of the interfacial electric field inverts the transient current when a reverse bias causes a strong interfacial electric field. The significant contribution of the interfacial electric field has not been previously reported in perovskite thin films and is unique to solar cells. We believe that band bending at interfaces in perovskite solar cells will be determined from the THz emission with proper modeling.

A Facile Centrifuge Coating Method for High-Performance CsPbBr3 Compact and Crack-Free Nanocrystal Thin Film Photodetector

All-inorganic perovskite quantum dots (QDs), a promising semiconductor material, is suitable for new generation optoelectronic application. While there are many kinds of coating procedures for producing perovskite QDs peorovskite film, those methods require post-treatments and an additional dispersion support agent while still retaining pinholes and cracks. In this work, we report a facile method to produce CsPbBr3 film on a pre-patterned Pt electrode using a centrifuge coating method for photodetector (PD) application. Compact and crack-free films with ~500 nm thick from various particle sizes of 8 nm, 12 nm, and >30 nm were achieved with a suitable ratio of toluene/ethyl acetate solvent for visible light photodetector application. The optimized device has an on/off ratio of 103, detectivity of 3 × 1012 Jones, and responsivity of 6 A/W. In comparison, the on/off ratio of the device fabricated by the centrifuge coating method was 102 times higher than by the drop-coating method. The PD performance exhibited considerable moisture stability at mild high ambient temperature with no encapsulation for more than two weeks. The results suggest that this is a potential method for fabricating all inorganic perovskite nano-semiconductor films for further optoelectronic application in photodetectors, LEDs, and solar cells.

Hybrid Organic-Inorganic Perovskite Halide Materials for Photovoltaics towards Their Commercialization

Hybrid organic-inorganic perovskite (HOIP) photovoltaics have emerged as a promising new technology for the next generation of photovoltaics since their first development 10 years ago, and show a high-power conversion efficiency (PCE) of about 29.3%. The power-conversion efficiency of these perovskite photovoltaics depends on the base materials used in their development, and methylammonium lead iodide is generally used as the main component. Perovskite materials have been further explored to increase their efficiency, as they are cheaper and easier to fabricate than silicon photovoltaics, which will lead to better commercialization. Even with these advantages, perovskite photovoltaics have a few drawbacks, such as their stability when in contact with heat and humidity, which pales in comparison to the 25-year stability of silicon, even with improvements are made when exploring new materials. To expand the benefits and address the drawbacks of perovskite photovoltaics, perovskite-silicon tandem photovoltaics have been suggested as a solution in the commercialization of perovskite photovoltaics. This tandem photovoltaic results in an increased PCE value by presenting a better total absorption wavelength for both perovskite and silicon photovoltaics. In this work, we summarized the advances in HOIP photovoltaics in the contact of new material developments, enhanced device fabrication, and innovative approaches to the commercialization of large-scale devices.