Effect of Transglutaminase Cross-Linking in Protein Isolates from a Mixture of Two Quinoa Varieties with Chitosan on the Physicochemical Properties of Edible Films

Insights into recent innovations in barrier resistance of edible films for food packaging applications

The utilization of biopolymer-based food packaging holds significant promise in aligning with sustainability goals and enhancing food safety by offering a renewable, biodegradable, and safer alternative to traditional synthetic polymers. However, these biopolymer-derived films often exhibit poor barrier and mechanical properties, potentially limiting their commercial viability. Desirable barrier properties, such as moisture and oxygen resistance, are critical for preserving and maintaining the quality of packaged food products. This review comprehensively explores different traditional and advance methodologies employed to access the barrier properties of edible films. Additionally, this review thoroughly examines various approaches aimed at enhancing the barrier properties of edible films, such as the fabrication of multilayer films, the selection of biopolymers for composite films, as well as the integration of plasticizers, crosslinkers, hydrophobic agents, and nanocomposites. Moreover, the influence of process conditions, such as preparation techniques, homogenization, drying conditions, and rheological behavior, on the barrier properties of edible films has been discussed. The review provides valuable insights and knowledge for researchers and industry professionals to advance the use of biopolymer-based packaging materials and contribute to a more sustainable and food-safe future.

Advances in transglutaminase cross-linked protein-based food packaging films; a review

Pushed by the environmental pollution and health hazards of plastic packaging, the development of biodegradable food packaging films (FPFs) is a necessary and sustainable trend for social development. Most protein molecules have excellent film-forming properties as natural polymer matrices, and the assembled films have excellent barrier properties, but show defects such as low water resistance and poor mechanical properties. In order to improve the performance of protein-based films, transglutaminase (TG) is used as a safe and green cross-linking (CL) agent. This work covers recent developments on TG cross-linked protein-based FPFs, mainly comprising proteins of animal and plant origin, including gelatin, whey protein, zein, soy proteins, bitter vetch protein, etc. The chemical properties and reaction mechanism of TG are briefly introduced, focusing on the effects of TG CL on the physicochemical properties of different protein-based FPFs, including barrier properties, water resistance, mechanical properties and thermal stability. It is concluded that the addition of TG can significantly improve the physical and mechanical properties of protein-based films, mainly improving their water resistance, barrier, mechanical and thermal properties. It is worth noting that the effect of TG on the properties of protein-based films is not only related to the concentration of TG added, but also related to CL temperature and other factors. Moreover, TG can also be used in combination with other strategies to improve the properties of protein-based films.

A comparative study of the impacts of preparation techniques on the rheological and textural characteristics of emulsion gels (emulgels)

A subtype of soft solid-like substances are emulsion gels (emulgels; EGs). These composite material's structures either consist of a network of aggregated emulsion droplets or a polymeric gel matrix that contains emulsion droplets. The product's rheological signature can be used to determine how effective it is for a specific application. The interactions between these structured system's separate components and production process, however, have a substantial impact on their rheological imprint. Therefore, rational comprehension of interdependent elements, their structural configurations, and the resulting characteristics of a system are essential for accelerating our progress techniques as well as for fine-tuning the technological and functional characteristics of the finished product. This article presents a comprehensive overview of the mechanisms and procedures of producing EGs (i.e., cold-set and heat-set) in order to determine the ensuing rheological features for various commercial applications, such as food systems. It also describes the influence of these methods on the rheological and textural characteristics of the EGs. Diverse preparation methods are the cause of the rheological-property correlations between different EGs. In many ways, EGs can be produced using various matrix polymers, processing techniques, and purposes. This may lead to various EG matrix structures and interactions between them, which in turn may affect the composition of EGs and ultimately their textural and rheological characteristics.

Impact of adding prebiotics and probiotics on the characteristics of edible films and coatings- a review

Nowadays, conventional packaging materials made using non-renewable sources are being replaced by more sustainable alternatives such as natural biopolymers (proteins, polysaccharides, and lipids). Within edible packaging, one can differentiate between edible films or coatings. This packaging can be additivated with bioactive compounds to develop functional food packaging, capable of improving the consumer's state of health. Among the bioactive compounds that can be added are probiotics and prebiotics. This review novelty highlighted recent research on edible films and coatings additivated with probiotics and prebiotics, the interactions between them and the matrix and the changes in their physic, chemical and mechanical properties. When bioactive compounds are added, critical factors must be considered when selecting the most suitable production processes. Particularly, as probiotics are living microorganisms, they are more sensitive to certain factors, such as pH or temperature, while prebiotic compounds are less problematic. The interactions that occur inside the matrix can be divided into two main groups: covalent bonding (-NH₂, -NHR, -OH, -CO₂H, etc) and non-covalent interactions (van der Waals forces, hydrogen bonding, hydrophobic and electrostatic interactions). When probiotics and prebiotics are added, covalent and non-covalent interactions are modified. The physical and mechanical properties of films and coatings depend directly on the interactions that take place between the biopolymers that form their matrix. Greater knowledge about the influence of these compounds on the interactions that occur inside the matrix will allow better control of these properties and better understanding of the behaviour of edible packaging additivated with probiotics and prebiotics.

Edible hyaluronic acid-rich burger separator discs prepared from slaughterhouse waste

In this study, edible films from chicken feet extract (CF), ovine muscle fascia extract (MF), and bovine bone gelatin powder (Gel) were prepared and their characteristics were analyzed. We also used the films as separators of burger cuts and evaluated the organoleptic characteristics of cooked burgers. Hyaluronic acid quantities of CF and MF were measured using colorimetric and spectrophotometry. Results indicated that the concentration of hyaluronic acid in CF (124.11 ppm) was greater than MF (101.11 ppm). The antioxidative property of the CF film (18.47%) was greater than the Gel (1.88%) and MF (Undetectable) films. The CF film was more resistant to water vapor permeability (2.75 × 10-9 g/m.s.pa) than the MF (1.57 × 10-8 g/m.s.pa) and Gel (1.5 × 10-7 g/m.s.pa) films. The Gel film had more appropriate mechanical properties than CF and MF films. The films kept burgers patties independent from one another and prevented them from sticking and freezing together. MF and CF films were able to promote the organoleptic properties of cooked burgers in taste and texture.

Whey protein isolate/jujube polysaccharide-based edible nanocomposite films reinforced with starch nanocrystals for the shelf-life extension of banana: Optimization and characterization

The formulation of new bionanocomposite (BNC) films using whey protein isolates (WPI, 3.3-11.7 %)-jujube polysaccharide (JPS, 1.59-18.41 %)/starch nanocrystals (SNCs, 0.32-3.68 %) blends was optimized. The ultrasound-assisted acid hydrolysis produced ~63.1 nm SNCs from native starch with -24.3 mV ζ-potential. The extracted JPS purification led to a single symmetrical peak for galactoarabinan-rich fraction (1.35 × 10⁵ Da). The optimal levels of barrier (oxygen (11.85 cm³ m^-2 d^-1 atm^-1) and water vapor (3.22 × 10^-10 g m^-1 s^-1 Pa^-1) permeability rate), optical (opacity index (2.7 AU μm^-1), total color difference (18.69), and whiteness index (77.40)), and thermal (glass transition temperature (-8.29 °C) and melting point (110.38 °C)) properties were obtained at 5.0 % WPI, 15.0 % JPS, and 3.0 % SNCs. The film-forming solution of optimal BNCs had a significant antibacterial effect against Staphylococcus aureus and Escherichia coli. The improved crystallinity of BNCs at an optimal SNC level was confirmed by the XRD. The AFM and SEM images confirmed a continuous and uniform network for the optimal BNCs without any pores or cracks accompanied by low surface roughness. The FTIR spectroscopy proved covalent interaction and hydrogen bonding among chemical functional groups of WPI and JPS reinforced with SNCs. The optimal BNC could preserve banana fruits with favorable physicochemical and microbial quality during storage.

Properties and Biodegradability of Films Based on Cellulose and Cellulose Nanocrystals from Corn Cob in Mixture with Chitosan

The increase in consumer demand for more sustainable packaging materials represents an opportunity for biopolymers utilization as an alternative to reduce the environmental impact of plastics. Cellulose (C) and chitosan (CH) are attractive biopolymers for film production due to their high abundance, biodegradability and low toxicity. The objective of this work was to incorporate cellulose nanocrystals (NC) and C extracted from corn cobs in films added with chitosan and to evaluate their properties and biodegradability. The physicochemical (water vapor barrier, moisture content, water solubility and color) and mechanical properties of the films were evaluated. Component interactions using Fourier-transform infrared (FTIR) spectroscopy, surface topography by means of atomic force microscopy (AFM), biodegradability utilizing a fungal mixture and compostability by burying film discs in compost were also determined. The C-NC-CH compared to C-CH films presented a lower moisture content (17.19 ± 1.11% and 20.07 ± 1.01%; w/w, respectively) and water vapor permeability (g m−1 s−1 Pa−1 × 10−12: 1.05 ± 0.15 and 1.57 ± 0.10; w/w, respectively) associated with the NC addition. Significantly high roughness (Rq = 4.90 ± 0.98 nm) was observed in films added to NC, suggesting a decreased homogeneity. The biodegradability test showed larger fungal growth on C-CH films than on CH films (>60% and <10%, respectively) due to the antifungal properties of CH. C extracted from corn cobs resulted in a good option as an alternative packaging material, while the use of NC improved the luminosity and water barrier properties of C-CH films, promoting strong interactions due to hydrogen bonds.

Proteins from pseudocereal seeds: solubility, extraction, and modifications of the physicochemical and techno-functional properties

Pseudocereals (amaranth, buckwheat and quinoa) are emerging as popular gluten-free crops. This may be attributed to their wide-ranging health benefits, including antioxidant, hypoglycemic and serum-cholesterol reducing properties. Proteins of these crops have a high nutritional quality as a result of the presence of essential amino acids. Additionally, amaranth, buckwheat and quinoa proteins (AP, BP and QP, respectively) have physicochemical properties that are useful for the manufacture of different types of food. However, native pseudocereal proteins demonstrate a low solubility in water, mainly because of their composition. The major components of these proteins are albumins (water-soluble) and globulins (salt-soluble), although some proportions of glutelin (alkali-soluble) and prolamins (alcohol-soluble) are also found. The most commonly used method for extracting pseudocereal proteins is the alkaline extraction method, which may contribute to the low solubility of pseudocereal protein. Fortunately, different methods for modifying physicochemical (or techno-functional) properties have been proposed to extend their industrial application. For example, high-intensity ultrasound (HIUS) proved useful for improving the solubility of API and QP. Heating can allow for the formation of soluble aggregates of QP. The combination of heating and HIUS can improve the digestibility, solubility and foam properties of AP. Conjugation through the Maillard reaction can improve BPI and QP interfacial properties. Thus, present study provides a review of the solubility, extraction and modification of the techno-functional properties of AP, BP and QP. © 2022 Society of Chemical Industry.

Pea protein composition, functionality, modification, and food applications: A review

The demand for proteins continues to increase due to their nutritional benefits, the growing world population, and rising protein deficiency. Plant-based proteins represent a sustainable source to supplement costly animal proteins. Pea (Pisum sativum L.) is one of the most produced plant legume crops in the world and contributes to 26% of the total pulse production. The average protein content of pea is about 20%-25%. The commercial utilization of pea proteins is limited, partially due to its less desirable functionalities and beany off-flavor. Protein modification may change these properties and broaden the application of pea proteins in the food industry. Functional properties such as protein solubility, water and oil holding capacity, emulsifying/foaming capacity and stability, and gelation can be altered and improved by enzymatic, chemical, and physical modifications. These modifications work by affecting protein chemical structures, hydrophobicity/hydrophilicity balance, and interactions with other food constituents. Modifiers, reaction conditions, and degree of modifications are critical variables for protein modifications and can be controlled to achieve desirable functional attributes that may meet applications in meat analogs, baking products, dressings, beverages, dairy mimics, encapsulation, and emulsions. Understanding pea protein characteristics will allow us to design better functional ingredients for food applications.

Lactoferrin particles assembled via transglutaminase-induced crosslinking: Utilization in oleogel-based Pickering emulsions with improved curcumin bioaccessibility

In this study, the optimal environmental condition for preparation of lactoferrin particles assembled via transglutaminase-induced crosslinking (TG-LF particles) was pH 8, 100 U/g of TG concentration, 50 °C and 2 h of crosslinking time. Contact angle of TG-LF particles was 79°. Then, corn oil-based oleogels were prepared with carnauba wax (CW), behenyl alcohol (BA) and CW-BA mixture at 1:4 ratio (MT). To investigate the effect of oleogels on oleogel-based Pickering emulsions, oleogel-based Pickering emulsions were prepared by a two-step method using different oleogels as the oil phase and the TG-LF particles as the emulsifier. In vitro digestion study revealed that CW oleogel-based Pickering emulsion had the highest lipolysis rate and curcumin bioaccessibility. This study demonstrated that TG-LF particle-stabilized oleogel-based Pickering emulsions had good performance in curcumin delivery, which provided a new idea for the preparation of Pickering emulsifier and enriched the knowledge in the field of oleogel-based Pickering emulsion.

Protein-Based Films and Coatings for Food Industry Applications

Food packaging is an area of interest not just for food producers or food marketing, but also for consumers who are more and more aware about the fact that food packaging has a great impact on food product quality and on the environment. The most used materials for the packaging of food are plastic, glass, metal, and paper. Still, over time edible films have become widely used for a variety of different products and different food categories such as meat products, vegetables, or dairy products. For example, proteins are excellent materials used for obtaining edible or non-edible coatings and films. The scope of this review is to overview the literature on protein utilization in food packages and edible packages, their functionalization, antioxidant, antimicrobial and antifungal activities, and economic perspectives. Different vegetable (corn, soy, mung bean, pea, grass pea, wild and Pasankalla quinoa, bitter vetch) and animal (whey, casein, keratin, collagen, gelatin, surimi, egg white) protein sources are discussed. Mechanical properties, thickness, moisture content, water vapor permeability, sensorial properties, and suitability for the environment also have a significant impact on protein-based packages utilization.

Rheological and Antimicrobial Properties of Chitosan and Quinoa Protein Filmogenic Suspensions with Thyme and Rosemary Essential Oils

Food packaging faces the negative impact of synthetic materials on the environment, and edible coatings offer one alternative from filmogenic suspensions (FS). In this work, an active edible FS based on chitosan (C) and quinoa protein (QP) cross-linked with transglutaminase was produced. Thyme (T) and rosemary (R) essential oils (EOs) were incorporated as antimicrobial agents. Particle size, Z potential, and rheological parameters were evaluated. The antimicrobial activity against Micrococcus luteus (NCIB 8166) and Salmonella sp. (Lignieres 1900) was monitored using atomic force microscopy and image analysis. Results indicate that EOs incorporation into C:QP suspensions did not affect the Z potential, ranging from -46.69 ± 3.19 mV to -46.21 ± 3.83 mV. However, the polydispersity index increased from 0.51 ± 0.07 to 0.80 ± 0.04 in suspensions with EO. The minimum inhibitory concentration of active suspensions against Salmonella sp. was 0.5% (v/v) for thyme and 1% (v/v) for rosemary. Entropy and fractal dimension of the images were used to confirm the antimicrobial effect of EOs, which modified the surface roughness.

Microbial Transglutaminase as a Tool to Improve the Features of Hydrocolloid-Based Bioplastics

Several proteins from animal and plant origin act as microbial transglutaminase substrate, a crosslinking enzyme capable of introducing isopeptide bonds into proteins between the aminoacids glutamines and lysines. This feature has been widely exploited to modify the biological properties of many proteins, such as emulsifying, gelling, viscosity, and foaming. Besides, microbial transglutaminase has been used to prepare bioplastics that, because made of renewable molecules, are able to replace the high polluting plastics of petrochemical origin. In fact, most of the time, it has been shown that the microbial enzyme strengthens the matrix of protein-based bioplastics, thus, influencing the technological characteristics of the derived materials. In this review, an overview of the ability of many proteins to behave as good substrates of the enzyme and their ability to give rise to bioplastics with improved properties is presented. Different applications of this enzyme confirm its important role as an additive to recover high value-added protein containing by-products with a double aim (i) to produce environmentally friendly materials and (ii) to find alternative uses of wastes as renewable, cheap, and non-polluting sources. Both principles are in line with the bio-economy paradigm.

Black Edible Films from Protein-Containing Defatted Cake of Nigella sativa Seeds

Black biodegradable/edible protein-based films were prepared from defatted cake waste obtained from Nigella sativa (black cumin) seeds as by-product of oil extraction process. The effects of pH, glycerol concentrations, and transglutaminase-catalyzed protein cross-linking activity on the stability of film-forming solutions were studied to determine the best experimental conditions to produce handleable films. Proteins contained in the analyzed defatted cake were shown to be able to act as transglutaminase acyl donor and acceptor substrates being polymerized when incubated in vitro in the presence of the enzyme. Film-forming solutions containing 20% glycerol and casted at pH 8.0 after treatment with the enzyme gave rise to morphologically more homogeneous films possessing mechanical and barrier properties, as well as antimicrobial activity, compatible with their possible applications as food packaging materials and mulching sheets. These findings confirm the validity of the strategy to consider the seed oil processed cakes as protein-based renewable sources to produce not only fertilizers, animal feed, or culinary food but also further valuable products such as bioplastics.