Electrochemical Behaviour of Real-Time Sensor for Determination Mercury in Cosmetic Products Based on PANI/MWCNTs/AuNPs/ITO

Fabrication of a sensitive electrochemical sensor based on hybrid polyamide/chromotropic acid nanofibers electrospun on glassy carbon electrode for Hg2+ sensing in drinking water and canned fish samples

In this study, a new electrochemical sensor was designed based on a hybrid of polyamide (PA) and chromotropic acid (CA) nanofibers electrospun on a glassy carbon electrode (GCE) configured as PANFs-CANFs/GCE. The electrochemical response of this sensor showed an excellent electrochemical activity for the detection of Hg²⁺ ions using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) methods. The proposed sensor exhibited the prominent electrocatalytic value of (α = 0.60, Log Ks = 3.45 s^-1 and Γ = 3.30 × 10 ^-9 mmol/cm²) as a result of PANFs-CANFs/GCE response to Hg²⁺ ions. The recommended sensor also demonstrated a linear portion in the calibration curve over the concentration range of 30 to 450 nM with the limit of detection (LOD) and limit of quantitation (LOQ) of 9.98 nM and 29.97 nM, respectively. The fabricated sensor revealed reproducible and repeatable responses with a high level of stability. Therefore, we highly recommend this new electro-spun based sensor for quantifying Hg²⁺ in drinking water and canned fish samples with the accurate and precise results and no side interferences.

Novel Amperometric Mercury-Selective Sensor Based on Organic Chelator Ionophore

A novel amperometric sensor for the direct determination of toxic mercury ions, Hg²⁺, based on the organic chelator ionophore N, N di (2-hydroxy-5-[(4-nitrophenyl)diazenyl]benzaldehyde) benzene-1,2-diamine (NDBD), and multiwalled carbon nanotubes (MWCNT) immobilized on a glassy carbon electrode surface was developed. The parameters influencing sensor performance including the ionophore concentration, the applied potential, and electrolyte pH were optimized. The sensor response to Hg²⁺ was linear between 1-25 µM with a limit of detection of 60 nM. Interferences from other heavy metal ions were evaluated and the sensor showed excellent selectivity towards Hg²⁺. The method was successfully applied to the determination of mercury ions in milk and water samples.

Rapid saline-alkali sensitivity testing using hydrogel/gold nanoparticles-modified screen-printed electrodes

Rapid screening of microorganisms with good saline-alkali tolerance is of great significance for the improvement of saline-alkali land. In this study, a novel electrochemical method was developed for the rapid screening of saline-alkali-tolerant bacteria using a hydrogel/gold nanoparticles-modified screen-printed electrode. Monitoring bacterial growth using electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV) yielded a new method to measure saline-alkali sensitivity. The strains were deposited on agarose hydrogel-AuNPs composite-modified electrodes with saline-alkali treatment control at a concentration of 50 mM. The electrochemical-derived growth curve of each bacterial strain was established to monitor the effect of saline-alkaline conditions on bacterial growth. The results showed that E. coli could grow on the hydrogel-AuNPs composite-modified electrodes without saline and alkali, while the growth of E. coli was inhibited after adding saline and alkali to the modified electrodes. In contrast, Paenibacillus lautus (HC_A) and Lysinibacillus fusiformis (HC_B) were able to grow on electrodes containing saline-alkali hydrogel-AuNPs composite modification. This fast growth curves of the strains derived from electrochemical analysis indicate that the possible time for salinity sensitivity results is <45 min. Compared to the traditional bacterial culture method lasting at least 1-2 days, this method has the clear advantages of rapidity, high efficiency, and low cost.