Evaluation of Cyclodextrins as Environmentally Friendly Wettability Modifiers for Enhanced Oil Recovery

Microwave-ultrasonic assisted extraction of lignin to synthesize new nano micellar organometallic surfactants for refining oily wastewater

In this work, a beneficial approach for efficient depolymerization of lignin and controllable product distribution is provided. Lignin, an abundant aromatic biopolymer, has the potential to produce various biofuels and chemical adsorption agents and is expected to benefit the future circular economy. Microwave-ultrasonic (MW/US) assisted efficient depolymerization of lignin affords some aromatic materials used in manufacturing the starting material to be investigated. Some nano organometallic surfactants (NOMS) based on Ni2+, Cu2+, Co2+, Fe3+, and Mn2+ besides 2-hydroxynaphth-sulphanilamide are synthesized to enhance oil recovery (EOR). In this work, the assessment of the NOMS's efficiency was improving the heavy oil recovery via the study of the dynamic interfacial tension (IFT), contact angle, and chemical flooding scenarios. The NOMS-Ni2+ exhibited the maximum reduction of viscosity and yield values. Dropping the viscosity to 819.9, 659.89, and 499.9 Pa s from blank crude oil viscosity of 9978.8, 8005.6, and 5008.6 Pa s respectively at temperatures of 40, 60, and 80 °C was investigated. The reduction of τB values was obtained also by OMS-Ni2+. The minimum IFT was recorded against the Ni2+ derivatives (0.1 × 10-1 mN m-1). The complete wettability alteration was achieved with the NOMS-Ni2+ surfactant (ɵ ≅ 6.01 ) . The flooding test has been steered in 3 sets using the sand-packed model as a porous media at surfactant concentrations (1, 1.5, 2 and 2.5%) at 50 °C and 499 psi as injection pressure. The best value (ORs) formed for NOMS-Ni2+ were 62, 81, 85.2, and 89% respectively as compared with other NOMS-M2+ at the same concentrations. The mechanism of alternating wettability was described in the text. The rheology of the used heavy crude oil was investigated under temperatures of 40, 60, and 80 °C.

A New Synergistic Strategy for Virus and Bacteria Eradication: Towards Universal Disinfectants

In response to the COVID-19 and monkeypox outbreaks, we present the development of a universal disinfectant to avoid the spread of infectious viral diseases through contact with contaminated surfaces. The sanitizer, based on didecyldimethylammonium chloride (DDAC), N,N-bis(3-aminopropyl)dodecylamine (APDA) and γ-cyclodextrin (γ-CD), shows synergistic effects against non-enveloped viruses (poliovirus type 1 and murine norovirus) according to the EN 14476 standard (≥99.99% reduction of virus titer). When a disinfectant product is effective against them, it can be considered that it will be effective against all types of viruses, including enveloped viruses. Consequently, "general virucidal activity" can be claimed. Moreover, we have extended this synergistic action to bacteria (P. aeruginosa, EN 13727). Based on physicochemical investigations, we have proposed two independent mechanisms of action against bacteria and non-enveloped viruses, operating at sub- and super-micellar concentrations, respectively. This synergistic mixture could then be highly helpful as a universal disinfectant to avoid the spread of infectious viral or bacterial diseases in community settings, including COVID-19 and monkeypox (caused by enveloped viruses).

Improvement of Heavy Oil Recovery by Nonionic Surfactant/Alcohol Flooding in Light of the Alkane Carbon Number and Interfacial Tension Properties

In this work, we prepared nonionic surfactants from waste cooking oil materials. Hydrolysis was carried out for palm and palm kernel waste cooking oils to get a mixture of free fatty acids. The mixture of free acids was esterified with sorbitan and then ethoxylated at different ethylene oxide units. Two surfactants exhibited promising surface-active properties among the six prepared surfactants based on the results of surface tension. The interfacial tension (IFT) around the critical micelle concentration was measured against a series of n-hydrocarbon to detect the minimum alkane carbon number (ACN) (Π_min) for each of these surfactants. The effect of normal and branched alcohols on Π_min was also studied to design the surfactant/alcohol mixture for the chemical flooding process. From the results of IFT, the ethoxylated ester derivatives of palm kernel fatty acids (EPK-20) exhibited minimum IFT γ_min (0.06 mN m^-1) at Π_min equal to 12, and the ethoxylated ester derivatives of palm fatty acids (EP-40) achieved γ_min equal to 0.09 mN m^-1 at Π_min of 10. Branched alcohols shifted Π_min to a higher value to reach the equivalent ACN of the crude oil and decrease the IFT to lower values. The flooding process showed that the maximum oil recovery was obtained by EPK-20 (54.2% when used purely and 66.2% when used with isoamyl alcohol). In comparison, EP-40 exhibited that oil recovery equals 46% without alcohol and 46.4% with iso-butanol alcohol. The results were interpreted and discussed based on interfacial properties, wettability alteration, and the ACN.

Colloids and Interfaces in Oil Recovery

The role of surface and colloid chemistry in the petroleum industry is of great importance to the many current and future challenges confronting this sector [...]