Novel Edible Coating with Antioxidant and Antimicrobial Activities Based on Whey Protein Isolate Nanofibrils and Carvacrol and Its Application on Fresh-Cut Cheese

The influence of nanochitosan-incorporated edible coating on the characteristics of Pangasius (Pangasius sp.) fillet

Nanochitosan is known to have the potential to protect fish fillets, highly perishable products, as it can penetrate deep into the meat tissue and has high antibacterial activity. This study aimed to analyze the effect of nanochitosan incorporation to edible coating in inhibiting the degradation of Pangasius fillet quality during storage. The fillets were soaked with 2 % chitosan and nanochitosan concentrations (1 %, 2 %, and 3 %), stored for 15 days, and its quality was assessed periodically. On the 10th day of storage, the fillet coated with 2 % nanochitosan-incorporated edible coating (NEC) showed the lowest weight loss (1.41 ± 0.01 %) and maintained the pH close to neutral (6.92 ± 0.08), along with low TVB-N (33.55 mg N/100 g). and TPC (4.7 × 105 CFU/g) value, fulfilling the standard set by Indonesian National Standardization Agency. Based on the results, nanochitosan proved to extended the storage duration of Pangasius fillet while maintaining its quality.

A Review of Recent Developments in Edible Films and Coatings-Focus on Whey-Based Materials

Packaging for food products is particularly important to preserve product quality and shelf life. The most used materials for food packaging are plastic, glass, metal, and paper. Plastic films produced based on petroleum are widely used for packaging because they have good mechanical properties and help preserve the characteristics of food. However, environmental concerns are leading the trend towards biopolymers. Films and coatings based on biopolymers have been extensively studied in recent years, as they cause less impact on the environment, can be obtained from renewable sources or by-products, are relatively abundant, have a good coating and film-forming capacity, are biodegradable and have nutritional properties that can be beneficial to human health. Whey protein-based films have demonstrated good mechanical resistance and a good barrier to gases when at low relative humidity levels, in addition to demonstrating an excellent barrier to aromatic compounds and especially oils. The use of whey proteins for films or coatings has been extensively studied, as these proteins are edible, have high nutritional value, and are biodegradable. Thus, the main objective of this document was to review new methodologies to improve the physicochemical properties of whey protein films and coatings. Importance will also be given to the combinations of whey proteins with other polymers and the development of new techniques that allow the manipulation of structures at a molecular level. The controlled release and mass transfer of new biomaterials and the improvement of the design of films and packaging materials with the desired functional properties can increase the quality of the films and, consequently, broaden their applications.

High-compatibility properties of Aronia melanocarpa extracts cross-linked chitosan/polyvinyl alcohol composite film for intelligent food packaging

Although the active and intelligent properties of rich in anthocyanin extracts added to films have been extensively studied, there remains a sparsity of research pertaining to the miscibility of blended films. This work focused on the miscibility of the chitosan/polyvinyl alcohol (CP) film caused by the addition of Aronia melanocarpa extracts (AME), which are rich anthocyanins and phenolic acids, and its effect on physicochemical and functional properties. AME facilitated the amidation reaction and ionic interaction of chitosan in CP films, leading to loss of the crystallinity degree of chitosan. Furthermore, the crystal disruption promoted the formation of hydrogen bonds with polyvinyl alcohol (PVA) with the promoted miscibility. CP film incorporated with 8 % AME possessed the highest tensile strength (26.79 MPa), and elongation at break (66.38 %) as well as excellent ultraviolet-visible (UV-vis) light barrier property, water vapor barrier properties, due to its high miscibility degree. Moreover, this film also showed excellent antioxidant, antibacterial activity, and pH response function, which could be used to monitor the storage of highly perishable shrimp. Hence, the AME provided extra functionality and improved miscibility between chitosan and PVA, which showed great potential for the preparation of high-performance bioactive-fortified and intelligent food packaging films.

Radioprotective potential of whey protein against gamma irradiation-induced lingual damage

Introduction: Ionizing radiation (IR) is effectively used in the treatment of oral malignancies; however, it might also significantly harm the surrounding tissues. Whey protein isolate (WP) is a protein derived from milk that exhibits a wide range of bioactivities. Therefore, the present research aimed to delineate the mitigating impact of WP against gamma irradiation-induced lingual damage. Methods: Rats were randomized into 5 groups: Control (saline, orally, 14 days), WP (WP; 0.5 g/kg b. w., orally, 14 days), IR (saline, orally, 14 days, exposed to 6 and 3 Gy on days 4 and 6, respectively), WP+IR (WP was given orally for 14 days before and after IR exposure; exposed to 6 and 3 Gy on days 4 and 6, respectively), and IR+WP (WP, orally, started 24 h after 1st IR exposure till the end of the experiment) groups. Samples were collected at two-time intervals (on the 7th and 14th days). Results and Discussion: Oxidative stress was stimulated upon IR exposure in tongue, indicated by boosted malondialdehyde (MDA) level, along with a decrease in the total antioxidant capacity (TAC) level, superoxide dismutase (SOD), and catalase (CAT) activities. Additionally, IR exposure depicted an increase of serum IgE, inflammatory cytokines, including tumor necrosis factor-α (TNF-α), interleukin (IL)-6, along with overexpression mRNA levels of nuclear factor kappa-B transcription factor/p65 (NF-κB/p65), and down-regulation of nuclear factor erythroid 2-related factor 2 (NRF2) and heme oxygenase (HO-1) mRNA levels in tongue tissue. Moreover, IR triggered alterations in lingual histological architecture. The antioxidant and anti-inflammatory properties of WP mitigated oxidative damage, inflammation, and desquamation that were brought on following IR exposure. The protective administration of WP markedly decreases IR-induced lingual harm compared to the mitigation protocol. Our findings recommend WP supplements to the diets of cancer patients undergoing IR that might aid radioprotective effects.

Whey proteins as a functional food: Health effects, functional properties, and applications in food

Functional foods are defined as foods and ingredients that exhibit health benefits beyond their nutritional value. Research on functional foods is increasing rapidly as they may help prevent and manage some non-communicable diseases. Whey proteins are recognized as a high-quality nutrient source and known to contain some bioactive components. They are rich in essential amino acids such as cysteine, branched-chain amino acids such as leucine, valine, and isoleucine, and bioactive peptides. Whey proteins look promising as a potential functional food, given its antioxidant, anti-inflammatory, blood pressure lowering, anti-obesity, and appetite suppressing effects that is discussed in the literature. Whey proteins also show functional properties that play an essential role in food processing as an emulsifier, fat-replacer, gelling and encapsulating agent and are known to improve sensory and textural characteristics of food. This review focuses on the functional food aspects of whey proteins, associated health effects, and current food applications.

Recent advances in edible coatings and their application in food packaging

The food packaging industries are facing the challenge of food waste generation. This can be addressed through the use of edible coating materials. These coatings aid in extending the shelf life of food products, reducing waste. The key components of these coatings include food-grade binding agents, solvents, and fillers. The integration of polysaccharide, protein, lipids, bioactive and composite-based materials with edible coating matrix aids to combat substantial post-harvest loss of highly perishable commodities and elevates the quality of minimally processed food. The aim of this review is to introduce the concept of edible coatings and discuss the different coating materials used in the food industry, along with their properties. Additionally, this review aims to classify the coating types based on characteristic features and explore their application in various food processing industries. This review provides a comprehensive overview of edible coatings, including the integration of polysaccharides, proteins, lipids, bioactive, and composite-based materials into the coating matrix. This review also addresses the significant post-harvest loss of highly perishable commodities and emphasizes the enhancement of quality in minimally processed food. Furthermore, the antimicrobial, anti-corrosive, and edible characteristics are highlighted, showcasing their potential applications in different food packaging industries. Moreover, it also discusses the challenges, safety and regulatory aspects, current trends, and future perspectives, aiming to shed light on the commercialization and future investigation of edible coatings.

NADES blend for bioactive coating design as a sustainable strategy for postharvest control

Bioactive functional coatings constitute a trendy topic due to they reduce postharvest fruit losses worldwide. Also, they could be carriers of biocompounds providing health benefits to the consumer. In this work, an innovative natural bioactive coating based on Natural Deep Eutectic Solvents (NADES) and Larrea divaricata extract was optimized by mixture-mixture design for the management of postharvest diseases caused by Monilinia fructicola. A NADES composed of lactic acid-glucose-water (LGH) for phenolic extraction from L. divaricata was optimized by a Simplex Lattice design and response surface methodology (RSM).Then, a d-optimal mixture-mixture design was carried out in order to optimize the bioactive coating composition, being the optimal proportion of 0.7 L. divaricata-LGH extract and 0.3 NADES plasticizer (composed by glycerol, citric acid and water). The optimal biocoating achieved an in vitro antimicrobial activity of 72 % against M. fructicola. Interestingly, NADES plasticizer improves the biocoating functionality, creating a smooth and uniform surface.

A Novel Intelligent Indicator Film: Preparation, Characterization, and Application

The development of intelligent indicator film that can detect changes in food quality is a new trend in the food packaging field. The WPNFs-PU-ACN/Gly film was prepared based on whey protein isolate nanofibers (WPNFs). Anthocyanin (ACN) and glycerol (Gly) were used as the color indicator and the plasticizer, respectively, while pullulan (PU) was added to enhance mechanical properties of WPNFs-PU-ACN/Gly edible film. In the study, the addition of ACN improved the hydrophobicity and oxidation resistance of the indicator film; with an increase in pH, the color of the indicator film shifted from dark pink to grey, and its surface was uniform and smooth. Therefore, the WPNFs-PU-ACN/Gly edible film would be suitable for sensing the pH of salmon, which changes with deterioration, as the color change of ACN was completely consistent with fish pH. Furthermore, the color change after being exposed to grey was evaluated in conjunction with hardness, chewiness, and resilience of salmon as an indication. This shows that intelligent indicator film made of WPNFs, PU, ACN, and Gly could contribute to the development of safe food.

Strategies for Exploiting Milk Protein Properties in Making Films and Coatings for Food Packaging: A Review

Biopolymers of different natures (carbohydrates, proteins, etc.) recovered from by-products of industrial processes are increasingly being studied to obtain biomaterials as alternatives to conventional plastics, thus contributing to the implementation of a circular economy. The food industry generates huge amounts of by-products and waste, including unsold food products that reach the end of their shelf life and are no longer usable in the food chain. Milk proteins can be easily separated from dairy waste and adapted into effective bio-based polymeric materials. Firstly, this review describes the relevant properties of milk proteins and the approaches to modifying them for subsequent use. Then, we provide an overview of recent studies on the development of films and coatings based on milk proteins and, where available, their applications in food packaging. Comparisons among published studies were made based on the formulation as well as production conditions and technologies. The role of different additives and modifiers tested for the performances of films and coatings, such as water vapor permeability, tensile strength, and elongation at break, were reviewed. This review also outlines the limitations of milk-protein-based materials, such as moisture sensitivity and brittleness. Overall, milk proteins hold great potential as a sustainable alternative to petroleum-based polymers. However, their use in food packaging materials at an industrial level remains problematic.

Development and Application of Edible Coatings with Malva sylvestris L. Extract to Extend Shelf-Life of Small Loaf

Edible coatings that have a recognized ecological effect are an alternative to retard the processes of moisture evaporation and mold growth in bakery products. The aim of the present research was to study the influence of Malva sylvestris L. (mallow) flowers' extract on the antimicrobial activity of edible coatings of three types of polysaccharides, pectin/P/, xanthan/X/ and carboxymethylcellulose/C/, as well as to analyze their effect on the freshness and microbiological status of coated small loaves during storage. It was found that the presence of a mallow extract had a positive effect on the fungicidal and yeasticidal activities of the X and C coatings. The loaves were evaluated for their physical (moisture, color), textural (firmness and crumb firming kinetics) and microbiological characteristics. The coatings (P, X and C) with mallow extract had the strongest moisture-retaining effect on the loaves' crumb. The coatings with X and with P (with/without mallow extract) significantly slowed down the crumb firming process, and the value of the rate constant for the crumb firming (k) is the lowest for the X coating-0.1815 day^-1. The smallest changes in the crust color were reported when mallow-based coatings were used. They have also been proven to have the lowest microbial load when they are stored for up to three days. This study shows that polysaccharide edible coatings with an active mallow component have significant potential to extend the shelf life of bakery products.

Whey Protein Isolate Nanofibers Prepared by Subcritical Water Stabilized High Internal Phase Pickering Emulsion to Deliver Curcumin

This study aimed to design a Pickering emulsion (PE) stabilized by whey protein isolate nanofibers (WPINs) prepared with subcritical water (SW) to encapsulate and prevent curcumin (Cur) degradation. Cur-loaded WPINs–SW stabilized PE (WPINs–SW–PE) and hydrothermally prepared WPINs stabilized PE (WPINs–H–PE) were characterized using the particle size, zeta potential, Congo Red, CD, and TEM. The results indicated that WPINs–SW–PE and WPINs–H–PE showed regular spherical shapes with average lengths of 26.88 ± 1.11 μm and 175.99 ± 2.31 μm, and zeta potential values were −38.00 ± 1.00 mV and −34.60 ± 2.03 mV, respectively. The encapsulation efficiencies of WPINs–SW–PE and WPINs–H–PE for Cur were 96.72 ± 1.05% and 94.07 ± 2.35%. The bio-accessibility of Cur of WPINs–SW–PE and WPINs–H–PE were 57.52 ± 1.24% and 21.94 ± 2.09%. In addition, WPINs–SW–PE had a better loading effect and antioxidant activities compared with WPINs–H–PE. SW could be a potential processing method to prepare a PE, laying the foundation for the subsequent production of functional foods.

Pomace-Cassava as Antioxidant Bio-Based Coating Polymers for Cheeses

Fruit and vegetable-based materials, rich in phenolic pigments, and especially anthocyanins, have attracted attention as promising sources for bio-based antioxidant coating polymers, being a non-toxic, natural, ecofriendly, and green label solution to lower oxidation degradation in oil-water emulsion food, such as cheeses. However, could their pomaces also be used in such materials? This work has investigated the use of jabuticaba peels and red cabbage stir pomace extracts as antioxidant additives for cheese coating polymers. The antioxidant capacity of the jabuticaba-red cabbage pomace cassava-based polymer was evaluated in vitro (total phenolic, total anthocyanin content and DPPH scavenging %) and in vivo (by coating Minas Frescal cheeses and monitoring their peroxide index increase during a 9-day shelf life, at 10 °C). An in vitro characterization has indicated a high antioxidant capacity for both pomace extracts, with a higher capacity observed for the jabuticaba peels. In vivo investigations indicated that the pomace-starch coatings have protected cheeses up to 8.5 times against oxidation when compared to the control, with a synergistic protector effect among pomaces. Physical–chemical characterizations (pH, acidity, total solids, ash, total protein, fat content and syneresis) have indicated no coating interference on the cheese’s development.

Structural characterisation of amyloid-like fibrils formed by an amyloidogenic peptide segment of β-lactoglobulin

Protein nanofibrils (PNFs) represent a promising class of biobased nanomaterials for biomedical and materials science applications. In the design of such materials, a fundamental understanding of the structure–function relationship at both molecular and nanoscale levels is essential. Here we report investigations of the nanoscale morphology and molecular arrangement of amyloid-like PNFs of a synthetic peptide fragment consisting of residues 11–20 of the protein β-lactoglobulin (β-LG_11–20), an important model system for PNF materials. Nanoscale fibril morphology was analysed by atomic force microscopy (AFM) that indicates the presence of polymorphic self-assembly of protofilaments. However, observation of a single set of ¹³C and ¹⁵N resonances in the solid-state NMR spectra for the β-LG_11–20 fibrils suggests that the observed polymorphism originates from the assembly of protofilaments at the nanoscale but not from the molecular structure. The secondary structure and inter-residue proximities in the β-LG_11–20 fibrils were probed using NMR experiments of the peptide with ¹³C- and ¹⁵N-labelled amino acid residues at selected positions. We can conclude that the peptides form parallel β-sheets, but the NMR data was inconclusive regarding inter-sheet packing. Molecular dynamics simulations confirm the stability of parallel β-sheets and suggest two preferred modes of packing. Comparison of molecular dynamics models with NMR data and calculated chemical shifts indicates that both packing models are possible.

A 10-residue peptide segment of β-lactoglobulin (β-LG_11–20) forms amyloid-like fibrils as revealed by AFM, NMR, and MD simulations.

Evolution of physicochemical and antioxidant properties of whey protein isolate during fibrillization process

Whey protein isolate (WPI) fibrils have great potential for applications in future food manufacture due to their improved properties. However, the evolution of their properties during fibrillization is still not fully understood. Here, we investigate variational characteristics of WPI fibrils during formation process. WPI fibrils with a semiflexible and linear structure were formed and showed high aspect ratio after heat treatment. The conversion, fluorescence intensity and isoelectric point of WPI were increased with heating time. Moreover, the antioxidant activity of WPI was improved after fibrillization and was dependent on heating time. This could be attributed to the structure transformation of protein and the exposed amino acids with sulfur groups or aromatic side chains in the fibrillated system. Our findings move a step forward for a detailed understanding on the dynamical changes of WPI properties during fibrillization, which would provide a guidance for WPI fibril applications and future food technology development.

Preparation and Characterization of Carboxymethyl Cellulose-Based Bioactive Composite Films Modified with Fungal Melanin and Carvacrol

Preparation of biodegradable packaging materials and valorisation of food industry residues to achieve "zero waste" goals is still a major challenge. Herein, biopolymer-based (carboxymethyl cellulose-CMC) bioactive films were prepared by the addition, alone or in combination, of carvacrol and fungal melanin isolated from champignon mushroom (Agaricus bisporus) agro-industrial residues. The mechanical, optical, thermal, water vapour, and UV-Vis barrier properties were studied. Fourier-transform infrared (FT-IR) spectroscopy studies were carried out to analyse the chemical composition of the resulting films. Antibacterial, antifungal, and antioxidant activities were also determined. Both CMC/melanin and CMC/melanin/carvacrol films showed some antimicrobial activity against Escherichia coli, Staphylococcus aureus, and Candida albicans. The addition of melanin increased the UV-blocking, mechanical, water vapour barrier, and antioxidant properties without substantially reducing the transparency of the films. The addition of carvacrol caused loss of transparency, however, composite CMC/melanin/carvacrol films showed excellent antioxidant activity and enhanced mechanical strength. The developed bioactive biopolymer films have a good potential to be green bioactive alternatives to plastic films in food packaging applications.

Study on Biodegradable Chitosan-Whey Protein-Based Film Containing Bionanocomposite TiO2 and Zataria multiflora Essential Oil

In our research, a composite film of whey protein isolate (WPI)/chitosan incorporated with TiO2 nanoparticles (NPs) and essential oil of Zataria multiflora (ZEO) was developed. The resulting composite films were evaluated by FTIR, SEM, and XRD, and also the physicochemical characteristics including color, mechanical properties, swelling ratio, and water vapor permeability (WVP) were studied. SEM graphs exhibited that the samples had a uniform and homogeneous structure where TiO2 NPs and ZEO were well dispersed. FTIR and XRD findings also show that the hydrogen bonds and hydrophobic interactions are the main interactions between the composite WPI/chitosan and TiO2. The crystalline nature of the composite samples increased with the increase of NP content. Nevertheless, ZEO had an insignificant effect on the functional groups and the crystallinity of composite samples. The film visual characterization revealed that, by adding and increasing the TiO2 and TiO2-ZEO, sample lightness and opacity significantly increased. Additions of TiO2 remarkably (p<0.05) improved the water vapor and mechanical properties of composite samples, although the loading of ZEO, regardless of TiO2 incorporation, led to a considerable decrement of these properties. Furthermore, composite films containing ZEO combined with 2% of TiO2 compared with 1% of NPs blended with ZEO had strong antimicrobial properties against Staphylococcus aureus, Escherichia coli, and Listeria monocytogenes. Generally, the findings proposed that the addition of TiO2 reinforces the properties of composite films with a synergistic effect of ZEO loading on the antibacterial ability, by which the resulting biodegradable composite samples can be used as a food active packaging material.